How to set up the mobile phone to project the screen to the wall, how to get the mobile phone to the

You need to buy a device for screen casting.

You need to install a projector.

Device: Apple 8. System:.

Software: mobile phone screen projection.

1. Turn on your Huawei phone.

Let the hand shout portable and projector.

Connected under the same wifi as shown in the figure below:

2. After connecting to the same wifi, find the phone settings and click on it, as shown in the figure below

3. After entering the mobile phone settings, click on the device connection, as shown in the figure below

4. On the device connection interface, click Wireless Screen Projection, as shown in the figure below

5. After clicking on wireless projection, let the mobile phone connect to the projector, and you can project the screen to the wall, as shown in the figure below

Instead of projecting the phone screen on the wall with a projector, you can use the convex lens imaging principle to achieve it, try the following operation steps::

Mobile: Honor 60.

2. Adjust the brightness to the maximum in the phone settings.

3. Turn the image of the phone upside down and fix the phone to a certain position (opposite is a white wall). At this time, place the convex lens in front of the phone. Turn off the lights in the house.

If it is daytime, the windows should be blocked to avoid the light affecting the effect. Move back and forth to the distance between the convex lens and the phone screen until the image on the wall is clear.

Summary. Dear, I'm glad to answer for you: How to project the screen to the wall without a projector mobile phone?

Answer: 1. First of all, you must prepare a large-screen mobile phone of more than 4 inches (most mobile phones are 5-inch now), a shoebox (at least two, one large and one small), and a high-transparency magnifying glass, a used scotch tape paper ring, and finally scotch tape. 2. To dig a hole in front of the big shoebox, compare it with a magnifying glass and a transparent tape paper ring before digging the hole.

Make a mark with a pen and then punch a hole with a sharp knife to cut off the magnifying glass with a knife. 3. The next step is to make a strip for adjusting the focal length after the lens hole is ready. Dig a gap in the back of the shoebox at the height and width of the cover, preferably with a small shoebox that can be used as a pull-slide track.

In order to fix the phone, a mobile phone holder is also made inside. The method of the bracket is also very simple, first use another shoebox to clip on the previous shoe cover, then cut off the other half of the shoebox, and glue a base with transparent adhesive strips. 4. Then the following is the lens for installing the projector, to install a paper ring of used scotch tape in the shoebox, and then glue it with adhesive strips, and then glue the magnifying glass to the front, so that the lens is ready.

5. Put your phone on the base after messing around, and then cover the shoe. Then pay attention to the focus when projecting, and when focusing, you can pull out the cardboard embedded in it, because the screen brightness of the mobile phone is different, it is best to adjust the brightness of your mobile phone screen to the brightest, so that the projection effect will be the best.

Good. Dear, I'm glad to answer for you: How to project the screen to the wall without a projector mobile phone?

Answer: 1. First of all, you must prepare a large-screen mobile phone of more than 4 inches (most mobile phones are 5-inch now), a shoebox (at least two, one large and one small), and a high-transparency magnifying glass, a used scotch tape paper ring, and finally scotch tape. 2. To dig a hole in front of the big shoebox, compare it with a magnifying glass and a transparent tape paper ring before digging the hole.

Make a mark with a pen and then punch a hole with a sharp knife to cut off the magnifying glass with a knife. 3. The next step is to make a strip for adjusting the focal length after the lens hole is ready. Dig a gap in the back of the shoebox at the height and width of the cover, preferably with a small shoebox that can be used as a pull-slide track.

In order to fix the phone, a mobile phone holder is also made inside. The method of the bracket is also very simple, first use another shoebox to clip on the previous shoe cover, then cut off the other half of the shoebox, and glue a base with transparent adhesive strips. 4. Then the following is the lens for installing the projector, to install a paper ring of used scotch tape in the shoebox, and then glue it with adhesive strips, and then glue the magnifying glass to the front, so that the lens is ready.

5. Put your phone on the base after messing around, and then cover the shoe. Then pay attention to the focus when projecting, and when focusing, you can pull out the cardboard embedded in it, because the screen brightness of the mobile phone is different, it is best to adjust the brightness of your mobile phone screen to the brightest, so that the projection effect will be the best.

<> vivo phone can be projected to the wall. Method:

1. Place the vivo phone and projector.

Connect to the same network.

2. Turn on the projector and vivo's screen projection function.

3. Connect the device that needs to be projected in your phone.

vivo is the best mobile communication of vivo.

Its mobile phone brand officially entered the mobile phone market in 2011, and it has three product lines: X series, X Play series and Y series. vivo is committed to working with fun-loving, energetic, young and fashionable groups to create smart products with excellent appearance, professional-grade sound quality, ultimate image, and pleasant experience. In addition to the mainland market of the Chinese mainland, vivo has also entered overseas markets such as India, Thailand, and Myanmar.

In 2013, vivo created a new Hi-Fi extreme audio-visual product series XPLAY series, and in May, it released the first mobile phone vivoXPLAY in Zaodong, which was equipped with vivo's self-developed sound quality architecture for the first time. In July 2013, vivo's first flagship experience store in China was officially opened on Yan'an Road in Hangzhou, marking the opening of a new mode of user communication and interaction.

Projection album to make TV and other Dazhou Hengping screen equipment: When using the projection screen, you need to connect the mobile phone and the large-screen device to the same WLAN, and then enter the mobile phone settings - other network sources and connections - projection, in the list of available devices, select the device that needs to be projected, and you can cast the screen.

Summary. You can use the following methods to cast your phone to the wall:1

Use a smart projector: Many smart projectors support wireless screen casting, and you can connect your phone to the projector and cast an image to the wall. 2.

Use an HDMI cable: If your phone supports HDMI output, you can use an HDMI cable to connect your phone to a TV or projector and project the picture to the wall. 3.

Use wireless mirroring: Many TVs support wireless mirroring, which allows you to connect your phone to your TV and cast the picture to the wall. 4.

Use a phone screen caster: There are also phone screen casters that allow you to project your phone screen onto the wall. You can choose popular screen casters like Chromecast, Miracast, or AirPlay.

It's important to note that no matter which method you use, you'll need to make sure that the distance between your phone and the wall is far enough away for the picture to be clearly visible. And avoid light interference and background clutter when projecting the screen.

You can use the following methods to cast your phone to the wall:1Use a smart projector:

Many smart projectors support wireless screen mirroring, you can connect your phone to the projector and project the image to the wall. 2.Use an HDMI cable:

If your phone supports HDMI output, you can use an HDMI cable to connect your phone to a TV or projector, and then project the vertical picture to the wall. 3.Use wireless screen mirroring:

Many TVs support wireless screen mirroring, you can connect your phone to the TV and project the picture to the wall. 4.Use your phone's screen projector:

There are also phone projectors that allow you to project your phone screen to the wall. You can choose from popular screen casters like Chromecast, Miracast, or AirPlay. It's important to note that no matter which method you use, you'll need to make sure that the distance between your phone and the wall is far enough away to make sure it's clearly visible.

And avoid light interference and background clutter when projecting the screen.

You've done a great job! Can you elaborate on that?

There are a few ways to cast your phone to the wall:1Use the fingerline projector:

Buy a wireless screen projector, connect it to a TV or projection analogue dust meter, and then connect your phone with the screen projector to perform screen projection operations. 2.Using a wired screen caster:

Connect a wired screen projector, similar to an HDMI cable, connect your Danzen phone with the screen projector, and then connect the screen projector to a TV or projector. 3.Use a smart projector:

You can accompany the projector through your mobile phone.

Take the iPhone6S mobile phone as an example:

1. First of all, make sure the projector and mobile phone are connected to the same wifi.

2. Turn on your iPhone.

3. At this time, the phone jumps to another page to make the stupid side "iPhone" and "Projector".

4、Then select the projector,Nalu checked the phone and found that there was an option under the "mirror" also turned on。

5. Then the phone screen will appear on the wall screen, and all the actions on the phone will appear on the TV screen.