What should I do if the 008 frequent list is empty?

Huhutong shows 008 is generally a signal problem, turn it off and open it again, if it is still like this after reopening, use the search channel in the menu, if the search channel still can't be searched, find the unit that installs Huhutong for you to come and repair it.

Hello Huhutong shows that the 008 channel is empty and the processing situation is as follows: 1. Connect the line first, press the information button, and the signal strength and signal quality bar appear in the noise (the signal strength is about 50 70 after the line is connected); 2. Adjust the elevation angle, adjust the signal strength to the highest, and then adjust the azimuth angle. Therefore, slowly turn the pot from due south to west, and the signal quality appears and is adjusted to the highest; 3. Finally, you can turn the high-frequency head a little more, adjust the signal to the highest, and see if all the stations are liquid, and fix it.

What should I do if the 008 frequent list is empty?

Huhutong shows that the 008 frequent list is empty What to do Hello dear, Solution: 1. Connect the line first, press the information key, and check the signal strength and signal quality bar (the signal strength is about 50 70 after the line is connected); 2. Adjust the elevation angle, adjust the signal strength to the highest, and then adjust the azimuth angle. Therefore, slowly turn the pot from due south to west, and the signal quality appears and is adjusted to the highest; 3. After the most defeat and early infiltration, you can turn the high-frequency head a little more, adjust the signal to the highest, and see if all the stations are closed, and fix it.

Summary. Hello, 1.First of all, check whether the line is damaged, whether there is a connection failure, and the signal strength and signal quality bar 2

Adjust the elevation angle, adjust the signal strength to the highest, and then adjust the azimuth angle, Zhongjiu is generally about 30 degrees south-west in China. Therefore, slowly turn the pot from due south to west, and the signal quality appears and is adjusted to the highest; 3.

Finally, you can turn the high-frequency head a little more, adjust the signal quality to the highest, and see if all the stations are closed.

What is the reason why the 008 channel list is empty?

Hello, Huhutong shows that the 008 channel list is empty, check whether the signal connector has loose reed keys. The finch was sure that the high-frequency head was erected and the receiver was not damaged. The signal is unstable.

Point the set-top box at the satellite to view. If everything is not asked, it means that there is an official problem with the 008 channel. It is advisable to wait for a while, or restart.

The signal strength is 89% and the signal quality is 45%.

Adjust the elevation angle, adjust the signal strength to the highest, and then adjust the azimuth angle.

The signal strength is 89%, the quality is 45%, and the TV shows that channel 008 is empty.

Hello, 1.First of all, check whether the line stove is damaged, whether there is a connection failure of the family, and the signal strength and signal quality bar 2 appear when the information key is pressedAdjust the elevation angle, adjust the signal strength to the highest, and then adjust the azimuth angle, Zhongjiu is generally about 30 degrees in the south-west hidden chain in China.

Therefore, slowly turn the pot from due south to west, and the signal quality appears and is adjusted to the highest; 3.Finally, you can turn the high-frequency head a little more, adjust the signal quality to the highest, and see if all the stations are closed.

Dear,Hello,I'm glad to answer for you,The reason why the 008 channel list is empty is because this is when there is no signal quality, the automatic search station is dry,There is no signal quality, and the station cannot be searched,The channel list will be displayed as empty,Call up the signal quality first,Then the automatic search will be introduced。 If Duan Qi appears after booting up, "T08 channel list is empty, please reboot", don't worry, this is caused by the live broadcast center updating the boot screen. Workaround:

1. Turn on the machine without connecting the signal line, after the machine starts, connect the signal and hold the line like a line, and press the "F1" button on the remote control to automatically search for it. 2. Turn on the machine without connecting the signal line, after the machine starts, the installation interface will pop up and there will be no signal, plug in the signal cable, and install it step by step.