Lenovo laptop wireless Internet access prompts that the hardware radio is turned off

Updated on number 2024-03-14
11 answers
  1. Anonymous users2024-02-06

    Hello! For convenience, it is recommended that you go to Lenovo's service station to inquire about the diagnosis of the problem, the maintenance is free of charge during the warranty period, the main components are guaranteed for 2 years, the system and software are guaranteed for 1 year, foreign licensed goods need to register for IWS global warranty, and the choice of service station can be queried:

    Other questions can also be compared in these two forums, idea forum, think forum:

    Hope it helps, thank you.

  2. Anonymous users2024-02-05

    NextLenovo Power Management Software! ~

  3. Anonymous users2024-02-04

    Summary. 1..[Start Menu Button], open [Device Manager], find the wireless network card and enable it, if you can't find the wireless network card, the network card switch of the wireless network card may be turned off (some models have a network card switch), if there is no network card switch, it may be poor contact or damage, and hardware maintenance is required.

    2.You can also try right-clicking the wireless card in Device Manager, and then click [Properties] - [Driver] - [Update Driver].

    Lenovo laptop shows WLAN disabled, what should I do?

    1..[Start Menu Button], open [Device Manager], find the wireless network card and enable it, if you can't find the wireless network card, the network card switch of the wireless network card may be turned off (some models have a network card switch), if there is no network card switch, it may be poor contact or damage, and hardware maintenance is required. 2.

    You can also try right-clicking the wireless card in Device Manager, and then click [Properties] - [Driver] - [Update Driver].

    None of the wireless icons.

    What is the network card?

    Hello, dear, you try 1 right-click on the bottom taskbar Right-click on the bottom taskbar and left-click on properties. 2.Click Customize in the notification area In the properties menu settings, click Customize to the right of the notification area.

    3.Find the box on the right side of the network In the notification of the icon, find the box on the right side of the network, show the icon and notification instead, and click OK when you are done. 4.

    The wireless icon at the bottom of the desktop is immediately displayed.

  4. Anonymous users2024-02-03

    Here's how to deal with Lenovo laptop wifi showing turned off.

    1. Take Lenovo Xiaoxin Air 12 and Windows 10 as an example, first click the icon on the left left side of the laptop desktop to find the settings and click to enter.

    2. After entering the Windows settings interface, find [Network & Internet] and click to enter.

    3. In the options on the left, you can see all the settings of the laptop network connection, and click the second item [WLAN].

    4. After entering the wireless LAN WLAN interface, you can see that the current status display is off, click the switch button.

    5. After clicking, you can see that the color of the button changes to blue and the display status is on, and the wifi function of the computer has been re-turned on.

  5. Anonymous users2024-02-02

    First of all, check the indicator light of the laptop, there is a wireless signal style indicator, if it is not on, it means that the wireless signal function is not turned on, you want to confirm it!

    If it doesn't light up, then there is a function key "fn" in the lower left corner of the keyboard of the laptop, and there are some function keys in the top row, among which there is a button like an antenna signal, which is on my Acer laptop on the "F3" key, you can find it yourself!

    After these two keys are found, press these two buttons at the same time, and the wireless indicator will light up, so that the wireless function is turned on!

    However, there are also laptops that have hardware wireless DIP switches, please check whether it is in the "on" state.

  6. Anonymous users2024-02-01

    The specific steps to solve the problem are as follows:

    1.Turn on the hard switch of the network cable network card and touch the wireless logo with your finger. It's red before it's not turned on, and it's blue when it's turned on.

    <>4.Enter the password for your wireless network and click OK.

    <>6.Wireless will be connected to the wireless network in a while, and after the connection is successful, the interface as shown in the picture will appear, and now you can use wireless Internet access. The next time you turn on your computer, it will automatically connect to a wireless network.

  7. Anonymous users2024-01-31

    You turn on the wireless function, you can see if there is an icon on the keyboard that looks like a tower, click on that key, or fn plus that key, if the keyboard doesn't, then your switch is on the side of the machine, look for it, and move it.

  8. Anonymous users2024-01-30

    Is there a wireless card switch on the side wall of the computer, and you turn it off.

  9. Anonymous users2024-01-29

    Check the driver to see if it is installed successfully.

  10. Anonymous users2024-01-28

    The Bluetooth position and opening steps of the wireless network switch are as follows:

    2. Press the "FN+F5" button to pop up the Lenovo wireless device setting dialog box, and set the wireless Bluetooth to "on" state;

    3. After setting up in this way, the wireless and Bluetooth modules are in normal working condition.

  11. Anonymous users2024-01-27

    Press the button that fn plus the wireless network icon.

Related questions
29 answers2024-03-14

The 54M PCI wireless network card you said is different from the network card of China Mobile Unicom. >>>More

12 answers2024-03-14

Unicom is a pure 3G network signal is very good, but when it is not packaged, only the traffic, not suitable for non-business personnel to use you to play eternity 1 day, your laptop money may be gone, the mobile base station has not been laid, he automatically converts to GPRS when there is no 3G signal, the rate is in 10K seconds, too poor, you can consider it when Telecom has a package, the signal is also OK, it is an analog 3G signal, but play with a 3G card, the signal will not be too good, and the ping value should be achievable within 100-200.

17 answers2024-03-14

It's easy, just use a clip, and with the computer turned on, you just throw the clip on the motherboard.

10 answers2024-03-14

Have you tried changing the network cable?

Have you tried changing your computer? >>>More

16 answers2024-03-14

window7 just join the home network directly xp xp xp seems to turn off the lan firewall haven't used the xp system for a few years forgot =. =