What to do if Samsung burns the screen, the Samsung screen burns the screen and suddenly gets better

After a long period of time after a static image is displayed, the screen will leave an afterimage of the image, and this residual image is permanent and cannot be eliminated, so only one mobile phone screen can be replaced at this time.

Screen burning often appears on new electronic products, and many users have some bad operating habits when using mobile phones, which will lead to a greatly shortened service life of mobile phones. Screen burning is the most likely to be caused by bad usage habits.

This is especially true for plasma TVs and mobile phones with Samsung's AMOLED series, including Super AMOLED Plus HD, Super AMOLED Plus, and Super AMOLED.

Performance: After a certain period of use, it leaves permanent traces of use on the screen. Therefore, when using your phone, be careful not to keep the screen of your phone on the same screen for a long time.

AMOLED burn-in example.

It's so confusing, just look at the picture directly, pay attention to the position of the red line in the picture. You can see that the last two are an E in the black box, that is, the data network mode, E is the edge, that is, the 2G network, and the other is the familiar signal icon. That's what it is all about in simple terms, thanks to the AMOLED screen.

Each red, green, and blue sub-pixel emits self-light, and then red, green, and blue are the three primary colors.

Compose all the colors and display. If the same picture is displayed all the time, then the red, green, and blue pixels here will always be in a state of overconsumption. It's like if a person's eyes look too close for a long time, they will become myopic later.

I can't see the distance anymore, and I can't adjust it back. The signal icon, battery icon, time display, **, information, browser, and contacts in the status bar of the phone are displayed almost unchanged. So these places are flasks.

areas of focus.

iphone x

The cat's ears are the first to burn the screen.

Look at the picture, the two cat ears of the iPhone X, the left side has been displaying the time, the right side has been displaying the signal, wifi, battery, and you can't change it, this is where the iPhone X will start to burn the screen in the future. When the time comes, you can let the cat ears show the white background, and take your time to look at the shadow outlines of those icons. Then there's the dock bar at the bottom.

Dock bar for iPhone X.

But this position can be alleviated, why? If you are serious about looking at it from the beginning, you should know the answer, yes, it is to constantly change the position of these icons, or change the icon of the new app in. Just like preventing myopia, switch your eyes from time to time to see far and near, but this still can't solve all the problems.

First of all, according to the reason for screen burning, let's carefully analyze the regional location of screen burning. The first position is to display the three or more white dots of the screen pagination,This can't be controlled,If it's in the home interface, it will be displayed,But if you operate the iPhone into another interface, it's good,But this position must end up burning the screen。 The second position is the background layer of the dock bar, and this is the same, especially the edge position.

And then there's the four icons, how do you solve the four icons? The most radical way is to leave no icons, so that there are no four rounded rectangles of shadows. Then it is to put as little as possible, and then keep changing the position and app.

Then change the wallpaper of the iPhone X a little more frequently, this one fits all areas of the entire screen. Well, there is no jailbreak, so you can only do this.,As for the frequency of replacement, I don't think it's too high.,Just change it once a day.。

How to restore Samsung burn-in.

Here's why. The principle of screen burn-in is very simple, the screen pixels of LCD will not self-emit, OLED will, the same pixel emits light, if it lasts too long, it will permanently damage the pixels, thus leaving a mark on the screen. Maybe there weren't many mobile phones with OLED screens at that time, and the pot of screen burning was on Samsung's head.

1. Screen technology upgrade. Samsung's screen has been complained by countless people in the matter of screen burning, and it will naturally upgrade the technology, such as extending the life of pixels and improving the screen substrate, so as to extend the time point at which screen burning is triggered. For example, before a picture was stationary, 5 hours caused the screen to burn, but now it has improved to 10 hours.

2. Optimized by mobile phone manufacturers. One of the most obvious examples of optimizing the system settings to avoid a pixel emitting light all the time is the always-on display of mobile phones. Friends who are interested should have found that when the phone is locked, the content displayed on the screen is not static, but will be dynamically adjusted every once in a while, and a single pixel will be lit up by moving the position.

If the OLED screen is used normally, it may be very light after three to five yearsBurn-in, it may not be a problem.

As long as it is OLED, it will burn the screen, but if you have good usage habits, you can use it for a longer time, especially the E3 material, which will begin to have obvious traces in about three years, and it is unacceptable to continue to use LCD models.

The current mobile phone replacement speed is very fast, more than three years, less than half a year, will be replaced, generally at this time period, the screen of the mobile phone is still in a relatively young state. After all, a mobile phone is not a TV, and it will not be used for more than ten years as long as it is not broken.

How to deal with mobile phone screen burn-in:

1. Shorten the lock screen time.

The phone will have an automatic lock screen time, and if you don't perform any phone actions within the time limit, it will automatically lock the screen. In addition to saving power, this function can also prevent screen burn-in. If your phone is using an OLED screen.

It's best to keep the screen lock as short as possible.

2. Change the wallpaper often.

Open the phone, the first thing you see is the wallpaper, if you don't change it for a long time, it means that the phone will display this image for a long time, it is recommended that you set different lock screen wallpapers and desktop wallpapers, change them often, if it is a live wallpaper, it would be better.

When the mobile phone screen stays in a certain still screen for a long time (especially a few high-contrast screens), when switching to other screens, you can still see the afterimage of the original picture, and the afterimage will not disappear, this phenomenon is called "screen burning".

The OLED screen displays the content of the screen by emitting light through a very small "lamp", and these small lights have a service life. Similar to a light bulb at home, it will dim over time. Under normal use, the degree of attenuation of the brightness of the small lamp is very slight, but the attenuation speed is different in the bright and dark areas.

If the brightness of the picture varies greatly, the dwell time is too long, and the difference in attenuated brightness will become more and more obvious, and you may see "imprints". This is the display characteristics of OLED screens, with current technology, OLED screens will be more or less affected by "screen burn-in".

If you are using a OnePlus phone, we recommend that you take the following steps to ensure that you get the best OLED screen experience:

1. Shorten the automatic screen lock time, and let the mobile phone turn off the screen in time when not in use; You can go to the phone Settings > Display & Brightness > Auto Screen Off settings;

2. Avoid keeping the screen at the highest brightness for a long time, when using outdoors, try to avoid direct sunlight on the screen, and when using it indoors, you can set the screen brightness to automatically adjust the brightness mode; You can enter the mobile phone Settings > Display & Brightness > Turn on Auto-Adjust Brightness;

3. It is recommended to use live wallpaper or change the wallpaper regularly;

1. If the residual image will disappear after standing or switching to other screens for a period of time, it will not affect the phone, please feel free to use it.

2. If the residual image cannot disappear and has affected your normal use, it is recommended that you go to the local customer service center and have a professional engineer test and repair it for you.

It's because there's a problem with the circuit.

Screen burn-in means that after a long period of time when a still image is displayed, the screen will leave an afterimage of the image, and this afterimage is permanent and cannot be eliminated.

Precautionary method: Do not let the still screen stay on the phone screen for more than an hour, and do not let one picture stay for more than 20 minutes at a time. In the first 200 hours of use, the screen is more likely to burn in.

The high contrast ratio will make the Sakura Clan, the chemical group in the mega bush of the screen, burn more vigorously, which will shorten the necessary time required for the screen to burn in. It's best to turn down the brightness of your phone in the early stage, and switch the screen display content more when playing mobile games or other programs with still screens.