How to see if the quality of the wardrobe is good? Is the wardrobe good for the wardrobe

1. Material selection: At present, the commonly used materials for customized wardrobes on the market are solid wood particle board and multi-layer solid wood board, which is relatively affordable and has very good moisture-proof performance; Although the multi-layer solid wood board is high, it has good structural stability and waterproofness, and at the same time, it solves the defects of solid wood board deformation from the aspect of internal stress after vertical and horizontal gluing, high temperature and high pressure;

2. Health and environmental protection: check whether the plate meets the E1 standard, and smell whether the plate has a strong odor;

Third, the effect of edge banding: at present, there are machine edge banding and manual edge banding, the machine edge banding effect is neat and smooth, and the manual edge banding is rough and easy to fall off;

Fourth, the effect of drilling: drilling is also divided into machine automatic drilling and manual drilling, automatic drilling positioning is accurate, and manual drilling will have a certain data error, which is easy to cause distortion and deformation of the cabinet;

5. Stability of the structure: After a good wardrobe is assembled, there is no gap at the joint, and the structure is stable and shaking.

1. Plate: Preferably E0 grade healthy plate.

The quality of the board determines the quality of the wardrobe. If the customized wardrobe is durable and does not release formaldehyde, it is necessary to use boards from large manufacturers and high environmental protection levels. At present, the European standard E0 plate is the healthiest plate.

E0 grade plate can effectively prevent the occurrence of excessive formaldehyde release, and the environmental protection level is very high. Only large manufacturers will use E1 and E0 plates. E0 grade board, formaldehyde emission, environmental protection index is the same as fresh wood, is the most environmentally friendly board on the market.

Moisture-proof and other properties are also very good.

2. Edge banding: The edge banding of large edge banding machine is reliable.

A good wardrobe with tight, firm and beautiful edges. It can also prevent formaldehyde volatilization. The edge sealing of the small factory is rough, not tight, and even the glue seeps out, which is very unsightly and unhygienic.

To be good in edge banding, a large edge banding machine must be used, which is impossible for small factories to use, generally manual edge banding, or small machines. The large-scale edge banding machine makes the edge banding tight, smooth and beautiful. The hand-sealed edge of the small factory will have black lines and zigzag marks, which are relatively rough, will hurt the clothes, and may also be scratched.

3. Hardware: It is best to use hardware of well-known brands.

The wardrobe door often makes a loud noise, the track of the sliding door is often stuck, and even the hinges and screws will fall off, probably because the quality of the hardware is not good.

A good overall wardrobe, the hardware used are all big brands or private brands, so that the wardrobe has a longer service life and better use effect. The hardware used in small wardrobe factories and workshops is not only of poor quality, often broken, and even deformed and fell apart, which is a potential safety hazard.

Fourth, technology: advanced technology, imported equipment.

With good materials, we also need good equipment and processes to produce them. The small wardrobe chief and carpentry are not much of a craft, and the equipment is also very cheap. Only large-scale wardrobe enterprises will use advanced technology and imported equipment.

Cost-effective custom wardrobe, you can go to Yadan custom wardrobe to see.

Summary. Kiss! Wardrobe is not good for wardrobe.

Kiss! Wardrobe is not good for wardrobe.

Kiss! In fact, you can choose some corners when you put them in the wardrobe, which has many benefits. The wardrobe should be placed in the dark corner of the wall as much as possible, not next to the window or bedroom door.

This will prevent the wardrobe from blocking the light and making the bedroom darker. If the bedroom is well lit and ventilated, the wardrobe is not too particular about the number of tones, but it is best not to choose a wardrobe with too much reflective metal and glass inlaid on the surface, otherwise it will not only cause trouble to the owner, but also easily make the feng shui of the bedroom become bad.

As soon as the raider enters the door, it is directly facing the cabinet rollers, giving people a sense of oppression, as if it is in a train car, and the space becomes narrow, and the air flow is not enough. From the perspective of feng shui, the fortune of the clap burning letter cannot come in, and the feng shui turns even if the wealth comes in, the space that is too squeezed The God of Wealth was out of breath and had to withdraw. That's why there is a folk saying.

A wardrobe is not good to look at the plate, so we must pay more attention to the workmanship materials of the board, as well as the production process. For example, Jihong ecological board selects 5-7-year-old eucalyptus trees as raw materials, and after automatic splicing and pressing, automatic splicing and pressing, ultra-high temperature and high pressure pressing and other processes, the produced plates are durable, not easy to deform, easy to process, and are especially suitable for making wardrobes.

First of all, we need to look at the plate, because it is related to environmental protection and quality and safety. The second is to look at the design and process on which the service life of the wardrobe depends.

You can judge by observation, you can see whether the workmanship of the wardrobe is good, and whether the materials used in it are good.

First of all, we must identify the smell of the wardrobe, if the smell is large, it means that the materials it is made of are of inferior quality, and there may be a large amount of formaldehyde, and secondly, you can knock on the wooden board of the wardrobe, listen to the sound to identify whether it is solid, if it is hollow, there may be a phenomenon of cutting corners, the quality of the wardrobe is not good.

First of all, it is necessary to see whether the wood is heavy, comfortable and textured, secondly, whether the gap between the panels is delicate and balanced, and finally whether the overall structure is reasonable and scientific.

Then you should look at what the planks that make up this wardrobe look like and judge its quality.

If you want to identify whether the quality of this wardrobe is good or bad, you must first look at whether there will be other noises when opening and closing the door, and also look at the quality of the clothes rod.

The board of the wardrobe is very important, which affects the feeling of use and the quality of the wardrobe. However, how to judge the quality of the wardrobe plate? PCHOUSE will explain it to you. 1. Look at the material of the plate.

You can see the material of the plate from the section, which is generally tightly combined by fine fibers, with more glue content, high density, and low environmental protection coefficient for MDF.

2. Look at the substrate of the plate.

The free formaldehyde content in the board is 9mg 100g is the E1 level environmental protection standard, which is not easy to cause harm to the human body.

3. Look at the veneer.

You can use your fingernails to gently scratch the veneer to see if there are any visible scratches. Scratches appear, the quality of the plate is relatively poor; Good wardrobe panels are generally impregnated with paint, thick thickness and high temperature and high pressure treatment, high surface strength, wear resistance and scratch resistance.

4. Look at the edge banding of the plate.

A good wardrobe board has no chipping around it, which can effectively prevent moisture in the air from soaking into the board.

5. Look at the thickness of the plate.

Generally, the standard thickness of the plate is 18 mm, but some manufacturers use the thickness of the plate is 16 mm, but it is said to be 18 mm to consumers, so we should pay attention to it.

Nowadays, custom furniture is becoming more and more common, and custom wardrobes have also entered thousands of households, which is different from ordinary wardrobes, and can be customized according to people's preferences to different styles, colors, styles, and material wardrobes, so they are well received by people. So how can you tell if a custom wardrobe is good or bad? Next, I will introduce you to the method of judging the quality of a custom wardrobe, come and find out!

First, look for environmentally friendly boards.

Professional custom wardrobe manufacturers choose environmentally friendly plates that meet national testing standards, while some manufacturers choose some inferior plates that have no test report and pose a potential threat to human health. Therefore, when buying a custom wardrobe, the first thing you should see is whether the merchant has a plate test report and relevant test certificate from the national authoritative testing department.

Second, the quality of plate veneer is seen.

Some wardrobes look good on the surface, however, a slight stroke with a fingernail can make a visible scratch. These custom wardrobes are made of polyflor paper and gorgeous cardboard that are often used in low-cost wardrobes on the market, and the wear resistance is poor. Professional custom wardrobe manufacturers generally use environmentally friendly melamine veneers with thick dip paint thickness and high temperature and high pressure treatment, with high surface strength, wear resistance and scratch resistance.

Third, the edge of the plate is seen as workmanship.

Professional custom wardrobe manufacturers use precision panel saws to cut the plates, and there is no collapse around the plates. After the edge is banded around the edge, it effectively prevents moisture in the air from invading the inside of the panel. Some manufacturers do not have professional equipment, the cutting is rough, and there are obvious edge collapse around it.

Some even cut corners and only did edge banding on the front side of the plate. The non-edged surface is easy to absorb moisture in the air, causing the board to expand, causing the wardrobe to deform and affecting the service life.

Fourth, look at the sample section.

Generally look at the section of the model, from the section point of view, blockboard is the upper and lower two or four layers of veneer (there are also thickened veneer with more than four layers) close to the solid wood core, the core of the blockboard is smooth, there is no gap; MDF is made of fine fibers, which are tightly bonded and weigh more; Particleboard is a wood granular structure, but it is not tightly combined, the weight is light, and even small pores can be seen in poor quality; Multilayer boards are made up of multiple veneers glued together, generally with three or five layers.

The above is how to judge the quality of a custom wardrobe shared for you, I hope it will help you.

In the process of home decoration wardrobe, the quality of the wardrobe should depend on what the material of the decoration wardrobe is. Personally, I still prefer solid wood wardrobes and do handmade customization.

If you want to distinguish the wardrobe *** is not good, you must see what material he uses, generally the quality of the real solid wood wardrobe is very good, it is best to choose pine or mahogany furniture.

The wardrobe is made of solid wood, and the wood is pine or mahogany, so that the furniture is not only high-end but also durable.