How to charge an electronic door lock? How to charge the combination lock

How to charge an electronic door lock? The electronic door lock does not use the charging lamp, and when the electronic door lock is pressed, he has a wire that is directly connected to the wire. You don't need to charge it, it will charge automatically, and it will charge automatically when it runs out of power, and you don't need someone to charge it.

Electronic door locks are not charging, electronic door locks generally have button batteries in them, or. No. five, No. seven batteries. Just replace the battery and you're good to go.

The smart door lock can use a No. 5 dry battery.

Make an offering.

Charging method of the password lock: Find the interface on the password lock and charge it with the power bank.

As long as the power bank is connected to the combination lock, the combination lock can be restored. There is also a situation, the power supply mode of the password lock is mainly the built-in power supply, so there is no need to connect the wire, if the password lock is out of power, the battery can be used for bending power supply.

Under normal circumstances, it is a rechargeable lithium battery or a No. 5 dry battery, which one to choose, but also depends on the specific situation of the password buried in the lock at home. The way to replace it is also very simple, if it is a dry battery, it can be purchased in supermarkets or convenience stores.

Precautions when charging the combination lock

1. Smart locks generally use dry batteries, or lithium batteries. The general battery life is about 6-12 months. The replacement of dry batteries is relatively simple, and it is enough to replace the old battery with a new one. Lithium batteries, on the other hand, can be reused, and the battery can be removed and charged when the battery is empty.

In order to avoid the normal use of the door lock due to the long charging time, you can buy one more piece to replace it, or you can choose to take off the battery and charge it at night.

2. The general smart lock has a low battery reminder function, when the power is low, when unlocking, the door lock will remind "the door lock is low in power, please replace the battery", when the reminder is turned on, it can also support the user to unlock 100 times, providing users with time to go out to buy batteries.

3. When the door lock is out of power, you can also use the key to unlock it, or use the power bank to temporarily power the unlock. However, the power bank can only be used as a temporary power supply, and cannot supply power to the smart lock for a long time. If the battery is not replaced for a long time, it is easy to cause battery leakage, which will damage the smart lock and reduce its life.

Prompt: The battery is insufficient and needs to be charged, I have been charging for 3 hours, how can I still prompt that the battery is insufficient?

Hello, happy to answer your questions and have found the answer for you, section.

1. The charging time of smart door locks varies depending on the brand and model. Generally speaking, the battery capacity of a smart door lock is not large, and the charging time will not be bent too long. Clause.

2. Under normal circumstances, the charging time of smart door locks is between 2 and 4 hours, and it can be used for a longer time after being fully charged. The first wide front stuffy.

Fourth, pay attention to the use of the original charger when charging, and avoid using unsuitable chargers to avoid damage to the smart door lock.

Summary. Generally, the fingerprint lock can be charged for eight hours at a time, which can be used for about a year, this electricity consumption is mainly related to the processor of the fingerprint lock, Jianshu smart fingerprint lock uses the best quality fingerprint processor, which is very power-saving, and some do not need to be charged, just use the battery. Only 4 batteries are needed, which can be used for about a year, which greatly saves resources and users use the unlocking in the later stage, and many use 8 batteries on the market.

Hello, happy to answer your questions. Generally, the fingerprint lock can be charged for eight hours at a time, which can be used for about a year, this electricity is mainly related to the processor of the fingerprint lock, and the Jianshu smart fingerprint lock is the best quality incoming shed liquid fingerprint processor, which is very power-saving, and some do not need to be charged, and the battery can be used. Only 4 batteries are needed, and they can be used for about a year, and many of them use 8 batteries on the market.

Hope mine is helpful to you.

The combination lock can be opened to replace the battery, and if there is an interface, you can use the power bank to charge it. Secondly, combination locks have a key opening, and if there is no electricity, you can use the key to unlock the lock.

Precautions for locking the door with a code:

1. When we use the password lock at home, we must remember our password, some people use a combination of password and fingerprint door lock, we can enter our own fingerprints, so that when we don't remember the password, we can directly press the fingerprint to enter the house.

2. If there are strangers around, we can use our hands to cover it a little and then enter the password to prevent strangers from entering the house to steal after remembering the password, which will bring certain security risks to our lives and property.

3. It is best to replace the combination lock at home once a year, so that it is safer.

Password lock to change password and enter fingerprint:

On the panel inside the door, press the Huixiang battery cover open button button, press and hold the battery cover to slide up, press and hold the setting button, continue to press the setting button for 5 seconds, after hearing the sound of the fingerprint lock, the screen will prompt whether to initialize, enter the initialization password, enter the initialization number in the keypad input interface on the outer panel of the fingerprint lock, and the fingerprint lock will send a prompt sound to indicate that the initialization is successful. <>