i9308 What should I do if the screen of my Samsung phone is fixed???

Updated on technology 2024-03-20
12 answers
  1. Anonymous users2024-02-07

    1.Charge with a cable charge for a while and try to turn it on, or replace a phone battery of the same model.

    2.Take out the SIM card and SD card at the same time and try to power on again.

    3.If the issue persists, it may also be related to third-party software that you have installed yourself**. When you see the "Samsung" logo icon when you reboot the device, press and hold the back button until the word "Safe Mode" appears in the lower left corner of the screen, and then let go, enter the settings and uninstall some self-** apps, then turn off the computer and reboot it.

    4.If you still can't turn on the computer after uninstalling the app, you can follow the above methods to enter the "safe mode" and back up your data (for example: contacts, text messages, **, etc.) and restore the factory settings.

    5.If you can't enter the safe mode and can't turn it on, it is recommended that you bring the mobile phone three packs certificate and send the mobile phone to the nearest Samsung service center for testing and maintenance

  2. Anonymous users2024-02-06

    The occurrence of Samsung mobile phone screen fixing failure will be affected by many factors. For example, third-party software conflicts, viruses, excessive cache usage, hardware and other problems will cause crashes.

    Workaround:1If it can't be turned off, it is recommended to press and hold the power button for more than 10 seconds to try, turn it off, and try to restart it.

    2.If an external SD card is inserted into the body, take it out for testing. Ruled out the poor performance of the SD card.

    3.Test the third-party software that was operated before the crash to rule out the crash caused by the incompatibility of the third-party software with the tablet.

    4.Back up your phone's important data and restore it to factory settings.

  3. Anonymous users2024-02-05

    Reboot or flash the machine to solve it.

  4. Anonymous users2024-02-04

    Based on your description, it is recommended to follow these steps:

    1.If the phone can be turned on, it may be due to the compatibility problem of your ** third-party software, it is recommended that you uninstall the incompatible software to try. If the above problems still occur after the operation, it is recommended to factory reset the phone (Settings - Privacy - Factory Reset), and before resetting the factory settings, please back up the important data stored on the phone in advance, such as:

    2.If the phone does not turn on, it is recommended to send the phone to a local Samsung service center for an engineer to help further check the phone. For information on Samsung's designated authorized service centers, please visit the following ** to view:

    I hope the above reply will be helpful to you. Thank you.

  5. Anonymous users2024-02-03

    Hello dear Samsung users:

    Comments, suggestions, complaints, please click:

  6. Anonymous users2024-02-02

    According to your description, a system or hardware failure could be caused in this case. It is recommended that you:

    1.Turn the computer back on and off.

    2.If the phone case has a protective case, take it off and test it.

    3.Back up your phone data (**book, SMS, multi** files, etc.), restore factory settings (go to phone settings - reset privacy - private - factory reset).

    If the problem persists, in order to understand and solve the problem of your mobile phone, it is recommended that you send your mobile phone to the nearest Samsung service center for testing, and the service center will determine the specific problem and accessories of your mobile phone according to the test results.

  7. Anonymous users2024-02-01

    How your phone unlocks the screen lock has to do with how your phone sets up the screen lock:

    1.Sliding Lock: Swipe your finger across the screen to unlock it.

    2.Pattern Lock: Unlock by drawing the correct pattern on the screen.

    3.Password PIN Lock: Enter the password you have set, and then tap it"ok"or"Done"to unlock it.

    Some machines also support signature, fingerprint, or directional locks.

    1.Signature Lock: Unlock by drawing the correct signature on the screen.

    2.Fingerprint Lock: Unlock with your fingerprint swipe or press at the bottom of the screen, or enter an alternate password to unlock it.

    3.Orientation Lock: Unlock the screen with a sequence of swipes (up, down, left, or right) in four to eight directions.

  8. Anonymous users2024-01-31

    Turn off the phone, press and hold the volume up button, power off button, and home button, release it when yellow English appears, enter the recovery interface, move the cursor with the volume button, select wipely Press the power on and off button to confirm, then move to wipe cache partition and press the power on and off button to confirm, and press and hold the power on and off button to exit. If it still doesn't work when you boot up, then enter the above mode, select the volume button to select Format Internal SD-Card and press the power button to confirm, this is to format the memory card (use with caution)··

  9. Anonymous users2024-01-30

    In the case that you forget the password, you can only go to the mobile phone store and ask someone to help you restore the factory settings of the mobile phone.

  10. Anonymous users2024-01-29

    Hello: Hello!

    According to your feedback, the machine screen is locked and cannot be unlocked. If you have not set the lock before, or you have forgotten the lock, it is recommended that you do not perform other operations to avoid more serious consequences. It is recommended that you take your phone to your local customer service center for a secure unlock!

  11. Anonymous users2024-01-28

    Hello: According to your description, after the mobile phone is subjected to strong **, there is a possibility of delay such as the virtual welding of the components, short circuit, partial damage to the screen and buried Li curtain or virtual connection of the cable base. If you continue to use it without detailed inspection and maintenance, you may be crushed or ** again, resulting in final damage to the machine hardware.

  12. Anonymous users2024-01-27

    That is, the touch point of the screen floated away, possibly static electricity such as water ingress. Try wiping it with a cotton cloth and toothpaste. Fix whether the screen will look at it or not. If you still can, then you can only change the screen.

Related questions
11 answers2024-03-20

Reliable,,It's all the same screen now。 Asking for so much money. It's not expensive, others have to earn some hemp from this business.

7 answers2024-03-20

After a long period of time after a static image is displayed, the screen will leave an afterimage of the image, and this residual image is permanent and cannot be eliminated, so only one mobile phone screen can be replaced at this time. >>>More

8 answers2024-03-20

After the phone accidentally gets water, it is recommended to do the following: >>>More

6 answers2024-03-20

Operation: Enter the incorrect unlock pattern five times, and the screen will display a prompt message "Please try again in 30 seconds", click "OK". Click "Backup PIN" in the lower right corner of the screen (forgot password), enter the PIN password you set before, and click OK. >>>More

19 answers2024-03-20

There are two ways to take screenshots of Samsung phone 7109: shortcut key screenshot and assistant menu screenshot. The specific steps are as follows: >>>More