Seek Skyworth 29TKDA s bus input method data! Some masters, please send a 5

SKYWORTH 29T15AA into the bus method is here:

Have fun!

The operation methods of the incoming bus are as follows:

6p18: Press and hold the panel accompaniment to 0;

Press the remote control screen display key to enter the bus;

Press the 6 key to enter the password 789, and press the menu key to turn the page.

3d28: Press the volume of the remote control or the local button, and the volume will be reduced to zero;

Press and hold the "Mute" button on the remote control for 4 seconds to enter the bus. Press the perpetual calendar or standby button to exit factory mode, press the v12 button once under the Adjust Geometric Linear menu and Adjust Image Curve menu in factory mode to enter maintenance mode, and press again to exit factory mode.

Skyworth 29T19000 bus.

T Series: Enter: Press and hold the volume down button on the panel at the same time, and press the display button on the remote control with the other hand to enter S mode; Let go, press the screen display button again, S disappears, repeat the above steps, then enter D mode.

Adjustment: 1 Use the channel plus or channel subtraction key to adjust the content it debugs, 2 use the volume plus or minus key to adjust its size; 3 5T T T T T T25 and other menu keys can be used to switch the adjusted menu content options. Exit:

Applicable movement: 3T01 4T01 3T20 3T21 5T10 5T20 5T21 5T25 3T30 5T03

One, the bus enters.

Reduce the volume to the minimum, press and hold the volume down button of the keypad, and press the screen display key of the remote control at the same time to enter.

Second, the method of adjustment.

Channel plus or minus keys to select the option that needs to adjust the data, volume plus or minus keys to adjust the data or change the state.

Third, the bus exits.

Shut down to exit the bus.

Press and hold the "Volume Down" button until the "00" state, and at the same time press the on-screen display key of the remote control to enter Exit: Press the Clear button.

Have fun!

Let's write the errpom again, or change it.

This fault is not a bus data error, but a line correction circuit problem.

Here's how to enter:

Reduce the volume to the minimum (00), press and hold the volume (-) button of the machine, and press the (screen display key) on the remote control at the same time to enter"s"Mode. The top right corner of the screen appears"s"Character. Press the remote control"On-screen keys", the top right corner of the screen"s"The characters disappear and repeat step 2 to enter"d"mode, which will appear in the upper right corner of the screen"d"Character.

Press (Channel + - to select an item, Press (Volume + - to change parameters.

Press the standby button to exit"d"Mode.

Press the volume down button of the TV to 0, and press the screen display button on the remote control at the same time without letting go, and enter S mode. Press the on-screen key to exit.

Although the upstairs method is OK, but if you don't understand it or don't do it yourself, there are many adjustment items on the bus, and some of them can't be turned on once they are wrong! It is recommended to find a maintenance master!

1. Bus enters.

Press the - button on the remote control, then press the menu button, enter the number 978, and then press the menu to enter the bus (service state).

2. Adjustment mode.

In the service state, press the "Menu" button of the remote control once, and then press the "Channel Plus" button to enter the debugging menu. Press the channel plus or minus button to select the item to be adjusted, and press the volume plus or minus button to change the value or status of the selected item; Press the menu button to return to the entire project menu.

3. The bus exits.

Select the shipment item in the adjust menu to exit the bus.

The machine belongs to the 6D81 movement, which is marked by a barcode on the back of the case. The way to enter the bus is to press the - on the remote control and then press the menu button, enter the 978 number, and then press the menu to enter.

Try the last empty film.,If it doesn't work, you have to rewrite it.,Rewrite me this data.。