Epson L1800 double flash paper lamp and ink lamp. What is the fault

Remind you that you need to add ink before you can use it.

Summary. Hello, if the power light goes out and the ink lamp and the paperless lamp flash at the same time, it may be because there is a foreign object inside the printer that causes the print head to not return to its position. Please do the following:

1.If it is a new product, please make sure that the blue tape on the inside and outside of the product has been completely removed;

2.Turn off the printer, open the printer cover, and remove the paper or other obstructions from the paper tray channel.

3.Check that the cartridge hatch cover is tightly closed: Open the cartridge hatch cover, push the cartridge down until it locks into place (with a click), and close the cartridge hatch cover until it clicks.

4.Turn the printer back on and check if the indicator status is back to normal. If the fault persists, please contact an Epson Authorized Service Center for further testing of the printer.

You can browse the following ** to view the nearest service center tips: pay attention to the working environment temperature in winter, the working environment temperature of the printer is between 10-35 degrees, when the temperature is too low, the lubricant of the printer cart guide rail solidifies, it will also affect the movement of the cart, please place the printer at the normal temperature for 1 hour before use.

Epson printer power lamp out of paper lamp out of ink lamp what is the matter with the lamp shining at the same time.

Hello, I am Xiaoyan, an electronic consultant, and I am happy to answer for you Please later, I am working hard to sort out the answer for you, and I will reply to you within 5 minutes

Hello, if the power light goes out and the ink lamp and the paperless lamp flash at the same time, it may be because there is a foreign object inside the printer that causes the print head to not return to its position. Please do the following:1

If it is a new product, please make sure that the blue tape on the inside and outside of the product has been completely removed; 2.Turn off the power of the printer, open the printer cover, and remove the paper or other obstructions from the paper tray channel. 3.

Check that the cartridge hatch cover is tightly closed: Open the cartridge hatch cover, push the cartridge down until it locks into place (with a click), and close the cartridge hatch cover until it clicks4Turn the printer back on and check if the indicator status is back to normal.

If the fault persists, please contact an Epson Authorized Service Center for further testing of the printer. You can scroll the bridge to browse the following ** to view the nearest service center tips: pay attention to the working environment temperature in winter, the working environment temperature of the printer is between 10-35 degrees, when the temperature is too low, the lubricant of the printer cart guide rail solidifies, it will also affect the movement of the font, please place the printer at the normal temperature for 1 hour before use.

Summary. The two indicators of the Epson printer have been flashing, indicating that there is a fault, and the solution is as follows:

1. The ink light is on and the power light is flashing. The ink has been exhausted and the ink cartridge is not recognized.

Solution: Press the key to change the ink to replace, and the printer will generally show a prompt, and you can operate according to the prompt.

2. The double lights flash at the same time, mechanical failure, check whether there are sundries in the printer, and take out the sundries, most of them are jammed. If the internal parts of the printer are damaged or broken, then the parts need to be replaced.

Epson 270 printer ink lamp and paper shortage lamp flashing alternately what's going on.

Wait a minute, dear, the two indicators of the Epson printer have been flashing to indicate that there is a fault, and the solutions are as follows: 1. The ink light is on and the power light is flashing. The ink has been exhausted and the ink cartridge is not recognized.

Solution: Press the key to change the ink to replace, and the printer will appear prompted, and let Huila operate according to the prompt. 2. Twin lights flash when smooth and smooth, mechanical failure, check whether there are sundries in the printer, and it is good to get out of sundries before taking the blue, most of which are jammed.

If the internal parts of the printer are damaged or broken, then the parts need to be replaced.

3. Flashing of two lights at the same time may also be a failure of the motherboard or sensor, and the motherboard or the sensor next to the bend should be repaired. 4. After the printer is turned on, the ink car is not buried, and Qi Xiang can't print anything, but the paper and ink lights are flashing. Workaround:

Add some lubricating oil to the steel shaft and check if it is jammed. 5. EpsonR210, R230 paper feed and ink light flash at the same time.

Solution: The paper measuring sensor under the printer head, if it is changed to a continuous supply, check whether the length of the pipeline is appropriate, adjust the length of the pipeline, and make the length of the pipeline suitable when the car goes to the left and right, and the problem can be solved. 6. The paper feed light and ink light of the printer keep flashing alternately.

Solution: Clean up the waste base bridge ink and clean up the software.

Hello, under the focus of your expansion base, expand the data: there are the following faults in the fight: first, there is a paper jam in the printer; The second is that the shell of the printer is not installed in place; Third, the printer power cord is faulty or in poor contact; Fourth, there is a shortage of paper in the paper box of the printer; Fifth, the printer toner cartridge cannot be rotated.

After the above faults are eliminated, and the two indicators still flash, then there may be a fault of the printer's main circuit board.

<> remember Zanyou, thank you very much,

Hello dear! We are happy to answer your questions. The Epson printer power, paper, and ink lights are flashing at the same time, which usually indicates a problem with the printer.

This condition can be caused by the following reasons:1The printer cartridge or ink has run out, causing the ink deficit light to flicker.

2.The printer runs out of paper or gets stuck, causing the paper out light to flicker. 3.

Printer hardware failure, such as clogged printer head, mechanical transmission component failure, etc. In view of the above situation, you can try the following solutions:1

Check to see if the printer cartridge runs out, shield the beam and replace the cartridge with a new one or add ink. 2.Check whether the paper in the printer's tray is used up or stuck, and replenish or clean it in time.

3.After powering off the printer, check the printer for hardware failures and repair or replace accessories if necessary. If the above solutions cannot solve the problem, it is recommended to contact Epson after-sales service or professional and technical personnel for investigation and maintenance.