What to do if the Lenovo phone launcher is not running

If you have manually disabled the launcher before, you can try to go to System Settings - Applications - All, find the deactivated software, and enable it. In addition, the program of system protection usually cannot be deactivated directly, and can be reactivated by restarting the phone. If you want to disable the software through a third-party system management software, it is recommended to start it on the corresponding software.

But if the launcher stops running on its own, the program stops running, this is the way the Android system is designed to avoid the crash of the whole system when the program reflects slowly or the program is abnormal, and it is normal to appear occasionally, it is recommended to restart the phone to observe and use. If it occurs frequently, it is not excluded that some operations or some software of the first class are incompatible with the system and cause the abnormal cause of the mobile phone system, you can back up the contacts, text messages and other data to avoid inconvenience caused by data loss, and then restore the factory settings. If it still doesn't work, you need to re-flash the machine, because flashing is risky and may affect the warranty of the device, it is recommended to go to the repair site to flash the machine.

This situation does not rule out that some operations or some software of ** are incompatible with the system, resulting in the abnormal cause of the mobile phone's system. You can back up your contacts, text messages and other data to avoid the inconvenience caused by data loss, and then restore it to factory settings.

If it still doesn't work, you need to re-flash it. Due to the risk of flashing and the possibility of affecting the warranty of the device, it is recommended to go to the repair site to flash the machine if necessary.

The solution for Lenovo phones to show that the launcher has been turned off is as follows:

1. Force restart the phone to try;

2. Try to turn on the machine after restoring the factory settings;

3. If this problem cannot be solved, it can only be repaired and after-sales warranty treatment.

The steps to do a factory reset are as follows:

1. Turn off the phone completely;

2. When the phone is turned off, press the power button first, and then immediately press the volume down button + volume up button at the same time and don't let go, it will enter recovery after a while, note: press the volume up and down keys in recovery mode to select, and press the power button and home button to indicate OK;

3. After entering the recovery mode, you can choose to restore factory settings, no matter whether the phone is a recovery that comes with the system or a third-party recovery, as long as there is [wipe data factory reset];

4. Select [Wipe Data Factory Reset], then press the boot button to confirm, and then select [yes - delete all data].

5. Then re-select [Reboot System Now], press the power button to confirm, and then start the phone.

Dear Lenovo users, hello!

What program has been installed recently.,Uninstall it and see.,If it doesn't work, it's only flashing.。

The program stops running,This is the way that the Android system is designed to avoid the crash of the whole system when the program reflects the slow or abnormal program,Occasionally,It may be due to too many background programs,Insufficient running resources cause the program to be terminated unexpectedly。 It is recommended to use the mobile phone acceleration function of security software such as Le'an, close the system background program, or restart the mobile phone to observe and use;

If it occurs frequently, it is recommended to try the following:

1. It may be caused by the conflict and interference of some third-party software, it is recommended to try to uninstall the recently installed suspicious software, or back up the data for factory reset (PS: remember to back up the data before operation to avoid personal data loss).

2. If it appears after modifying the system file after root, it is not excluded that the system file is abnormal, and it needs to be re-flashed.

3. If you try the above operations and still can't solve the problem effectively, it is recommended to take the time to go to the local Lenovo after-sales service center and let the engineer help detect and solve the problem.

It is recommended to restore factory settings: Go to [Settings] - [Backup & Reset] - [Factory Reset], you can check [Backup data before reset] and [Format internal memory card] as needed, and finally click [Reset Phone] and follow the prompts. Back up data before reset: If you select this option, you can back up important data content for restoration.

Format Internal Memory Card] When this option is checked, all data contents from the internal memory card will be erased, including the data backed up on the internal memory card.

Lenovo phones all stop running, which can be solved by restarting the phone, cleaning up data, and restoring factory settings.

1. There are too many running programs in the system, resulting in insufficient running memory, and one-click cleaning can solve such problems (restarting the phone can also be used);

2. There are too many application data caches on the mobile phone, it is recommended to click on the desktop - Settings - General - Applications - All - find the program that stops running - clean up the data;

3. Caused by improper installation position, enter Settings--Storage--Preferred Installation Position--Determined by the system (some models do not have a preferred installation location option);

1. Connect the standard charger to charge, change the charger and try to restart it to ensure that the phone has power.

2. If the battery is removable, you can restart the phone by removing the battery; If the battery is not removable, press and hold the power button for 8 seconds, and then press and hold the power button for a short time.

3. If you still can't turn it on, contact the after-sales site to help with testing and maintenance.

The steps to do a factory reset are as follows:

1. Turn off the phone completely;

2. When the phone is turned off, press the power button first, and then immediately press the volume down button + volume up button at the same time and don't let go, it will enter recovery after a while, note: press the volume up and down keys in recovery mode to select, and press the power button and home button to indicate OK;

3. After entering the recovery mode, you can choose to restore factory settings, whether your phone is the recovery that comes with the system or the recovery of a third party, as long as there is [wipe data factory reset];

4. Select [Wipe Data Factory Reset], then press the boot button to confirm, and then select [yes - delete all data].

5. Then re-select [Reboot System Now], press the power button to confirm, and then start the phone.

Open the back cover, pull out the battery, put it back in, and then press and hold the power button to start.

Mingkai, the garbage, you

1. The memory of the mobile phone is insufficient;

2. Mobile phone system failure.

Solution: 1. Restart the phone;

2. Clean up the system cache and junk after booting, and delete the software that is not often used to release the memory;

3. Restore the factory settings, if it is not possible to solve the problem of direct repair and after-sales warranty treatment.

The steps to do a factory reset are as follows:

1. Turn off the phone completely;

2. When the phone is turned off, press the power button first, and then immediately press the volume down button + volume up button at the same time and don't let go, it will enter recovery after a while, note: press the volume up and down keys in recovery mode to select, and press the power button and home button to indicate OK;

3. After entering the recovery mode, you can choose to restore factory settings, no matter whether the phone is a recovery that comes with the system or a third-party recovery, as long as there is [wipe data factory reset];

4. Select [Wipe Data Factory Reset], then press the boot button to confirm, and then select [yes - delete all data].

5. Then re-select [Reboot System Now], press the power button to confirm, and then start the phone.