It s been almost a month since the filler has been uneven on the face, please let the filler again

How to deal with bumpiness after liposuction on the face?

1. If there is unevenness in the early stage of facial liposuction, you can wait for it to recover on its own. In the early recovery process, there is no need to worry, the unevenness 15-45 days after liposuction is only temporary, and the normal phenomenon after facial liposuction, after 45 days, will gradually ease without signs of unevenness.

2. Massage the face correctly under the guidance of the doctor after surgery. After facial liposuction, if there is any unevenness, it can be relieved by massage 1 month after surgery, and reasonable massage can make the subcutaneous fat reasonably distributed, and gradually restore elasticity. However, it is important to note that the patient should perform a proper massage under the guidance of a doctor to avoid ***.

How to fix bumps on the face after liposuction?

1. Liposuction or fiber lipolysis on the protruding parts. If there is still a lump after 45 days of facial liposuction, it should be repaired as soon as possible, because the doctor does not perform properly and the postoperative care is not accurate. After reviewing the original information of facial liposuction, the doctor can use liposuction or fibrolysis to repair the irregularity.

Compared with conventional liposuction, fiber light guide lipolysis is less invasive and has a two-stage lipolytic function, which can avoid lumps and lumps**. Therefore, fiber plus fat is a form of repair that many doctors may choose from, in addition to liposuction.

2. The depression can be improved by autologous fat filling. If there is an unevenness 45 days after liposuction, autologous fat can be filled according to the sunken position. Autologous fat filling needs to provide a high technical and surgical environment for the doctor, so it is necessary to choose a formal medical and cosmetic organization to perform the procedure.

3. Remove and tighten the slack. If facial liposuction is performed on older people, there will still be lumps and lumps after 45 days. In order to completely address the pimples and pimples after facial liposuction, the doctor may choose to remove the sagging ** and tighten** the patient for repair.

This is to reduce the ** of those who seek beauty. Flattening. Young recipients** do not have relaxation and do not need to undergo this**.

But there is a small suggestion that everyone should be guaranteed when choosing a hospital, and not choose blindly.

Don't be in a hurry after the failure of unevenness after fat filling, this situation can be improved by repair, and you must be cautious about the choice of repair, not blind choice.

Generally, unevenness is caused by more hitting in some places and less in some places during operation. At this time, the excess fat can be extracted, so that ** can be repaired and flattened first, and then the fat can be properly supplemented according to the situation. However, if the concave part is filled with fat during the repair, the convex part is not treated, that is, only added, not subtracted, and the slight unevenness will be improved to a certain extent, but the serious unevenness should not be obvious, and the more it is filled, the more it will become more and more bloated.

For the case of fat filling failure, Victoria's Secret 6 degree repair technology can be used for repair, this technology can accurately remove and ablate the overfilled fat, the whole repair process is gentle, the unique dissolution wave technology is used to ablat excess fat, the whole repair probe is only, the pinhole is hidden, no trace can be seen, low temperature protection, does not damage non-fat tissue, protects blood vessels and nerves, the whole process has less bleeding, light swelling, short recovery period, does not affect normal work and life, can be done as you go.

1. Go to the doctor who operated on you and fill you again, 2. Go to the doctor and ask if the surgery you did is reversible. If it is reversible, do it backwards back to the way it was.

Hello, after autologous fat filling, the face is uneven This is because the extracted fat cells are too large, which will cause induration, and the most important thing is that the doctor's injection technique is not in place, and it is uneven when filling the fat, resulting in unevenness.

If the doctor suctions in the wrong position, destroys the subcutaneous tissues and blood vessels, or sucks too much fat at one time, there will be unevenness and need to be repaired by a professional doctor.

Autologous fat facial fillers are the most widely used facial fillers, and they are also popular because of their high safety. Autologous fat facial filler is to extract some fat from areas with a lot of fat accumulation, such as the abdomen and inner thighs, and then separate the fat from the center of the circle with a centrifuge to extract the pure fat, and then inject it into the area required for facial filling. The anesthesia is based on ** sleep anesthesia, so the whole autologous fat facial filler procedure is painless.

This will not be the case when autologous fat facial fillers are performed by professional doctors in regular hospitals.

However, if you have bumpiness after autologous fat facial filling, there are two possible reasons:

1. Asymmetry on both sides of fat injection. If the fat injection is carried out bilaterally at the same time, it is often impossible to achieve complete consistency, and there can be asymmetry, due to the local need for swelling anesthesia, bilateral asymmetry is not easy to detect immediately after fat injection, and with the gradual swelling of the injection site, coupled with the fat absorption is not exactly the same, the appearance can be uneven.

2. If the fat injection is uneven, and the above two conditions occur, autologous fat grafting repair can be performed again 3 months after surgery.

Post-operative care.

1. For liposuction, postoperative care is also very important.

2. Shape. The constant pressure of the shapewear has a sculpting effect on the adipose tissue, which helps the skin quickly return to a smooth, firm state after liposuction.

3. Fixed. Shapewear can hold the fat layer in the right place.

4. Oppression. Wearing shapewear can help reduce bleeding, prevent bruising and swelling, and speed up recovery time after surgery. Many beauty seekers ignore the role of wearing shapewear after surgery, and the effect may be greatly reduced after liposuction, which may cause **unevenness.

Due to the problem of fat filling, some doctors are afraid that the absorption will be too fast after surgery, so they simply fill in more at one time, resulting in excessive fat filling phenomena such as "brain gate" and "plastic surgery monster".

There are the following methods for the treatment of fat filling overdose:

1. If you are still in the recovery period, under the judgment of the doctor, the filling exceeds expectations, you can consider using steaming, hot compresses, and massage to reduce the survival of fat;

2. If the treatment for excessive fat filling is liposuction after the stabilization is fixed, but if the fat is filled in the parts that should not be filled, such as nerves, blood vessels, expression muscles, etc., it is very difficult to take it out. Lipos are applied to the face and can improve the problem of facial depression.

Beijing-Aidongbang Skin Light Welding (Laser Lipolysis) removes excess and dead fat from the body. When repaired, it can be tightly adhered to, so that the filler has elasticity and does not cause wrinkles.

Facial fat filling can appear uneven because the fat particles are not so uniform at first.

After forehead augmentation, there is a possibility that the skin will be uneven.

This is because fat filling is the use of its own adipose tissue injection into the forehead, and after the injection, the human body is not completely digested and absorbed, so it is inevitable that there will be unevenness.

If you want to do autologous fat filling, you should also go to a regular and experienced medical institution to perform it according to your physical condition.

It mainly depends on the doctor's technique and postoperative care, it is recommended to find a doctor with high medical skills to do it, the optical fiber of Beijing-Aidobang-Cortical Limb Spine Welding (Laser Lipolysis) emits gradient pulsed light, which moves in a fan shape, and accurately transmits heat energy to the fat accumulation site to dissolve fat and tighten the skin at the same time. Cortical light welding is a new laser ** system, which uses 1064 wavelengths to achieve more precise lipolysis tightening, which is the perfect combination of surgery and laser.

There may be differences in bumps. The reason is related to many factors such as the thickness of the soft tissue at the fat filling site, the depth of the fat filling layer, the uniformity of fat distribution, the size of fat particles, the degree of absorption or calcification of fat in the post-yard period, the degree of late branch collapse, the fineness of the operation process, and whether the person is really suitable for fat filling. In the final analysis, these are closely related to the doctor's clinical experience and operating skills.

A good aesthetic doctor will minimize these possible risks and fully guarantee the results.

What to do if you get bumpy after face filling? Autologous fat cheek augmentation is a more commonly used filler, this method of cheek augmentation pays great attention to the recovery of the face, representing the development trend of facial rejuvenation in the future field. Autologous fat cheek augmentation increases the volume of the face, increases the fullness of the face, and brings about a change in the ** mode, which will make the face more youthful and natural.

If there is unevenness after filling, it may be related to the lack of tissue fusion in the early stage, and it is generally related to swelling, so it is recommended to wait until the swelling has significantly reduced before looking at the appearance.

The unevenness after facial filling is caused by improper operation, so it is recommended to choose the appropriate material according to different parts to avoid overfilling.

If the fat filling is uneven, if it is really within 2 months after surgery, it is recommended to adjust it by massage and other methods, do not toss by yourself, and be sure to consult a doctor in time; If the fat has been finally formed and completely recovered, it means that the filler surgery has failed, and you need to contact the doctor for a second filler adjustment. Lipofiller is a great test of the skills and experience of cosmetic procedures, so be sure to find a regular hospital and an experienced doctor to perform the filler operation before filling.

If plastic surgery is risky, you can go to the previous hospital for a check-up and let them remedy it according to the actual situation.

Generally, liposuction failure is reflected in postoperative unevenness, and the main reasons are:

1. The distribution of fat itself is uneven, which many people have, and the fat itself is uneven, but they are not aware of it, so they must be measured and observed in detail during the consultation;

2. The amount of liposuction, the larger the amount of liposuction, the greater the probability of postoperative failure;

3. Doctor's technique generally requires the doctor to evenly suck out the fat in the deep layer of the fat, control the amount of bleeding, do not destroy the remaining fat layer, and the recovery time is short;

4. Post-operative care, this post-operative care is very important, don't think that you will wait for the effect after the operation, the recovery period is very important, you must follow the doctor's instructions, don't let you eat, don't let you do it.

How to fix the unevenness of autologous fat filling?

1.The design concept has changed from one-dimensional design to three-dimensional dynamic design, and three scribing designs are carried out in the same part for precise positioning.

2.During the whole surgical process, the surgical site is moved in a functional position, internal rotation, abduction, etc., to achieve dynamic and static two-dimensional liposuction.

3.We do articulation, sculptural liposuction. For the liposuction part of the joint part of the natural over, for the sunken part of the fat grafting filling, restore the normal shape and function of the flat, beautiful.

The unevenness of autologous fat filling is caused by poor liposuction technology, mainly due to the uneven size of fat particles, small fat injection into the face will form a depression, and large fat absorption will form a bulge. Autologous fat filling is a method with little trauma, low risk and short recovery period, autologous fat comes from autologous, has good compatibility with the human body, no rejection, etc., and is highly safe.

You should go to a professional doctor for fat removal, and the repair effect is still good.

It is not normal to have a bumpy forehead after fat filling, but the forehead will not be uneven after fat filling, because fat filling is a relatively safe procedure and has little refreshment. And it doesn't leave a scar. Generally, there will be an effect immediately after doing it, so it is not normal to have a bumpy forehead after fat filling, but now that technology is developed, it can be repaired if the forehead is uneven after fat filling.

The most common manifestation of liposuction failure is postoperative unevenness, followed by asymmetry on both sides, etc., for which many people are deeply troubled. If you suck too much or don't get it, you can fix it by adding and subtracting fat. The main reason for the unevenness of liposuction may be that the doctor is not skilled enough in liposuction and the mastery of deep and shallow liposuction is not accurate enough.

Liposuction is generally to suck the middle layer and retain the superficial fat, which is actually a great test of the doctor's skills. One of the most important aspects of liposuction is that the doctor uses both hands to sense the depth of fat, and then performs precise liposuction to reduce the damage and ensure the postoperative effect.

In addition, there may be personal reasons for the unevenness, many people have uneven fat when they are not absorbed, which is caused by the accumulation of lymphatic fluid in the adipose tissue for a long time. This situation is related to the amount of water content of fat, so it is recommended to use ** microsculpture during the operation, and wear shapewear for a period of time after surgery to help solve it.