How to enter Recovery mode on LG G3

LG G3 enters Recovery mode.

1. First of all, please turn off LG G3, this is really easy to do, press and then select Power Off (Power Off) and wait for the phone to turn off, and then wait for ten or twenty seconds to make sure that the device is indeed turned off.

2. Now press and hold the volume down button and the power button at the same time, and see the LG logo displayed on the phone screen, it may take 2 to 3 seconds.

3. At this time, let go of the button that has been pressed, and then quickly press and hold the volume down button and the power button again, and after a while, you will see the recovery screen appear.

4. Let go of the button that has been held down, and now, LG G3 is in Recovery mode.

The method to enter recovery is:

1) Turn off the phone completely.

2) Press and hold the volume down button and the power button at the same time in the shutdown state, and see the LG logo displayed on your phone screen, which may take 2 to 3 seconds. At this time, let go of the button that has been holding down, and then quickly press and hold the volume down button and the power button again

After a while, you will see the recovery screen appear, let go of the button that has been holding down.

Now, LG G3 is in Recovery mode.

The 5 options in recovery mode are explained as follows:

Reboot System Now--- reboot your phone.

Wipe Data Factory Reset--- erase the data area, which is equivalent to a factory reset.

wipe cache partition --- erase the cache area.

3) Use the volume button to select and the power button to confirm in recovery mode. You can perform operations such as factory reset, and complete factory recovery through recovery mode

1.After entering the recovery mode, select "Wipe Data Factory Reset" by "Volume-" button, and press "Volume+" button to confirm (to enter the next interface).

2.Use the Volume-" button to select Yes Delete All User Data, and use the Volume+ key to confirm that the data partition data is cleared.

3.After entering the recovery mode, run the "Volume-" key to select "Wipe Cache Partition" and press the "Volume+" key to confirm the operation to clear the cache partition data.

4.Restart your phone when you're done.

2.You can also use software such as flashing wizards to connect to a computer and enter it with one click.

3.Long press the power + volume down to restart in the state of boot trembling and stupid dust (or long press the power gear Changyuan + volume down to turn on in the shutdown state) and wait until the LG logo appears, quickly release the two buttons, and then press the power button again in an instant, you should enter a white screen interface and ask if you want to reset, let go of the power button when this eggplant Zen, and then press the power button to confirm, and directly enter the recovery (don't try if you haven't brushed the REC).

Turn off the phone for more than 10 seconds, confirm that the [Volume Down] and [Power Button] are completely turned off at the same time, release the screen after it lights up, and then continue to press and hold the two buttons, and continue to press the [Power Button] to enter the recovery mode after the screen appears Hard Reset.

Here's how:

1. Press and hold the [Volume Down] and [Power Button] at the same time, release the screen after it lights up, then continue to press and hold the two buttons, and continue to press the [Power Button] after the screen appears Hard Reset.

2. Use the volume button to move in recovery mode and confirm with the power button.

Try it with the flashing wizard, just one click.

First of all, please turn off LG, then select Power Off, and wait for your phone to turn off for another ten or twenty seconds to make sure that the device is indeed turned off. Let's take Lenovo mobile phone as an example, let's turn it off first, and then press and hold the "Power button, Volume +, Volume —" as shown in the figure below (press at the same time).

Then press and hold the volume down button and the power button at the same time. You'll see the LG logo appear on your phone's screen, and it may take 2 to 3 seconds for you to let go of the button you've been holding down. Wait for the screen of the phone to light up and release the button, we can enter the phone recovery interface, if there is no success, repeat the first step;

Then quickly press and hold the volume down and power buttons again for a while, and you'll see the recovery screen appear, let go of the button you've been holding down.

Then your LG G3 is already in recovery mode to complete.

Let's take Lenovo mobile phone as an example, let's turn it off first, and then press and hold the "Power button, Volume +, Volume —" as shown in the figure below (press at the same time).

1. Turn off the phone first, take out the mobile phone ** card, put on the battery, and cover the back cover.

2. Press and hold the power button and the volume + button at the same time, wait for about 3 5 seconds, and wait until the Newman logo appears to be released, and the robot will fall to the ground after release.

3. At this time, you just press the "small house" button, and a lot of English words will appear immediately.

4. At this time, press the volume - button to lower it until the line of wipe data facetory reset!

5. After adjusting, press the menu button again, and a lot of "no" English words appear.

6. Next, press the volume - button to lower it until the line of yes --delete all user data!

7. After adjusting, press the menu button again, the robot stands up, and a lot of English words appear next to it, at this time, the phone is cleaning the data, wait for 3 5 seconds, the first step is to clean up the data successfully! 8. Next, press the volume - button to lower it until it reaches the line of wipe cache partition!

9. After adjusting, press the menu button again, and a lot of English words appear next to the robot, at this time, the phone is cleaning the data, wait for 3 5 seconds, and the second step is to clean up the data successfully!

10. After the second step is to clean up the data successfully, press the menu button, the phone screen will go off, don't touch it at this time, it will automatically start after a few seconds, and the logo will appear! Don't touch it at this time, wait for about half a minute, because the data of the phone has been cleaned up, and the startup will be relatively slow, wait patiently! The phone will automatically turn on, and after that, you can turn it off, install the phone ** card, and then turn it on!

You can readjust the time, desktop map, and other settings yourself!