What is the reason for the low volume of the Apple 6S mobile phone and how to solve it?

iphone6s phone volume is small because of the wrong setting.

iPhone6S can solve the problem of low sound by pressing and holding the [Volume Key] on the side of the fuselage and turning on [**Noise Cancellation] in [Settings] [General].

How it works: We need to find out if the reason for the low sound is because the call volume of the phone is too low. Press the volume "+" button when dialing ** with your mobile phone to increase the volume of the call.

Then whether it's a problem with your microphone, like your microphone is blocked by a phone case.

If none of the above is the reason for your low call, go to the settings page.

Then find the Accessibility option in your phone's settings and tap on it.

Once you're in accessibility, find the Noise Cancellation option. Then make sure that this check box is successful.

In the end, if it can't solve the problem, it can be roughly determined that it is a hardware problem with the phone. Please take it to the Apple after-sales service center for maintenance.

Although the sound of the Apple phone is small, if there is still sound, it can be ruled out that the mobile phone audio is switched to headphone mode.

Restart the iPhone and confirm that the volume of the iPhone has been adjusted to the maximum to see if the sound of the iPhone is still very small.

If this is still the case, the basic judgment is that the Apple phone is low due to hardware problems.

It is recommended to go to an Apple after-sales service center.

1. You can check whether the volume is up, you can press the volume + tone key on the screen to try.

2. You can check whether the phone is on silent mode, if there is no sound when the call comes in silent mode.

3. If the speaker problem is a hardware failure, then you need to find a local Apple after-sales inspection machine.

1. First of all, make sure that you are not turning up the loud voice, press the volume plus button to increase the volume.

2. Then see if the microphone is blocked by the phone case.

3. If none of the above is the reason for your low volume, then enter the settings page.

4. First of all, open the phone's settings, general, and accessibility functions.

5. In the next interface, turn on mono audio and noise cancellation.

6. Also open the phone's settings first, **, find the equalizer, and change the mode to late night.

7. If it is not the hardware of the mobile phone itself, then it may be caused by external reasons that the sound of the mobile phone is low, choose a small brush and alcohol utensils.

8. Find the speaker of the mobile phone, you will find that this part of the mobile phone is stuffed with dust, use a brush to dip a little alcohol to clean off the dust.

9. If there is no sound when playing **, then it is possible that the volume of the receiver or speaker is too low, just turn them up.

10. It is also possible that the receiver of the mobile phone is broken, if this is the reason, then it is best to take the mobile phone to a repair shop for repair.

You can try to take a small brush dipped in a little alcohol (not too much) and brush the speaker a few times, and after brushing the dust off, see if the volume becomes louder.

According to the instruction manual, if you can't adjust it yourself, then take it to the after-sales service network and let the professionals test it.

The solution to the low sound of Apple 6S calls is as follows.

1. On the left side of the front of the iPhone 6S body, there are two plus or minus buttons that can control the volume of the sound, through which you can adjust the volume of the sound.

2. If you want to adjust the volume of the call sound, please feel free to open a ** to make the phone on the call.

3. Press the volume up or down button of your iPhone6S during a call to adjust the sound volume to a suitable level, and the volume adjustment icon will also appear on the screen.

Extended Information: The iPhone 6S is a smartphone released by Apple in 2015. On September 10, 2015, Beijing time, Apple Inc. released the iPhone 6S in gold, silver, space gray, and rose gold.

The screen is made of high-strength ION-X glass, the processor is Apple A9 processor, the CPU performance is 70% higher than the A8, the graphics performance is 90% higher, the rear camera is 12 million pixels, and the front camera is 5 million pixels. The camera focuses more accurately, and the CMOS uses "deep slot isolation" technology for noise reduction, which supports 4K** recording. In terms of data connectivity, it supports LTE networks in 23 frequency bands and WiFi connections with twice the speed.

On September 25, 2015, it was released simultaneously in Chinese mainland and overseas. On September 8, 2015, Beijing time, the iPhone 6S 6Splus 32GB version was released at Apple's 2016 autumn new product launch conference.

Tools Required: iPhone 6S phone.

Steps:

1. Unlock your iPhone 6S to the [Home Screen] state.

2. Press and hold the [Volume Key] on the side of the iPhone 6S to adjust the volume to the maximum.

3. After the volume is adjusted, return to the main page and open [Settings].

4. After entering [Settings], find and turn on the [General] function.

5. Select Accessibility in the General menu bar.

6. In the specific settings page of [Accessibility], select to enable the [**Noise Cancellation] function.

7. After successfully turning on the [**Noise Cancellation] function, select [Channel Balance].

8. Drag the [Channel Balance] button to the middle to ensure the balance of the left and right channels, and then you can solve the problem of low call sound on iPhone 6S.

The steps are as follows:

Step 1: Make sure the call volume is maxed out during the call and see if it can be solved.

Step 2: If the first step can't be solved, you can plug in Apple's original headset to talk during the call, and then unplug it to see if it can solve the problem of low voice in the cave. If that doesn't work, see step 3.

Step 3: iPhone6 PlusPlease refer to the following steps to set up: open the opening bend - general - accessibility function, find ** noise removal, after turning off, if the sound is loud, the source is the effect of noise reduction.