How about KITO tiles, how about Jinyi ceramic tiles KITO

Jin Yitao's bricks are OK, more beautiful, moderate, I like his antique bricks, if they are well matched, they will be very beautiful, do anything, if you do it with your heart, you will be able to do it well!

Let's share with you a few tips on how to choose tiles:

Knock and listen to the density. There are many criteria for distinguishing the quality of tiles, you can knock them, the crisper the sound, the higher the degree of porcelainization, the better the quality. You can also use the left thumb, index finger and middle finger to clip the corner of the tile, hang down easily, and tap the middle and lower part of the tile with the right index finger.

Measure and see the water absorption rate of ceramic tiles. The lower the water absorption rate of the tile, the higher the internal stability of the tile, and the more suitable it is for wet water or spaces with high moisture content, and will not cause problems such as dark spots. The common way to test the water absorption rate of ceramic tiles is to pour water on the back of the tile, and the quality of the tile with slow penetration or even non-permeability is better, and vice versa.

Scrape, from the traces to see the quality. Check the surface quality of the tile, you can scrape the glaze of the tile with a hard object, if it leaves traces, it means that the quality is poor.

Look and observe the color and flatness. The clearer the color of the tile, the better, with the naked eye to see if there is a pinhole, the pinhole is easy to accumulate dirt, and finally observe the flatness of the tile, the side is straight, easy to pave, and the effect is good. In home decoration, if you want to save tiles and reduce the cost, it is recommended to consider the following points:

1) Find a designer, choose the appropriate specifications, and draw a brick drawing. Calculate the number of tiles according to the drawing, plus normal construction loss.

2. Choose varieties that do not have high requirements for "spelling the right suit" and "spelling the pattern", so that the cut half (or edge strip) can be used in other places.

3. Adjust the plane and façade design to avoid places where the riser and small corners must be cut, easy to break, and waste tiles. 4. Clever use of waist line, other specifications of brick parquet color, ground circle edge line, vertical decorative line, bathroom wall mirror size and other aspects of the design, enrich the effect at the same time, avoid or reduce brick cutting.

5) Master the principle of "small bricks and bricks" for home decoration. Combined with the design effect, the small size is reasonably selected.

6. Choose the best ceramic tiles and skilled workers, and reduce unnecessary loss when construction and cutting. Although the unit price is slightly higher, it is still saved.

Teach you to identify the *** bad of the tile.

First look. Judging the quality of the tile by looking at the surface of the tile, the higher the gloss of the tile, the better the density of the tile sintering. Good ceramic tiles, its glaze presents a crystal clear feeling, under a certain care like a mirror can reflect the light, while the poor magnetic ring glaze is dull.

Second listening. Distinguish the quality of tiles by listening to the sound, and the tiles with crisp sound indicate high density. Hold the tile with one hand and tap the tile surface with the other. The sound of good tiles is crisp and bright, and the sound of bad tiles is dull.

The third fall. Judging the quality of the tile by falling, a good tile is not afraid of falling, indicating high strength. Good tiles will not be damaged after falling vertically, and bad tiles will be broken when they fall.

Fourth Title. The quality of the tile is judged by the weight of the tile, and the good tile has a large weight and high density. Good ceramic tiles are heavier, more solid, uniform thickness, no corners and other defects, poor quality tiles are relatively light.

Fifth wet. Detect the water absorption rate of the tile to check the quality of the tile, generally after the tile is fired at high temperature, the water absorption rate is low, and the water sprinkled on the tile will not diffuse. But poor tiles, after the water is poured, there will be a significant water absorption reaction.

Sixth press. Check the quality of the tile by pressing the tile, the better the tile bearing, the better the quality. During the test, the tile is suspended in the air, and the person stands on the tile, if the tile is basically not damaged or cracked, it means that the bearing capacity of the tile is very good.

Poorer tiles are prone to disconnection or cracking and cannot withstand heavier weights.

The seventh mill. Judging the quality of the tile by "grinding", you can use the ordinary key to scrape the surface of the tile, leaving no scratches, indicating that the tile has strong wear resistance and good quality. You can also write brush words on the tile to leave traces, wipe with an ordinary rag, if there are no traces, it means that the tile has good corrosion resistance and good quality.

Eighth pick. By looking at the color of the tile base, check whether the quality of the tile is good. In general, the color of the bottom material belongs to the beige white to beige, if the color of the base material is yellow or black, it means that the tile contains too many impurities, not a good tile.

Jinyi Tao ceramics, the courage to innovate, good at thinking, known as "thinking tile", the wind to China, leading the quality of life. Jin Yitao overall space pilot, noble life without borders, the wind to China, look at the world. "Distinguished space, universal sharing", since the date of its establishment, Jinyi Tao ceramics **** is based on this, "always adhere to internationalization", with the global synchronization of porcelain glazed tiles (antique bricks), exclusively provide "ceramic tile space overall solution", unswervingly fulfill the "noble" commitment, from home to foreign countries, from home to engineering countless kito users, to create a noble space, enjoy a high-quality life.

The quality of the bricks of Jinyi Tao is good, this brick was produced together with Dongpeng earlier, is one, and later separated, but the quality control is not bad, it is also a famous brand in Guangdong, in addition to the brick ** unless the merchant clearly states that it is a first-class product or other foreign products, the general quality will not have a big problem, and the counterfeiting of ceramic tiles is difficult;

At the same time, if you take it to the processing plant, there will generally be no problem with processing, but it is the phenomenon of planing edge with manual cutting machine, mainly because the texture is relatively hard and the water absorption rate is low.

Tile scoop, not bad, uneven, size problematic.

It seems to be a good song.

Dongpeng, Marco Polo, Eagle Brand, Xinyan Orange, Mona Lisa, Hai Manlin, etc., are similar to Jin Yitao.

They are all relatively high-quality brands.

1. The main difference between the whole tile and the ceramic tile is the water absorption rate, the whole tile has a strict water absorption standard, only the lower water absorption rate of the tile is called the full tile, and the general ceramic tile water absorption rate is greater than.

2. The low water absorption rate of the whole tile makes the adhesion between the tile and the wall cement mortar small, and the wall is not very well bonded, easy to fall off, and is generally used as floor tiles, while ceramic tiles can be used as wall tiles and floor tiles.

3. The hardness of the whole tile is higher than that of the ceramic tile, and the production process of the whole tile should be more fine, and the corresponding full tile should be a little more expensive.

Jinyi ceramic bricks, the process is still leading in the industry, and it feels more textured.

In fact, it is very easy to judge, the same **, when the size and thickness are the same. The heavier, the better!! This is relative, because the greater the weight, the greater the density, the permeability of the brick is good, and it is not easy to pollute!

In addition, you need to measure the diagonal when you buy, the difference between the two diagonals is generally less than 2mm as well, too large will appear when laying, not cracks!! Second, find a professional level, measure the flatness, and see if the corners of the bricks are pretty and staying!! It's all satisfied, this is a good brick!!