How to use cement for the construction of earthen wall 15

1. First of all, a layer of barbed wire should be hung on the adobe wall, and then cement mortar should be applied.

After the residual ash is cleaned up, you can apply the first putty, <> 2, wait for the first putty to dry thoroughly and then put on the second putty, and the second putty can be leveled and polished after the second putty is dry, generally two to three days after brushing the second putty, and then apply two times of milky white glue after grinding.

Wait for the milky gum to air dry naturally.

Because the texture of the earthen wall itself is relatively soft, if it is directly coated with cement on the wall, it is necessary to fall off, and if you want to make a cement wall, you should lay a layer of barbed wire on the earthen wall to make a leveling effect, and the cement is smoothed.

If the existing structure can be used, it is easier and wiser to implant reinforcement or add some new load-bearing members. If the structure of the earthen wall house itself is not very perfect, you can change part of the structure, for example, the wall is changed to beams or load-bearing columns, and there are many houses that have to use the way of wall to column or beam when renovating and reinforcing.

Due to the soft texture of the soil embryo, if you directly support the cement on the wall, it will definitely fall! Not to mention leveling!

If you want to achieve the leveling effect, you can lay a layer of barbed wire on the soil wall to carry out cement smoothing.

The title is not so clear. Paint it so you can thicken it in stages.

Summary. Pro, the method of building walls with clay:

Pro, the method of building walls with clay:

1. Determine the location of the wall, and then clean the base layer to ensure smoothness, and at the same time, sprinkle water on the bricks in advance to avoid affecting the stickiness of the mortar.

2. Adjust the sand file base slurry according to the proportion, and then carry out masonry with a layer of vertical mortar and a layer of bricks, pay attention to the bricks to be hammered with a rubber hammer, and use the hanging wire to assist the line to ensure that the wall is horizontal and vertical.

3. Measure with infrared detection equipment.

When building a wall, it is necessary to understand the climate and environment in advance, because the climate is too low, which will affect the strength of the cement mortar, which will affect the quality of the wall. In addition, outside the cave book, if the environment of the rock is very humid, it is not recommended to construct, otherwise the solidification speed will be slower after the mortar construction.

1. First of all, a layer of barbed wire should be hung on the adobe wall, and then cement mortar should be applied, and the remaining ash can be cleaned up with putty for the first time, <>

2. After the first putty is dry, then the second putty, the second putty can be leveled and polished after the putty is dried, generally two to three days after brushing the second acre of putty, after polishing, it needs to be smeared twice with milky white glue, and the milky white rubber can be naturally dried.

Kiss! Hello Tongran, I am happy to answer your <>

The method of plastering cement on the wall of the soil wall is as follows: 1. There will definitely be a lot of dust on the surface, so it must be cleaned up first, because it is uneven, so it is best to sprinkle some water, and then polish it. 2. Scrape the putty to the wall, scrape two layers, which can play the role of priming, so that you can easily wipe the cement on the wheel.

3. After the cement is adjusted, use a scraper to wipe it on the wall, and it must be wiped evenly. Second, the precautions for plastering cement on the soil wall 1, remember to clean the surface first, if it is more difficult to get, or there is a very serious protrusion, then it is recommended to use a small shovel, although the speed is relatively slow, but the effect of the treatment will be better, so that it can also lay a good foundation, and the later construction will be more convenient. 2. The earth wall has been exposed to the wind and sun for many years, so its surface is very dry, it is recommended to soak it with water before construction, so as to improve its water content, so that the cement can better stick to it.

3. It is best to scrape two layers of cement, in this case, the amount will definitely be larger, so you should remember to buy more cement, so as not to be insufficient during construction. If you don't have experience in this area, you can go to a professional construction team to help, which can save you a lot of trouble. Hope mine can help you <>

Do you have any other questions?

The best way is to brush the paint on the surface of the wall, and then apply the primer on the surface of the soil, which can dry the soil on the surface, alleviate the penetration and evaporation of water, and reduce the problems of mold, peeling, and cracking on the surface of the wall. In addition, the surface of the wall should be cleaned before painting the cement, as debris and dust on the soil surface can affect the color and quality of the cement. If there are already cracks in the wall, the cracks should be filled with professional tools before the cement is applied.

Further expansion and extension of the point of view is that it is also particularly important to choose the right time for construction. If you choose to carry out the construction in the rainy season or the winter season with high humidity and low temperature, the coloring effect of the wall surface is not easy to achieve. If conditions permit, it is best to choose spring and autumn for construction, when the air humidity is low, the temperature is suitable, and the cement is easy to dry and solidify.

In addition, before construction, the wall foundation should be treated, and the wall should be kept dry, and the soil that is too wet is easy to make the cement lose its flatness and adhesion after painting. After the surface treatment of the wall is completed, you should also carefully select the paint and primer products, and choose the right color and texture according to the actual needs.

Finally, it should be noted that painting earthen walls needs to be done by hand, and the process is more complex and requires skilled paint workers to operate. In the construction process, it is necessary to carefully grasp the thickness and uniformity of paint and primer application. This ensures effectiveness and longevity. <>

1. There will definitely be a lot of dust on the surface of the closed code, so you have to clean it up first, because it is uneven, so it is best to sprinkle some water, and then polish it.

2. Scrape the putty to the wall and scrape two layers, which can play the role of hitting the sedan car and getting the bottom, so that you can easily wipe the cement up.

3. After the cement is adjusted, use a scraper to wipe it on the wall, and the mold must be evenly smeared, if there is a gap, then it must be filled tightly.

Building a wall seems to be an extremely simple thing, just stack the bricks with cement mortar one by one, so that you can form a wall, but in the actual operation is not so simple, thenCement walls

1. Before construction, bricks and blocks should be watered and moistened two days in advance, do not pour on the spot, and it is strictly forbidden to dry bricks on the wall.

2. The mortar for masonry should be used with mixing, and the mortar should be used up within 3 hours after mixing. When the maximum temperature exceeds 30 during construction, the mortar should be used up within two hours. The hardened mortar shall not be stirred with water, and the overnight mortar shall not be used.

3. Generally, cement mortar mixed with various plasticizers will have the adverse effect of reducing the compressive strength of masonry, such as fine cement fineness and good liquid dismantling workability, it is recommended not to mix with various plasticizers; If it is to be used, the ratio should be determined experimentally.

4. When the paving method is used for masonry, the length of the paving shall not exceed 750mm. When the temperature exceeds 30 during construction, the length of the slurry shall not exceed 500mm.

5. Control the height of masonry every day not to exceed. If it rains continuously, the consistency of the mortar should be strictly controlled, and the daily masonry height should not be exceeded. At the end of the day or before the work stops on rainy days, the top surface of the wall should be covered with a skin of dry bricks or straw curtains and other materials to prevent the rain from washing the mortar.

6. The mortar should be mechanically stirred. Since the completion of feeding, the mixing time of cement mortar and cement mixed mortar shall not be less than 2 minutes, and the mixing time of admixture mortar shall not be less than 3 minutes.

7. The wall of the floor slab or roof that has not yet been constructed should be controlled according to the regulations when it encounters a strong wind of more than 7 (including 7) or more, so as to ensure that the wall is stable during the construction process and will not be blown down by the strong wind.

8. The sand used for masonry mortar is generally suitable for medium sand. The amount of sand should be strictly controlled in accordance with the design of the mortar, and the amount of sand should not be increased beyond the standard.

9. When the average temperature of the day and night of the construction site is lower than +5 or the minimum temperature is lower than -3, it can be treated as winter construction.

10. The mortar test block should be made, kept and maintained according to the specifications, and it is strictly forbidden to be exposed to the sun and rain, and the pressure should be sent beyond the time limit. When there is no standard maintenance room on site, it must be sent to the laboratory or quality inspection unit for standard maintenance.

The above is how to construct the cement wall for you? The full content of the precautions for the construction of cement masonry walls.