The difference between exposed full color luminous words and colorful luminous words

1. Full color, the same picture has a variety of colors, can change the pattern, and the color is changeable.

2. Colorful, can only change one color at a time, can not appear several colors at the same time, can not change suddenly, can only change color.

Judging from the appearance, colorful and full-color full-color lights have a built-in piece of black smart IC, and the aperture of the colorful lights without IC is 12mm

Full-color lights need to be able to not only do words but also can do LED screens, it can achieve flowing water, chasing, text scanning, images and animations and other effects, as long as the LED display can produce the effect of full-color lights can be displayed, and colorful lights can only appear a few simple effects metaphorically said at the same time jump, gradient, etc.

Let's put it in layman's terms.

1. Judging from the appearance, colorful and full-color full-color lamps have a built-in black smart IC Colorful lamps without IC aperture are 12mm

2. The full-color lights need to be able to not only do words but also to do LED screens, which can achieve flowing water, chasing, text scanning, images and animations and other effects, as long as the LED display can produce the effect of full-color lights can be displayed, and colorful lights can only appear a few simple effects metaphorically said at the same time jumping, gradients, etc.

Manufacturer = 2602 direct sales 3375 welcome 64 inquiry.

First, the reference is different.

1. LED full color: red, green and blue light-emitting tubes are used, and each tube has 256 levels of gray to form 16,777,216 colors.

2. LED colorful: make full use of the energy-saving and environmental protection characteristics of LED light-emitting diodes to produce colorful signboards.

Second, the characteristics are different.

1. LED full color: The latest LED technology and control technology are used to make the full-color LED display display lower, more stable performance, lower power consumption, higher unit resolution, more realistic and rich colors, fewer electronic components when forming the system, and reduce the failure rate.

2. LED colorful: the spacing is determined according to the height of the installation of the signboard system and the production cost, the LED center spacing is: 10-30 mm, the smaller the spacing, the better the effect, the higher the cost.

Third, the use is different.

1. LED full color: the scanning field frequency is more than 240Hz, the picture is stable and flicker-free, in practical applications, the display screen is shot with a camera, the image observed in the camera is very clear, there is no synchronous scroll bar, if there is a TV broadcast on the spot, the display screen will not affect the picture quality of the broadcast picture.

2. LED colorful: widely used in the advertising industry.

1. Single color.

LED lamps can only emit one type of light. Compare.

BAI is like a variety of single-color LED lights. At present, there are seven kinds of LED monochrome lights, which are as follows:

Red blue DAO

Green-red + blue = purple.

Red + Green = Yellow.

Blue + Green = Cyan.

Red + Green + Blue = White.

2. Colorful. Red, green, and blue are all working in a fully bright state, which is colorful. It means that an LED light can emit seven kinds of light: red, green, blue, yellow, cyan, purple and white. However, it should be noted that these seven kinds of light must be emitted in the full brightness of the three primary colors, and the mixed light (yellow, cyan, violet, and white) must also be mixed in the full brightness of the three primary colors.

3. Full color. If the three primary colors of red, green and blue are brightened or mixed separately according to different brightness (not full brightness), a lot of colors will be produced. Like red, light red. Moreover, according to the brightness level of each primary color (also called grayscale, some full-color controllers have a grayscale of 16 levels, and some have 255 levels), different colors of light will be produced after mixing.

Mathematically, if the grayscale of the full-color controller is 255, then theoretically it can produce 255*255*255=16581375 colors. The resulting colors are more natural. But it is only close to nature, and it can never reach the color of nature, because the color of nature is innumerable.

Full color is the same color display effect as the computer screen, colorful is not full color, each part can use different colors.

RGB is available in full color and multicolor.

Colorful, there must be seven basic colors, which are red, green, blue, dao yellow, purple, blue, and white.

Red-green = yellow, red-blue = purple, green-blue = cyan, red-green-blue = white.

The other colors are transitional colors.

Full color: The same picture has a variety of colors, and the pattern can be changed, and the color is changeable.

Colorful: It can only change one color at a time, and several colors cannot appear at the same time, nor can it change suddenly, only color.

In the color of LED strip light, PP is milky white, white, transparent or white.

Colorful, copy is natural.

Seven colors of the world.

LED full color is a color light source composed of three primary colors.

The difference between them is: LED is a color light source composed of three primary colors, and the components in the spectrum are only the spectral components of red, yellow and blue light; The colorful is a light source composed of 7 kinds of brown, red, orange, yellow, green, blue and violet in nature, so its spectral composition has 7 spectral components.

That's the biggest difference from the difference.

Full color has gray levels.

Colorful without gray scale.

LED colorful and full color are essentially the same: LED colorful refers to the LED that can emit seven colors; LED full color refers to LEDs that can emit more than three colors, which of course includes colorful colors. Therefore, LED colorful can also be called LED full color, but LED full color is not necessarily LED colorful.

Exposed to glow words.

Compared with the inner luminous word (taking the blister self-light word as an example), it has a higher cost performance. After analysis, it has the following characteristics:

1. Exposed luminous words Because the lamp is exposed, it is not affected by other things, therefore, the brightness is higher than that of blister luminous words.

2. The cost is relatively low, and the conventional blister word is also known as the light box word, which is composed of two sets of words and the lamp inside. Therefore, the cost is relatively high. The LED external light-emitting word can be made of iron sheet or stainless steel to make a set of words, and then through the perforation of the lamp, the cost is saved.

3. Uniform luminescence, due to the limitation of the size of the stroke, there is no way for the strokes that the ordinary module cannot fit, so there will be a place where the brightness of the word is different. The external light-emitting word is installed with a single LED lamp, therefore, the LED out-light-emitting word does not have this phenomenon (unless the lamp is broken).

4. Easy to maintain, the lamp beads with exposed words can be removed from the outside, and the words need to be removed from the blister light box. For high-rise buildings, it takes a lot of money to disassemble the word and repair it and install it back, such as building a shelf or renting a hanging basket to do it.

If you want to do glowing words, you can contact.

The whole body light-emitting word refers to the LED light-emitting word, and the boundless light-emitting word refers to the aluminum edge light-emitting word, and the main differences between the two are as follows

First, the principle is different.

1. LED luminous word: a luminous font made by using a light-emitting diode as a light source.

2. Aluminum edge luminous word: the luminous font that uses aluminum edge strip around the edge to make the resin word present in another posture.

Second, the characteristics are different.

1. LED light-emitting words: the cost is relatively low, the light is uniform, easy to maintain, and it is not limited by the color of the word.

2. Aluminum edge luminous words: beautiful and generous appearance, greatly increase the weather resistance of luminous words, strong and durable, energy-saving and environmentally friendly, 12V has no harm to the human body, and ultra-power-saving, it is a cross-era product that replaces traditional luminous words.

Third, the materials are different.

1. LED light-emitting word: light-emitting diode is used.

2. Aluminum edge luminous word: aluminum edge strip is used to circumfer.

The leakage luminous word is to perforate the metal plate or acrylic plate, and install a single waterproof lamp bead through the hole, and the lamp bead is leaky;

The blister luminous word is a metal bottom box + blister panel; The blister panel is heated by translucent acrylic, and is made by suction and pressure through the word mold, which has a convex three-dimensional effect, the light source is installed in the bottom box, and the lamp is built-in; The light source is transmitted from the front through the blister panel.

The flat luminous word is the bottom box + panel, and the light is built-in; The light source is transmitted through the acrylic panel from the front and side.

1. The exposed luminous words are iron words, stainless steel words, aluminum words, titanium words, and the surface of the titanium words are perforated with LED single waterproof light strings, and the production materials of the exposed luminous words are commonly used, acrylic sheet, galvanized sheet, stainless steel, titanium plate;

2. The blister luminous word is composed of three parts: acrylic blister panel, luminous word box, and luminous word light source, the plate material is mostly used with the uniform thickness of the plate, the plate surface is flat and smooth, the light transmission is uniform, the color reproduction is good, the weather resistance is good, the impact resistance is good, and it is not easy to embrittle and fade;

3. The surface of the flat light-emitting word is generally flat, and the acrylic colored panel is used to encapsulate, and the word shell is made of iron sheet or stainless steel to convert into the shape of the word, and the LED light-emitting module is installed inside the word, which is a box word that will emit light;

Plane luminous characters have unique strength, high wear resistance, superior anti-corrosion performance and not easy to rust and other excellent characteristics, so they are widely used in chemical industry, food machinery, mechanical and electrical industry, environmental protection industry, household appliances industry and home decoration, giving people a gorgeous and noble feeling.

The installation method is different depending on the product used. It comes out with a different effect. The exposed lamp is the lamp through the board, which will be brighter, and the blister word is the lamp that shines through the plastic plane. The flat luminous word is to install the lamp in the word, which has a three-dimensional effect.

There are many kinds, the exposed luminous words are basically waterproof and exposed light sources, such as barber shops are now used in many places, that is, perforated lights, blister luminous words have a layer of acrylic blister board outside, such as McDonald's KFC's outdoor signboard glows at night, and the flat luminous word should be LED display word, with monochrome and full color.

Lixin Optoelectronics is a little brighter!

Benefits: Good light transmittance, relatively simple production skills, and short cycle.

Disadvantages: The waterproof function is not excellent, not robust, not very suitable for large characters, engineering.

2. LED acrylic blister luminous words: (the panel is blister, the shell is galvanized sheet baking paint, the plasma cutting skill is selected, the baking paint is divided into imported paint, domestic paint, spraying, material thickness, light source piranha, etc., equipment and other elements are involved in the cost of concave and convex).

Benefits: good light transmittance, messy production, long cycle, good robust function, suitable for large characters, engineering.

3. LED resin luminous word (liquid luminous word) :( panel and shell are cast with unsaturated resin, and the light source can be piranha and straw hat, with good sealing, and the color can be distributed according to needs

Black hair white, black hair red, gold, silver, etc.).

Benefits: good light transmittance, messy production, long cycle, good robust function, good waterproof function, and long life.

4. LED exposure luminous words: the lamp hole of the exposed word is laser cutting, plasma cutting, the shell material is galvanized sheet, aluminum plate, stainless steel plate, baking paint, spray material thickness, skill optional, light source has a variety of specifications to choose from, the lamp placement distance density is not the same, the difficulty of the equipment and other elements affect the overall cost of the word).

Benefits: good waterproofness, high brightness, long visual distance, energy saving, safety, words are not bound by size, easy maintenance, repair, long life and other characteristics, suitable for large characters, engineering.

Disadvantages: The paint will fall and rust after a long time, and you can choose spraying skills, but the cost is higher.

5. LED colorful luminous words: (the panel is made of acrylic flat plate or blister, the shell is made of acrylic circumference, galvanized sheet, aluminum plate, stainless steel plate baking paint or spraying plastic, and the straw hat colorful luminous module is selected, and the group control can change seven different colors from one color to another).

6. LED full-color luminous words: (full-color luminous words are divided into: LED acrylic inner luminous full-color luminous words and LED exposed full-color luminous words.)

Full color is point-controlled, which can be full color effects such as flowing water, chasing, jumping, sudden change, scanning, scattering, curtain pulling, and opening.

7. Extra skills luminous words: black hair and white luminous words: (The skills of making black hair and white are: resin pouring and acrylic black hair whiteboard, both of which are available on the market, and the pouring effect will be better.)