Do you have an English expert to help translate a more professional text?

1. This model (formula) operates in countries with basically the same topography, climate, science and technology and economic system. This assumption is called the homogeneity or isotropic assumption.

2. Raw materials should be selected in a fixed place where the consumption is famous and concentrated.

3. Labor (labor) is basically fixed locally, but it can also be transferred from other industrial units without restrictions.

4. The freight is directly determined by the weight of the item and the transportation distance.

12.Gas emissions.

Machinery involved in ensuring that the emissions of nitrogen oxides meet the requirements are defined as follows:

Burner for the main kiln.

Ignition equipment at the end of the kiln.

Cyclone preheater for calciner is available.

Machinery involved in ensuring that sulphur dioxide emissions meet the requirements are defined as follows:

Raw meal mill and main filter.

Performance Guaranteed. Emissions of nitrogen oxides.

Measurements were taken at the main exhaust port with an average of up to 500 [mg N3," per day

mg] = nitrogen oxide and nitrogen dioxide are both NO2 emissions.

nm3] = m3 and 101325 [pa, a] located at [k].

a] = Absolute pressure.

] = standard condition = dry gas based on O2 = 10 [%v v, d].

Emissions of sulphur dioxide.

Measurements were taken at the main exhaust port with an average of up to 400 [mg Nm3," per day

mg] = emissions of sulfur dioxide.

nm3] = m3 and 101325 [pa, a] located at [k].

a] = Absolute pressure.

] = standard condition = dry gas based on O2 = 10 [%v v, d].

Prerequisites for guarantees.

The provisions of Section 8 'Clinker Combustion Department' will be a prerequisite for the 'Clinker Production System'.

nox :so2:

Sulfur oxide emissions are guaranteed to meet the following requirements:

Measure the sulphur content of pyrite at the kiln inlet and calculate the difference between sulphur and sulphur trioxide and not exceed the estimate.

w/w]。(Sulphur as the calculation of all numbers).

Test the procedure. Methods of measurement.

Performance testing will be carried out jointly by the owner and contractor, or by a testing company appointed by mutual agreement. The owner will bear the cost of the test.

If the measurement is performed by a third party, the contractor reserves the right to come to the site to supervise the performance test and may conduct the test in person without restriction depending on the circumstances.

The O2, SOX and NOx levels of the exhaust port should be continuously measured in % and ppm. The average value should be calculated based on the average of the field readings per minute during the test. SOX and NOx values are calculated in terms of MgN3 when O2 is 10%.

During the test, the raw meal needs to be sampled every hour. If necessary, the test results can be evaluated and corrected by means of sample analysis.

Test duration.

The duration of the performance test will consist of three one-hour tests under normal operating conditions. The average of the three tests will be taken as the test results. If both the owner and the contractor agree, the testing time can be shorter than the above.

Maximum number of interruptible times.

does not exist. English Cattle Troupe].

There is still time, I will translate for you when I am free, remember to leave the distribution to me.

12 - Gas emissions.

Machinery involved in ensuring NOx emissions is defined as follows:

Main kiln burner.

Back-end launch device.

Cyclone preheater calciner vessel.

Machinery participation in the guarantee guarantee of sulfur dioxide emissions is defined as follows:

Original and main filters.

Performance Guaranteed. Emissions of nitrogen oxides.

Daily average, as measured by the main stack, maximum: 500 [mg nm3,].

Magnesium] = mg without and nitrogen dioxide is calculated as nitrogen dioxide.

nm3]=[and[3]101325[Palestine, 1]= absolute pressure.

]== dry gas in standard conditions oxygen = 10 [five percent, four].

Sulphur dioxide emissions.

Daily average, as measured by the main stack, maximum: 400 [mg nm3,].

Magnesium] = milligrams of sulfur dioxide.

nm3]=[and[3]101325[Palestine, 1]= absolute pressure.

]== dry gas in standard conditions oxygen = 10 [five percent, four].

Guarantee of conditions precedent.

As a prerequisite, the clinker production system shall be effective in the clinker firing sector specified in Section 8.

Nitrogen oxides: sulfur dioxide:

To ensure the following application permissions:

Pyrite sulfur containing sulfur in kiln feed, calculate the difference between total sulfur dioxide and sulfur trioxide, and must not exceed the expected figures watts [% of all figures calculated sulfur].

Test procedures. 1. Measurement method.

The performance testing will be carried out by the employer and the contractor or by the inspection company that is mutually acceptable to the employer and the contractor. The cost of the test should be paid by the employer.

In the event of a third-party test, the contractor has the right to attend and supervise the performance of the test and perform its own measurements related to the emissions field.

The levels of oxygen, sulfur and nitrogen oxides in the stack should be constantly measured in % and concentration, respectively. The average position reading should be calculated on average per minute during the testing phase. The values of red sox and nitrogen oxides were recalculated at 10% mg nM3O2.

The raw meal of the test sample must be taken every hour. If necessary, test samples should be analyzed, evaluated, and corrected.

Time test and maximum permissible interruption.

The test of time.

Time performance testing should consist of 3 tests every 1 hour under normal operating conditions. An average of three tests will make up the final test results. By agreement between the owner and the contractor, there may be times during the test that are less than the specified value.

There is no maximum permissible interference.

If the free space in front of the robot in the hallway is less than the threshold, the robot will turn in the direction where there is more free space (i.e. away from the obstacle).

Turn to the target. As long as the space in front of the robot is greater than the threshold, it will turn to the target and abandon the steering target.

If there is an obstacle next to it and the transformation is encountered, the robot will not turn and will continue to move straight forward.

If the space in the aisle in front of the robot falls below the threshold, the robot will turn to the place with more space, that is, to leave the obstacle.

c Steering to the target.

The robot will only turn to the target if the front space is greater than the threshold.

d Overturn the steering target.

If there is an obstacle that the robot is about to hit when it is turning, the robot will stop turning and continue to walk in a straight line.

Please click to adopt.

It's a wonderful thing to find someone you love and love you, a really good feeling.

But it's a much better feeling to find someone who really has a heart to heart (a soul mate).

A soulmate is someone who understands you better than anyone else, loves you more than anyone else, and will always be waiting for you no matter what happens.

People say that nothing lasts forever. But I firmly believe: for some people, even if they die, their love lives on!

It's not easy to find someone you love and love you, but it's not easy to find someone who understands you.

That's what it means.

It's a wonderful feeling to find someone you love and love you. And finding a true love is a feeling like never before. A true soulmate is someone who really understands you who is different from everyone else.

Anyway, the people who are waiting for you there. It is often said that nothing lasts, but I firmly believe that some love will be cherished when it is lost.

It's nice to meet someone you love and she loves you, but it's like to be able to meet a true spirit partner. A spiritual partner is a person who understands you very well, loves you very much, and will always be there no matter what, some people say that nothing can last forever, but I firmly believe that love will always exist after people leave!