What should I do if the inside of the tile gap is moldy and dirty

1. First use a small shovel to clean up the tile gaps, remove the debris inside, and then apply the prepared beauty grout along the tile gaps.

2. You can first wipe the black and moldy place, and then fill the toilet paper with 84 water, spread it in the blackened place, and remove it after the toilet paper is dry.

3. When using it, you can dilute the hydrochloric acid and brush it back and forth on the black gap several times with a brush, and the effect is very good. However, due to the corrosive and pungent taste of hydrochloric acid, we should take protective measures when using it.

4. The humidity of the bathroom is usually relatively large, and the requirements for the tiles are waterproof, anti-slip and wear-resistant. Cleaning the tiles with soap and a little ammonia and turpentine can make them shinier.

Recently, the ceramic tile seam service in the home improvement market has been born, and various beauty seams have also come into being.

The answer is yes, in a humid environment, tile joints are very easy to mold and black, for the sake of environmental hygiene and beauty, it is necessary to do a tile joint.

As we all know, the master will leave a little gap when applying tiles to prevent expansion and insufficient space after cold and hot changes, resulting in fracture and arching.

However, after leaving the seams, these places are particularly easy to hide dirt and dirt, so the tile beauty seam industry has emerged. If you don't do the sewing, it will be very difficult to clean it up until the edges are blackened.

The ** tile seam is in the range of 20 to 30 yuan per square meter, ** is not very expensive, a normal house is about two or three thousand yuan, compared with other decoration projects, this is very affordable**.

At present, there are two kinds of ingredients of beauty sewing agents, ordinary white cement and epoxy resin, no matter how the name changes, the raw materials are roughly these two.

The anti-corrosion and moisture-proof function of white cement is not as good as epoxy resin, and the speed of mildew in a humid environment is very fast, but it is very cheap.

If you are in a dry northern region, you can use this white cement for beauty seams in the living room and bedroom of your home.

In the humid southern region and the bathroom and kitchen of the family, it is better to choose epoxy resin for sewing, which itself is a good anticorrosive material.

Ordinary white cement may have to be replaced in about a year, but epoxy resin can be kept for five or six years without black mildew, so epoxy resin is still cost-effective.

The most important thing is that ordinary white cement is not oil-proof, and it is too chicken to use in the kitchen. It is more cost-effective to make a beautiful sewing in a humid area, which can make the home more clean and hygienic.

When the cracks in the tiles lose their luster and start to turn black, many people tend to re-stain the cracks in the tiles. At this point, you can use a sewing agent to fill the gap. Use a knife or pencil needle to clean up the dirt in the cracks, then use a hose to hit the cracks, and shovel them off after a long time, so that the gaps are completely clean.

After the sewing agent is laid, it is squeezed with a small hammer to completely squeeze the sewing agent into the ground seam. In this way, a beautiful seam that is not afraid of turning black is completed.

2. Apply wax. Applying candles to the cracks in the floor tiles is a classic practice. Many people know that candles have the effect of waterproof and oil-proof, and they can be applied to the cracks of floor tiles and bricks, which can not only play a dust-proof role, but also cover the blackening of the gaps in the tiles, which is also a more practical material.

3. Apply toothpaste.

In addition to brushing teeth, toothpaste is also a small helper of life, it can also play a certain role in decoration, if the gap between the floor tiles at home has appeared blackened, then you can directly use toothpaste to brush the joints, not only that, the materials at the joints of the floor tiles are mainly white cement and putty, and the oil stains at the joints can also be directly removed with toothpaste. In fact, toothpaste can also play a role in preventing mold and blackening of brick joints, if this situation has appeared in the tile gaps at home, then you can directly use toothpaste to brush the joints, which is also one of the simplest and most practical methods.

4. Vitamin C descaling method.

This method is mainly used in kitchens and bathrooms and other places, because of the high humidity in these places, and there is often residual moisture, so the tiles and their crevices will often appear rust or scale, at this time the use of vitamin C tablets is a good choice. Thank you, I hope I can help you.

Laying tiles is an important step in decoration, and proper joints can not only increase aesthetics when laying tiles, but also save some tiles. Tiles of different colors with suitable color joints are more vivid than direct tiling tiles, and can also avoid mutual extrusion and cracking between tiles during thermal expansion and cold contraction. However, this seam is easy to become black and mildew after a long time, especially the white caulk, so what should I do if the tile gap is black?

Wait a while, brush lightly with a toothbrush, and rinse with water. Finally, you can use a brush to apply waterproofing agent to the crevices to prevent the growth of mold when waterproofing.

2. Stain remover: Soak a small amount of stain remover on a toothbrush, brush it gently to remove dirt from the gaps in the tiles, and then rinse with water. Finally, apply a water repellent as well.

3. Caulder: Cover the surface of the brick joint with a small amount of caulking agent to form a smooth and clean surface, wear-resistant, waterproof, and not easy to stain.

4. Painted candles: The brick joints coated with candles are not easy to hide dirt. Start by gently applying the candle lengthwise to the seams of the tile so that the seams can have candles evenly distributed, and then spread horizontally so that the thickness of the candles in the gap is flat on the surface of the tile.

Under the protection of the wax layer, the brick joints no longer hide dirt.

5. Waterproofing: Improper waterproofing may also lead to moldy brick joints. Therefore, before tiling the tiles, it is necessary to waterproof the water area of the room. It is best to open the doors and windows after cleaning the tiles to allow air circulation and dry the water vapor from the tile walls.

If the tile cracks at home are black and moldy, then you can solve it through the above methods, I hope it can help everyone.

When there is mildew in the tile joints at home, we first need to consider what causes this situation, and the common reasons include: dampness, poor ventilation, blind water in the corners and other places, which affects ventilation, etc. In terms of processing, we can take the following measures:

1.Clean tile joints: Use a toothbrush or brush dipped in white vinegar to gently scrub the tile joints to clean the mold.

2.Disinfection tile joints: You can use professional disinfectants on the market or homemade disinfectant water (water + alcohol + a small amount of white vinegar), pour it in the tile joints, wait for 5 minutes and then rinse it with water.

3.Moisture-proof ventilation: Keep the room dry and ventilated, which can be adjusted by using dehumidifier grinding dust culture, opening windows for ventilation, etc.

4.Tile joint filling: If the situation is more serious, you can consider refilling the tile joints and repainting the cement mortar to block mold from entering the gaps.

In short, we must find out the mildew problem of tile joints at home and take corresponding measures to deal with it in time to keep the room clean and dry, which is conducive to our physical and mental health.

There are many stains in the cracks of the tile, teach you the trick of cleaning, and clean as new in one minute.

What kind of sewing agent is better?

1.Buy products with high volume. The fullness directly affects the beauty of the later stage, and the shrinkage and collapse of the product with high fullness after curing is very small, so as to ensure the aesthetics of the product.

2.It depends on the scrub resistance of the product. The higher the scrub resistance, the longer the service life. A good product has high strength and high hardness after curing, and is strong and durable after the protective layer. The protective layer with low hardness is relatively thin and easy to break after a period of use.

3.Convenient construction. There are some on the market that can be used directly with a beauty sewing agent, and there is also a double mixture. It is recommended that you buy a copy for direct use, which is more convenient, and you have to buy it back and mix it again.

Where can such a product be used in home improvement?

1.Mosaic gaps, floor tile gaps, tile gaps.

Dip the EL1300 with a brush and apply it.

Refresh the caulk so that you can plug the mold directly.

Scrape off, dry and refill. If the tile itself is blackened, there is no way.

It's the caulk, you must have used an inferior caulk, refill it, you can get the original one off with a brush, and then make a sewing agent outside, it's okay, the sewing agent is waterproof, so that there will be no mold problem.

1. Different dirt treatment methods on the bathroom wall tiles are different, for general stains, you can use a soft dry rag to deal with it, and if you encounter stains that must be cleaned with water, it is recommended to use a rag that is wrung out after soaking to no dripping. It is best to open the doors and windows immediately after cleaning to allow air circulation and dry the moisture on the tile wall. In wet weather, you can wipe it again with a dry cloth, and then turn on the air conditioner to dehumidify.

2. In addition to the problem of decoration, there is also the process of use, it is easy to get soap dirt, shampoo, etc., for the dirt on the wall, you can first rinse it with warm water to dissolve the soap stain, and then use a brush to gently wipe it off. Alternatively, you can use a solution of sulfuric acid or hydrochloric acid, drop it on the surface of the brick, let it stand for a few minutes and wipe it.

3. The tile wall behind the faucet and water pipe in the bathroom is prone to a layer of rust, which affects the appearance. It can be washed with 2% oxalic acid solution and then wiped with water. In addition, you can also use 3-4 vitamin C tablets to grind into powder, sprinkle on the surface of the tile, and then scrub with water several times to remove rust stains.

In addition, sometimes the bathroom is also prone to accidentally get paint, oil, etc., at this time, we can use alkaline detergents or organic solvents to clean.