How do you debug the guzheng yourself, and how should you adjust the sound of the guzheng if it is i

Tuning with tuning, first tune to D key.

1. Open the cap of the headstock, clamp the clip to the plate above the string post, and turn all the notes into the key of D.

2. Guzheng tuning is to raise or lower the pitch of the strings. Guzheng tuning to D refers to the tone of the guzheng, which is determined by the tune.

3 Guzheng is divided into d, a, g, c, f, e, etc., and the tunes are different in different tones, and the tunes of various tones have different ways to play. Tune with the tuner. There are seven keys on one tuner, which are D, G, F, C, A, E, and B flat.

4. First adjust the tuner to D key, clamp the small clip on the piano board above the string post, wrench the glove on each string column to be tuned, tighten the low wrench forward (21 string direction), loosen the pitch to the direction of the body, adjust to the number corresponding to the string, and the pointer until the green light in the middle is on.

Buy a tuner, it is very easy to tune, if the tuner light is on the left, it means that the tone is low, tighten the strings, if it is on the right, it means that the pitch is loose. If the green light in the middle is on, it's just right. Hope it helps.

Buy a tuner, it's simpler to change the two tones, I personally think that when tuning, you still plug in the clip, the speed will be faster if there is less noise, and the sound is more accurate, don't forget to clip the clip on the piano yard.

If you are experienced and give a standard tone, you can adjust the tuner yourself, the tuner is automatically calibrated You play a pitch, the tuner arrow is to the right, then the string is loosened, the tone is low, the arrow is to the left, the string is tightened, the tuner is green, the tone is accurate.

It's best not to tune it yourself.、Each note has its own vibration and other frequencies.、Find a tuning teacher at the piano store.

How do you say to have a tuner ......It is that you have an absolute sense of tone, otherwise it is a ...... that is not in tune

Start tuning:

1. In the case of not loosening the strings, according to our label position, install the zither code one by one.

2. Open the tuning box of the guzheng, you will see a row of 21 metal string nails inside, clamp the clip of the pickup on the metal string nail wrapped by the 21st string (the thickest string), it does not matter where it is clamped, it only needs to be connected to the guzheng.

In our experience, clips work best when clamped on a pin, and when tuning the 21st string, the clip can be clamped onto other pins.

3. Select the eighth string: by continuously pressing the up and down buttons, the number in the middle of the dashboard is displayed as 8A (the following letters represent the sound name, which is automatically generated and does not need to be set).

4. Use your fingers to pluck the position of the strings from the No. 8 Zheng yard to the middle of Yueshan, the strength is not too large, the pointer will swing left and right on the instrument, when the pointer points to the 0 position in the middle of the dashboard, the sound will be accurate when the green light is displayed.

On the left side of the LCD there is a number of -50, on the right there is a number of +50, and in the middle there is a 0, and when we pluck the strings, the pointer switches between the dashboard, and the pointer points between 0 and -50.

The red light is on, indicating that the tone is low, when the pointer is between 0 and +50, the red light is on, indicating that the tone is high, and when the pointer is in the middle of the 0 position, the green light is on, indicating that the tone is standard.

After the string is accurately debugged, start to debug the 9th string, press the up button on the main unit, and it will be displayed as 9f (the following letter represents the sound name, represents the ascending sign, and b is automatically generated by the falling sign, no need to set it). Follow the method of string 8, and so on.

Take it back and ask the boss to help you adjust it. It's really not okay to ask your ** teacher to help you adjust. Otherwise, the school's ** teacher will do the same.

Turn on the power of the tuner, press the special button for the guzheng, select the tuning you want (dcgfab), play the strings, the red light will move to the right, the right will move to the left, and the green light in the middle will be just right.

1. First, take out the tuner and tuner. Clamp the tuner's clip to the piano, then press and hold the red button, turn on the tuner and press the M T button to adjust to the guzheng mode, and change the automatic mode to manual mode. Know-it-all.

2. Set the key to D. The data displayed on the tuner is 21 for the 21st string. The strings are counted from the thinnest to the 1st string and the thickest to the 21st string.

3. Start tuning from 8 strings. I set the number of the tuner to 8, and for beginners, it is easy to tear the string if I use a little bit from the first string force. Insert the tuning stick into the spool of the 8th string, hold the tuning stick in your right hand and pluck the strings with your left hand.

4. Pay attention to the pointer on the tuner display, and adjust the pointer to the middle position. Pluck the strings, the pointer does not hit the middle crack imitation position, indicating that the hardness of the strings is low, and the tuning stick is twisted forward a little. Twist and pluck the strings until the pointer hits the middle position.

5. If the velocity pointer hits the right, it means that the strings are too hard, and you need to twist the tuning stick back a little. The closer the pointer is to the middle 0, the softer the tuner you need to twist the tuner.

Once the strings are tuned, then they are tuned from 9 to 21 and from 7 to 1. The method is equivalent to tuning as 8 strings, and after all the strings are tuned, pluck them one by one from 1 string to 21 strings.

1. Tighten the strings first, whether it is a new piano or a period of time, the strings will generally be loose.

2. The purpose of tightening the strings is to make the strings sound higher than the standard pitch, and when they are tuned in the future, they are loosened in tune, so that the strings are not easy to break.

3. After the string is tightened, the horse should be loaded, and the distance between the No. 1 horse is about 15 cm, and you can feel that the string is very tight.

4. Put all the horses in turn according to the distance, and then adjust the spacing between the horses and the strings, which must be even.

5. Use the equipment to thicken or close the volume of each string in turn, which is generally higher than the standard pitch, because the crack head of the open stool has tightened the strings, just adjust and loosen them one by one according to the equipment display.