How much is 1 5mm thick APF 3000 pressure sensitive reactive polymer waterproofing membrane per squa

You can Niudun XCMG's official website, which has ** and product display, it is recommended that you choose Niudun XCMG's waterproof products and standardized construction team, Niudun XCMG is the best quality waterproof listed company in China.

Thick APF-3000 pressure-sensitive reactive self-adhesive polymer waterproofing membrane is a waterproof membrane that can be formed by a composite of virgin polyethylene synthetic polymer material as the main material and composite fabric membrane as the protective or reinforcing layer. The rough surface of the non-woven fabric should be bonded with a variety of materials, and the construction is simple, as long as there is no open water on the base surface, it can be constructed; High tensile strength, strong shear resistance, solid bonding with cement materials or concrete of the main body of the project, can withstand the tangential shear force, normal tensile force, lateral peeling force, mainly used in underground, tunnels, roads and bridges, roofs and lining projects and other waterproof and seepage-proof.

There are three specifications for thickness.

Specification: thick, thick, thick Weight: 45kg

Others: single-sided, double-sided, type I, type II, wet paving, pre-paving, wet paving, pre-paving, pre-paving.

Second, the construction method.

1. The base surface must be firm, clean, flat, moist, no oil stain, no floating ash; There are defects such as pores and cracks on the base surface.

2. Use brushes and rollers to evenly coat the slurry on the treated substrate, and paint two or more layers according to the use environment and performance requirements; When the first layer is not dry and sticky, the second layer can be painted, the direction of the two layers should not be perpendicular to each other, if more than 24 hours, or the coating has been cured, when brushing on it for the second time, it must be re-moistened with water or sprayed on the surface.

3. After the slurry construction is completed, the coating needs to be protected before it is completely dried and solidified, such as prohibiting the master, rain erosion, exposure, damage to sharp objects, etc.

Fourth, product features.

1. The material is flexible, which can cover cracks smaller than mm, as well as resist slight vibrations.

2. The product has good air permeability and high bonding strength.

The waterproofing membrane will be different because of different material specifications and different brands.

Now the top ten domestic waterproofing membranes are:

1.Gulai (Changsha manufacturer for more than ten years).

2.Tibebel (a professional manufacturer specializing in new environmental protection and waterproofing in Guangzhou) 3Yuegang (a building materials start-up enterprise in Shanghai).

4.Xiluojia (Hunan emerging waterproof building materials manufacturer).

5.JCDecaux (a wholly-owned enterprise designed by the French PAREX Group in China) 6Sika (Sika (China) **** entered the Chinese mainland market in 1993) 7Jiacai (a well-known building materials manufacturer in Hunan).

8.Yuhong (Beijing Yuhong Waterproof mainly promotes waterproof coating products company) 9Mapei (founded in Milan in 1937 by the Mapei Group) 10Gushuibao (a well-known building materials manufacturer in Hunan).

APF series waterproofing membrane is a patented product independently developed by Guangdong Keshun Chemical Industry, which with its unique bonding mechanism, with wet paving pre-paved construction method, the waterproofing membrane, polymer cement bonding and building structure layer (or base) are firmly bonded together to achieve permanent full bonding, forming a continuous and complete waterproof sealing system with no gap between rigidity and flexibility.

Since 2004, it has passed the evaluation of scientific and technological achievements of the Ministry of Construction, and has been continuously rated as "2005 and 2007 National Construction Industry Scientific and Technological Achievements Promotion Project" by the Ministry of Construction. It has been widely used in many large-scale engineering projects, with excellent performance and stable quality, reaching the international leading level.

Waterproof, better brands like Oriental Yuhong and Ouxi Jianke all involve flexible waterproofing.

You can Niu Dun XCMG's official website, which has ** and product display, it is recommended that you choose Hongniu XCMG's waterproof products and standardized construction team, Niu Dun XCMG is the best quality waterproof listed company in China.

Thick APF-3000 pressure-sensitive reactive composite self-adhesive polymer waterproofing membrane.

1. Product Overview.

Thick APF-3000 pressure-sensitive reactive composite self-adhesive polymer waterproofing membrane is a reactive waterproof coating composed of main agent (component A) and curing agent (component B). Component A is made by reaction of high-end amino polyether, liquid ammonia diffusion link agent and acid lipid. Components A and B form a high-strength coating film after curing reaction.

There are three specifications for thickness.

Specification: thick, thick, thick.

Weight: 45kg

Others: single-sided, double-sided, type I, type II, wet paving, pre-paving, wet paving, pre-paving, pre-paving.

Second, product features.

1. The product has high solid content, high tensile strength and stable performance.

2. Liquid construction, curing at room temperature, easy operation and short construction period.

3. It can be constructed on a variety of base surfaces with a moisture content of <10%.

4. It is widely used in the waterproofing of municipal highway bridge decks, road surfaces, high-speed rail bridge decks and cable trenches; It is also suitable for waterproofing of parking lots, airport runways and other projects. Executive standard: Ministry of Railways Science and Technology Base [2007]-56.

3. Construction phenomenon of thick APF-3000 pressure-sensitive reactive composite self-adhesive polymer waterproofing membrane.

1. Grassroots requirements: The grassroots roof should be free of dust and impurities, and there should be no open water, and construction in the rain is strictly prohibited.

2. The main coating agent (component A) and curing agent (component B) must be prepared in a ratio of 1:2, and the weighing error of each component is 20%.

3. It is advisable to use spraying equipment to evenly coat the paint on the surface of the base layer, and the equipment should have the functions of self-use measurement, mixing and heating, and the discharge temperature is 60-80 °C after heating

4. The metal sawtooth plate can also be used to manually and evenly coat the surface of the base layer. When the paint is prepared by manual painting, the liquid is poured into the container in the order of "main agent first, then curing agent", and stirred thoroughly to make it mix evenly. Stirring time 3-5min.

5. Water shall not be added when stirring, and mechanical stirring must be used, and the speed of the agitator should be 200-300 rpm.

6. When brushing, it should be divided into multiple times according to the thickness requirements to prevent bubbles from being stored in the painting. For the first time, the flat plate is used to scrape a layer of coating film with a thickness of about the base surface, and the time of each coating and scraping is subject to the surface dryness.

7. Use brushes or rollers to paint vertical parts such as retaining walls and vertical walls first, and paint flat parts behind.

8. The configured paint shadow will be used up within 20 minutes, and it can be used with it.

9. Frost, rain and exposure must be prevented within 4 hours after spraying or within 12 hours after painting.

10. After the waterproof layer is completely dry, the protective layer can be poured.

11. The ambient temperature of the waterproof layer shall not be lower than 5 °C.

Niu Dun XCMG.

1. The answer to the performance of APF-3000 pressure-sensitive reactive self-adhesive polymer waterproofing membrane.

If it is a national standard, and if it is well constructed, then it can generally have a life span of 20-30 years, which is also hypothetical. If it's an enterprise standard, then it's hard to say, and it usually won't be too long. For example, the buffalo master is very good.

2. About the strength of APF-3000 pressure-sensitive reactive self-adhesive polymer waterproofing membrane.

The general national standard, the quality is very good, this don't worry, the enterprise standard is difficult to say, if you only pursue the first, then there is no way.

3. About this piece.

**This piece is difficult to say, some are cheap, some are more expensive, such as buffalo famous workers, this one's products are good, **discount, quality assurance. If it helps you, thank you.

- Buffalo Famous Craftsman.

1.Substrate pretreatment:

Remove loose structure, oil and dust and other debris from the base layer. It can be brushed with a wire brush and rinsed with a high-pressure water gun. The effect is better with the sandblasting removal process. In case of yin and yang angles, it should be made into a transitional arc.

2 How to use:

After the base layer is treated, fully moisten with water (but there should be no open water, if you use the liquid of emulsion plus 5 times water as the base wetting agent, you will receive better results). Then use a scraper or trowel to scrape or wipe the waterproofing agent onto the base surface. After hardening (hand pressure does not leave fingerprints), scrape or wipe a second pass in the direction of the cross, and the thickness of each pass is mm mm.

If the interval between the two passes of construction is too long, the surface of the previous pass should be moistened with water before the second construction. After the last scraping is completed, a 48-hour wet curing is performed.

Paint to choose cost-effective, relatively speaking, Guangzhou's brand cost performance is good! However, the waterproof coating of bass is the most cost-effective.