The solution to the failure of the car to start at one click

"Smart key" has become an increasingly popular configuration. All we need to do is put the key in our pocket, and when we get a certain distance from the car, the door lock will open automatically; Entering the car, just press the start button (or knob), the car will be ignited and started, and it is very square to use the mobile butler car intelligent system most: the car remote mobile phone starts.

One-key start PKE, mobile butler brand special car, barge-free installation, start the engine in advance, to achieve the effect of warm in winter and cool in summer, to provide comfort for the driver.

Function introduction: mobile phone ** start one-key start induction switch door lock remote control start automatic anti-theft) to achieve intelligence without key car use).Remote phone ** start:

Don't worry about the location of the car parking beyond the coverage of the remote control, **control the start of the engine to turn on the air conditioning, the owner only needs to call ** through the mobile phone ** to give the car a remote control command, you can start the air conditioning, warm in winter and cool in summer;

2.Remote control start within 80 meters at a short distance: convenient for the owner to operate, can not be controlled;

3.One-key start: one-key button start after getting on the bus, one-key turn off before getting off, no need to bring a key;

4. Keyless entry, intelligent induction door opening and closing, when you approach the vehicle 1 meter, the system will automatically open the four door locks, eliminating the tedious action of looking for keys everywhere and pressing the remote control in a hurry! Automatic window closing: lock the car after turning off the car and automatically close the window (equipped with a special window closer);

5.Fuel-saving intelligent function: 15 minutes before starting the vehicle, the user can use the remote control or mobile phone to remotely preheat up, and automatically turn off the engine when not getting into the car, so that he can enjoy winter driving;

6.Realize all-round intelligent safety car use: remote control unlocking, one-key start driving when getting in the car, one-key shutdown when parking, remote control lock after getting out of the car, automatic anti-theft, automatic window closure (with);

7.On-site remote control function (start the engine, turn on the air conditioner, turn off the lock, unlock).

8.It can be controlled nationwide (locking, unlocking, remote monitoring, remote flame-out).

9.On-site alarm function.

10. The vehicle automatically alarms.

11 sub-region** alarm notifications (door opening alarm, illegal start alarm, vibration alarm).

12 Anti-Illegal Start.

13 Tail box function.

14 Parking door flashing light function.

15 Vibration alarm deterrent function.

If mine is helpful to you, remember to light it up, thank you!

This will happen more often in the future. The reason is that there is strong electromagnetic interference in the vicinity, which breaks the connection between the key fob and the car. The solution is to lock the car with the intelligent health of the door or the manual central control mode when locking the car.

When starting the car, press the foot brake and at the same time put the logo of the remote control key close to the starter, then the green indicator light of the starter is on, and the button is on the car.

1) See if the key is by your side, because the one-button start is inducted by the key, and the key cannot be started if it is not there. If the co-pilot takes the key away temporarily, then there is only one way to wait.

2) Check yourself for a mistake. If the novices just press the button and don't press the brakes, the car will be powered on, but the engine will not start. Another situation is that you don't hold it long enough, or you don't press it to the end.

3) The gear is not placed in the P position.

Then there is the problem of "induction".

1) Often put the car key next to electronic devices such as mobile phones, computers, TVs, etc., resulting in interference with the low-intensity radio waves in the key, or there are strong radio waves nearby at this time, such as TV towers, airports, power plants, etc., and the phenomenon of "failure" will occur when the key starts.

2) The car key is out of power. If the key has a shortened remote control distance and insensitive sensing, it is a sign that the car key is about to run out of power. In the state of no power, the one-button start function cannot work normally, and the battery should be actively replaced as soon as possible.

3) Car breakdown. For example, when there are extreme situations such as oil circuit problems, battery failure, short circuit of electronic components, don't think about it, call the staff of the 4S store directly! Look!

The car starts with one button and no response? The car does not respond to the one-button start, which may be due to the following reasons: 1. The reason for the key. For example, the key is out of power; The key's radio waves are interfered with, and so on.

If you often put the car key next to electronic devices such as mobile phones, computers, and TVs, it is easy to cause the low-intensity radio waves in the key to be interfered with, which in turn makes it difficult for the sensors in the car to sense.

Solution: You can change the battery of the key first. If it is not possible to change the battery, it is generally equipped with a mechanical key, and the mechanical key is directly inserted into the keyhole to start.

2. The gear is not in P gear. Now the vast majority of models, the gear is not in the P gear can not be ignited, this is the manufacturer in the production of the car for safety design, in order to prevent the gear in the D gear or R gear ignition, the car forward.

Solution: Hang the gear to P gear and re-ignite.

3. No brakes were applied. The one-button start of many cars requires stepping on the brakes to start the engine, and if you don't step on the brakes, it just connects the circuit in the car, which is also designed for safety.

Solution: Ignite with the brakes.

4. Problems with the car itself. If this is the reason, the scope is too wide, and it is best to call the 4S store to help take a look.

Reasons why there is no response to one-button start: 1. The key is out of power or the car is out of power; 2. The gear is not in the P gear position, and some models cannot ignite if the gear is not in the P gear; 3. The brakes are not stepped on when starting, and many cars need to step on the brakes to start the engine when they start with one button; 4. If there is a failure problem in the starting system of the car, it is recommended to go to the maintenance plant for inspection and maintenance. The one-key start is different from the traditional mechanical key ignition method and the traditional start program, as long as the key start button button can be gently pressed to start the flameout, avoid the trouble of losing the key and finding the key, and most of the time you need to step on the foot brake in the process of ignition.

If there is no response when the car starts with one button, it means that the starting equipment is faulty, so in order to ensure that the car can drive safely, it is important to repair and deal with it in time.

When communicating with others on a daily basis, you need to pay attention to the following points:

1. Learn to listen. Listening more will allow you to receive more information that is easy to ignore, when to say more, and it is better to listen more and talk less, which will reduce the chance of making mistakes, and also make yourself appear more meaningful and deep.

2. Humble attitude. When speaking, you should put yourself in a humble perspective, not too confident, and not arrogant, otherwise it will affect your interpersonal relationships and work efficiency at work at any time. When encountering things, it is best to discuss them with others, and do not insist on going their own way.

3. Be concise and to the point. The expression of ideas and ideas should be concise and to the point, concise and effective description can better complete the communication of the work, which is the performance of the ability to work, and accurate expression can reduce the working time by more than half.

4. Learn humor. Humor can bring oneself closer to others, but also resolve many conflicts, when there is a misunderstanding of work communication, humor can change the awkward atmosphere, is a skill that must be mastered in the workplace.

5. Use praise more. Only by praising others can you show your courage. Praising the merits of others will gain the respect of others, and at the same time, you will be more motivated to learn.

Landlord, I have encountered this situation once, but the specific reason, has not been reasonably explained, Kenneng is improper operation, may be electromagnetic interference, and so on, it is possible. My workaround:1

Make sure the gear is hung in P gear. 2.Pull up the handbrake 3

Make sure the vehicle is completely shut down and not energized. 4.Make sure there is no other key in the car, just you.

Hello, I have seen your question and am sorting out the answer, please wait a moment thank you.

First, the driver does not step on the brake pedal to start the vehicle requires the driver to step on the brakes, which is to avoid the vehicle starting with gear, so if the driver does not step on the brakes, there will be no reaction when pressing the one-button start button. Second, the vehicle does not detect the car key, which may be signal interference or the car key is out of power, at this time, you only need to put the car key in the induction area of the vehicle to recover

One-button start sometimes does not respond to the reason:

1. Generally, the vehicle cannot be started due to the brake switch, or the battery is not in good contact.

2. You can first half-drive the car key, let the car self-check, and see the prompts given by the driving computer.

3. Then if the conventional ignition still can't be hit, it is either engine failure or no oil.

4. If it really doesn't work, then go to the after-sales service to repair the cause of the failure.

One-button start sometimes does not respond to the reason:

1. Generally, the vehicle cannot be started due to the brake switch, or the battery is not in good contact.

2. You can first half-drive the car key, let the car self-check, and see the prompts given by the driving computer.

3. Then if the conventional ignition still can't be hit, it is either engine failure or no oil.

4. If it really doesn't work, then go to the after-sales service to repair the cause of the failure.

Hello, first check whether the battery is in a serious state of power loss. In addition, if the vehicle enters the anti-theft system, it is not used, and it is a problem on the line. Hope it helps! Hope.

There may be two reasons why the car does not respond when pressed with a button to start:

1. The driver did not press the brake pedal.

The start of the vehicle requires the driver to step on the brakes, which is to avoid the vehicle starting with gear, so if the driver does not step on the brakes, there will be no response when pressing the one-button start button.

2. The vehicle did not detect the car key.

This may be signal interference or the car key is out of power, at this time, you only need to put the car key in the induction area of the vehicle to recover, the specific operation steps are as follows:

1. Open the driver's door of the car.

2. Place the car's smart key in the front of the induction slot, which is the storage slot.

3. Press the brake pedal of the car.

4. Press the car's one-button start button.

5. The instrument of the car lights up and the vehicle starts.

Precautions: 1. This method is not a problem, but a temporary solution.

2. When the vehicle is back in use, the battery should be replaced as soon as possible.

Hello: The car one-button start does not work may be caused by the failure of the one-button start switch, and the owner can replace the switch in time. The one-button start device is a part of the smart car, which is a button device to achieve a simple start process, and can also be turned off, the device can be modified at the position of the original car key lock, or it can be modified with an independent panel.

Its starting mode is a software one-button start, and there are three main points to pay attention to when installing a one-button start system for cars (plug line under the ignition switch, the position of the button and the handling of the direction lock), which has a variety of functions. Start method: Open the door with the central control, press the one-button start button, after the instrument is on, step on the brake and press the car to hit.

Cars with manual transmissions remember to put in neutral gear.

Hello friend, if your car can't be started with one button, there are several fault reasons that will cause you to have this failure. The first cause of the fault is that the battery of your remote control is too low, which causes the remote control to not send this unlock start signal. First of all, if you want to solve the problem, first replace the battery of this remote control, and replace the battery.

The second problem is that there is a problem with the receiving antenna of the control module on your engine, which needs to be connected to the vehicle with a computer for diagnosis. Repair according to the fault**, replace the antenna or repair the module.

You mean the boot doesn't work right now, right? Pressing the button to start the machine not working? Isn't that what it means? If your starter is not working, you check the starting relay. And is there any damage to the starter itself? Take this one by measure.

Ask <>

If the answer is not good, then you can't rule out that your starter is damaged! Also, have you checked the battery too low in this starting battery? If the battery is not good, if the battery power is too low, it will also lead to the inability to start, which cannot be ruled out.

You can ask the maintenance technician to come over and get a battery to help you take a look.

If it's not suitable, you're a friend of the boot problem, a boot bug. No, you have a faulty starter, definitely check the starter.

1. Take the wire: This is a necessary item for the car to take the electricity, do not take two wires to make do, because the instantaneous current of the vehicle at the start can reach 200-600A, and the diesel car even reaches 1000A, if it is calculated, 10 square copper wires can ensure the smooth and safe start, so the car battery connection line must buy the right brand, the quality is the best, do not try to be cheap. This is one of the must-have items in the car, once the battery is out of power, you can take it out and use it, and you can also help others when you don't use it.

2. Emergency power supply: This is a new type of power bank like a thing, there are two kinds of lead-acid and polymer lithium battery, which can help the vehicle with a loss of power to start, and can also have lighting, charging mobile phones and multi-functional supplies used with an inflatable pump to inflate the car. And it is generally portable, very lightweight, if you have it, you don't have to ask others for help.

Be sure to charge it in time after use and keep it full of power to deal with emergencies.

3. Positive, first connect the positive: first turn off all the electrical equipment on the car, make the key in the OFF position, open the cabin cover to find the battery, there are positive and negative poles written on the battery, generally the red "+" sign is the positive pole, and there are generally two wires, at this time, take out the red one, open the battery cover, pinch the clamp on the head to clamp firmly the positive pole of the battery of the electric car, and the clamp at the other end to clamp the positive pole of the battery of the rescue vehicle. Be sure to connect the positive electrode first, then the negative electrode, do not reverse the order, and do not use the battery clamp to touch anywhere except the battery pile head.

4. Negative connection, negative connection: After the red positive electrode is connected, take out another wire, first clamp the negative pole of the tram battery, the negative electrode is generally black "—" number, and then pinch the other end of the clip, from beginning to end the clip do not touch other places, to clamp the negative pole of the rescue vehicle battery, when the connection will pop out of the electric spark, please don't be afraid, this also shows that you are right. The reason why the negative electrode is not connected first is because the whole vehicle is basically a negative electrode (that is, commonly known as "tie iron"), if the negative electrode is connected first, when connecting the positive electrode, the clip will cause a short circuit and burn the parts on the car when it touches any conductive place in the body.

5. After starting the vehicle, first remove the negative, and then dismantle the positive: after the battery is connected, the rescue vehicle will first ignite and charge the battery, and then the no tram enters the vehicle to open the key, at this time the instrument light will be lit smoothly, and then try to ignite (not more than 5 seconds), if it fails to start smoothly, step on the accelerator of the rescue vehicle, and the speed is kept at about 2500 rpm, and then the tram is ignited again, if the starter is no problem, the car has oil in the case of general can be started smoothly, after the non-electric vehicle starts, Remove the negative clamp first, then remove the positive clamp, for the same reason as why the negative pole is followed by the fourth one.

The positive and negative poles of the battery must not be reversed, and the order of assembly and disassembly should be strictly in accordance with the order of first connecting the positive and then the negative, and the first dismantling and then the positive.