What to do if the leaky wall is moldy, and how to deal with the water seepage and mold on the wall?

There are several reasons for wall leaks.

The first reason: the problem of water pipes - the water pipes are aged and rusted due to perennial use; Or the installation is not in place, and the place that should be tightened is not.

tightening; Poor quality water pipes can affect the wall, if this situation occurs, it will be repaired, of course, if.

It is also a good idea to replace all the pipes if possible;

The second reason: the height of the waterproof layer in the shower room is not up to standard - the wall is damp and moldy in a humid environment for a long time.

It is better to re-waterproof the wall to prevent future troubles;

The third reason; The construction hole left when building a house - when it rains, there will be a phenomenon of resurgence of moisture in the interior wall, and it is not recommended to do it yourself in this situation, and you should find the corresponding property company to help solve it.

Solution. The repair of the inside and outside of the wall at the same time solves the leakage of the wall, and then the phenomenon of mold and hair growth on the wall. If the wall seeps water, the cracks in the wall and the bricks in the outer wall are repaired with special putty, and then painted with high-elasticity waterproof coating, which can expand and contract with the thermal expansion and contraction of the wall without cracks; If the insulation value of the wall is insufficient, the increase of the insulation layer prevents the occurrence of the cold bridge phenomenon; Spray special mildew removal spraying solution or 84 disinfectant to kill mold in the indoor mildew and paint special latex paint to prevent the contact between cellulose and mold in Dabai, so that the wall will no longer appear moldy and hairy.

1.Exterior wall maintenance: During construction, the outdoor temperature is above 8, the wall temperature is above 5, the moisture content of the wall is below 10%, and there is no rainy weather within 12 hours.

Relative to the leakage part of the inner wall, the outer wall extends at least one meter to the surrounding area, and the cold wall should be extended to the range of 1 meter each of the two adjacent warm walls, and the construction area is twice the construction area of the inner wall, so as to ensure the construction quality. Specific construction steps: (1) Cement wall:

Cleaning the base layer, filling local gaps, brushing primer, painting special waterproof paint twice, painting paint close to the color of the wall; (2) Exterior wall brick wall base cleaning, wipe clean, special putty caulking, paint twice special transparent waterproof coating; (3) The insulation value of the wall is insufficient, paste a 2cm insulation board indoors for the cold-permeable wall, scrape the special anti-mildew putty, and paint the special anti-mildew latex paint.

2.Interior wall maintenance: First of all, it should be emphasized that interior wall maintenance has a good effect on the basis of solving problems such as water seepage on the exterior wall and condensation on the interior wall.

Due to the edge of the moldy and hairy part of the wall, although no moldy hairs were found, there was actually mold, and the moldy and hairy wall was repaired to expand to the surrounding area to ensure that the mold was completely **. Its specific construction steps: (1) the base is cleaned up, and the attachments are wiped off; (2) Spray a special spraying solution for strong mold removal to kill the surface mold; (3) Paint a special anti-mildew latex paint; Hint:

To solve the mold phenomenon of the interior wall, it is necessary to start from the outside to prevent the problem of dampness of the wall caused by water seepage on the exterior wall, otherwise, there will still be mildew spots after repainting the wall.

What should I do if my walls are moldy?

What should I do if my walls are moldy?

The causes of water seepage and mildew in the walls are:

1. There is no insulation layer on the wall: in the past, the wall of many houses did not have an insulation layer, in winter, the temperature difference between the surface and the inside of the room was large, so the wall was cold outside and hot inside, and the inner wall surface would produce condensation because of the high temperature, resulting in the wall being wet, and it was the whole wall, such a situation was usually only presented in winter, and it would be good in summer, but the sequelae was that it would leave a lot of ugly mildew, which would affect the beauty of the wall.

2. Leakage of water pipes in the wall: The leakage of the embedded water pipes in the wall caused by the lack of good connection of water pipes, the use of inferior water pipes, and the lack of pressure test of water pipes is easy to cause water seepage in the wall, which mostly occurs near the bathroom, the roof of the house or the wall.

3. Waterproof measures are not done: the wall waterproofing of the neighbor's bathroom next door is not done, the ground waterproofing of the upstairs neighbor's bathroom is not done, the waterproofing of the combination of the upstairs water pipe and the ground is not done, and the waterproofing of the roof or wall and ground is not done, etc., which may lead to the occurrence of leakage.

4. There are cracks or holes in the structure of the house: there are cracks in the structure of the house, there are gaps between the windows and the structure, and the air-conditioning holes are not tightly sealed, and the rainwater will seep into the wall along the cracks under the action of the wind, and the water vapor contained in the wall for a long time cannot evaporate in time, and the wall will become moldy.

Solve the root cause of water seepage first, and the rest will be easy to deal with, otherwise, if you deal with the moldy place, if the water leakage is not solved, it will become moldy again. Once the water seepage problem is solved, it is time to remove the mold with a special wall mold remover and spray it on the area where the mold grows. For newly grown mold, spray Meiboss wall mold remover directly.

For mold spores with a hard surface that clearly protrudes from the wall, you can wipe or scrape off and then spray the wall mold remover. Do not wipe off mold with a rag to avoid contaminating the wall. MEIBOSS Wall Mold Remover can be used directly and does not need to be diluted.

At this time, what should be done is to ask the corresponding decoration personnel to make changes, and be sure to understand which part of the problem is, and repair it in time in advance.

1. If there is less mold, you can use a dry toothbrush to brush off the mold, and then wipe it with a cloth dipped in alcohol;

2. If there are many moldy parts, you can pour bleach into the watering can, then add water to dilute, then spray on the moldy place, then wipe with a rag, wash with water, and finally brush with anti-mildew paint;

3. If the mold is very serious, you can only ask a professional to deal with the mold and then repaint the wall;

If the mold is not very serious, you can first use a dry toothbrush to brush off the mold on the wall, and then use a soft cloth dipped in alcohol to gently wipe it again, if there are more moldy parts, you can pour bleach into the watering can, then add water to dilute, and then spray on the moldy place, and then wipe the wall with a rag, and then wash it with water, and brush the anti-mildew paint after the wall is dry.

The cause of the dampness should be found and then changed, and then the wall can also be dried to remove the moldy parts and apply the paint again.

At this time, it is necessary to shovel off the wall skin at home, and then ventilate the home to dry the wall, then brush with waterproof paint, and then scrape putty and spray latex paint after drying.

If there is such a situation at home, you should go to a professional in time and let a professional person come to help you repair it.

1. Remove the moldy wall first, and then brush a layer of 108 glue. With nano waterproofing agent, when the wall has more moisture, it will have black spots and mildew, if you brush latex paint, and then scrape putty, the problem can not be solved. The wall paint should be shoveled off until it reaches the bottom of the ash, and the indoor moisture should not be allowed to enter, and many walls will have black spots and mold.

2. The water outside entered the wall again. When it rains, the rainwater enters the wall outside, but it can't be discharged, and then there is a rainy day, and then spray the nano waterproofing agent twice (not very expensive), the sun is hot and the temperature is high in summer, because the moisture outside and inside is in the wall. Solution:

crystal effect) to keep the moisture in the exterior wall from entering. Then repaint it with the same oil you like. In this way, at least ten or eight years, I am not afraid of black and moldy.

3. The walls in the house are often damp and moldy, and the heat sucks the water vapor into the wall. If the wall insulation is not done well, it will lead to cold penetration, and the phenomenon of cold penetration is mold, blackening, and hair growth on the indoor wall. The reason is that the indoor air is warm, the water vapor saturation is high, and the wall is not well insulated, so the wall is cold, and the water vapor will crystallize into water droplets on the wall, and the wall will become moldy and hairy when it is wet.

To avoid the hair of the wall, the main thing is to do a good job of wall insulation.

Water leakage in residential areas is a common problem, especially in humid climates, which can easily lead to mold on the walls. This not only endangers human health, but also damages the building structure and affects the quality of life. Here are some ways to deal with mold on your walls:

1.Find out the cause of the water leak: First of all, find the cause of the leakage and determine the location of the water leakage. If the leak is coming from a roof or pipe, the leak should be repaired as soon as possible to prevent the wall from getting damp again.

2.Mold removal: Mold removal requires the use of a professional remover. Choose a spray-on mold remover cleaner for spraying and wait for some time while the room is ventilated. After that, use a brush or paper to wipe off the dirt.

3.Anti-mildew treatment: Anti-mildew treatment is an important part of wall treatment, which can add antimycin to the paint to kill wall mold.

When using antimycin paints, it is necessary to ensure that the wall surface is completely dry, so that the paint on the wall can adhere firmly and exert the maximum effect.

4.Waterproofing: The best way to protect against mold on the wall is to apply waterproofing. If you are not waterproofing your home when you are renovating, it is recommended that you take a professional approach to waterproofing. For old waterproofing layers, it is advisable to refurbish or re-cover them.

5.Keep it dry: Keep the room dry and have a good air circulation system to mitigate the effects of a humid environment. By keeping the room dry with dehumidifiers, ventilators, etc., the risk of mold is reduced by reducing the chance of the wall being exposed to moisture.

The above are several ways to deal with mold on the leaky wall of the community, and you can choose according to the actual situation. Whether it's cleaning the walls or waterproofing, you need to be guided by a professional. At the same time, regularly inspect the waterproofing, ventilation, drainage and other facilities of the house, and invest in some equipment will be of great help to the health and comfort of the house.

1. If the water pipe is leaking, you need to replace the water pipe and then repair the wall. 2. If the wall is cracked, the crack can be repaired by using tools such as plugging king and then decorating. 3. If the waterproofing is not done, the wall needs to be removed, and the wall should be decorated after waterproofing and inspection.

4. If it is due to weather conditions, you need to shovel off the wall skin first, then paint the impermeable liquid, and then apply a layer of latex paint with good waterproofness. The reasons for this situation: 1. If the wall is moldy, it may be because the rainwater seeps into the home, and it is in the rainy season or continuous rain, then the cracks in the wall will have rainwater infiltrating into the room, which will lead to dampness around the window, and there will be various mildew stains, which seriously affects the aesthetics and practicability.

2. There will be many materials used in decoration, and the materials contain nutrients, and there will be cellulose when the wall is scraped white, which is sugary, and there may be mold breeding under the appropriate temperature and humidity. If you use a poor quality one, the wall will definitely not appear moldy. 3. There may be moisture in the wall that is sealed, it may be that the wall stucco has not dried and the decoration has begun, and the moisture is sealed in the wall, which will make the wall mildew or even hairy, which will have a great impact on the wall.

4. It may be that the waterproof layer has been destroyed, and there is a leakage problem on the top layer, then the roof of the shed will be moldy and hairy, and if the waterproof layer is destroyed during decoration, it will begin to leak, and even the bottom layer will have moldy problems.