How to use the LAN wireless Internet access for laptops Details 0 3

window7 just join the home network directly xp xp xp seems to turn off the lan firewall haven't used the xp system for a few years forgot =. =

Wi-Fi and LAN are in the same network, and you can enter it directly.

1. When setting up a shared connection, right-click the "Local Connection" icon in the "Network Connection" of the host, 2. Select "Properties", switch to "Advanced" in the open properties dialog box, 3. Check the "Allow other network users to connect through this computer's Internet connection" checkbox, 4. Then select "Wi-Fi Connection" in the "Home Network Connection" menu.

5. Then check the box below. After the settings are complete, you can log out, so that you can share the Internet on the client.

Click on the online neighborhood - set up a home or office network - and go all the way to the next step, fill in the name of the team must be the same as the name of the other two, and finally restart it.

In fact, sharing has nothing to do with wired or wireless, if it still doesn't work, there may be a problem with your local policy settings.

Buy a wireless router and connect 7 to 8 no problem.

TP-Link wireless routers are about 150 each.

The sharing operation is as follows:

Make sure that the workgroup of the laptop and the printer host in the shared LAN are in the same group;

Press and hold the win+r key at the same time to bring up the running lifeline;

Run the numeric input of the IP address of the shared LAN printer host) and OK;

Go to the LAN printer host and double-click to select the shared printer you want to add;

Install the printer driver on the laptop, and you can use the shared printer normally after the installation is completed.

Don't make the simple things complicated.

Turn off the DHCP function of the wireless router and connect the network cable that was originally connected to the WAN port of the wireless router to the LAN port, that is, the wireless router is used as a switch. Wireless SSID doesn't have to worry about it. The address is still taken from the Layer 3 switch through the wireless function.

I believe that the IP address of your computer A is assigned by Layer 3 switching.

If you think there are many computers behind computer 1, there are many more computers behind computer 2. If the IP address of Layer 3 switching is insufficient, two methods, one is to replace the wireless router with the kind that can be used in industrial wireless APs, which has the function of splitting VLAN.

2 is to install the printer in the network segment of computer 1 and computer 2. The easiest way is to add a new printer to the network segment of computer 1 and computer 2. And publish and share, or buy a network interface printer directly.

1. If your printer has RJ45 port, configure an IP address for the printer, and other computers in the LAN (including wireless wired, as long as it is a LAN) are directly connected through the IP address assigned to the printer (there are many specific operation steps on the Internet).

2. If your printer does not have RJ45 port, then as shown in the figure, configure a fixed IP address for computer A, and then install the printer on computer A to do sharing, and other computers in the LAN are connected through the IP address of computer A. In addition, you can also use the IP address of computer A as a local port to connect (this method is suitable for Win7 64-bit operating system).

Steps to create a Wi-Fi network with your computer:

1.First, set the IP address on each computer, set it in the same network segment and cannot be repeated, such as and . The setting method is as follows: open "Control Panel" - "Network Connection", right-click "Wireless Network Connection", select "Properties" - "Internet Protocol";

2.Go back to the interface of the "Wi-Fi connection" property, click "Wi-Fi Configuration", click on the "Advanced" bar, and select "Computer to Computer Only" (the above 2 steps are required on each computer);

3.Select a machine as the server and click Add on the wireless network configuration page.

4.For the security of the local area network, in the pop-up page, it will be"This key is automatically provided to me"The front tick is removed. Then set the SSID number and the network key (a 16-base character that must be 0-9 or a-f.).

This group of characters needs 10 bits), click OK and the server setting is completed;

Can I get the IP address of the unit office or network, find the unit IT

Personnel set one manually,There's another point,Is your computer set the broadcast number connection as the default Internet access mode?,Please set the "LAN" as the default in the network options of IE,Find an IT staff to do it。。。

Your wireless network card supports the WDS bridging function.

There is a way to set up your computer in the form of an infinite router that you can use on your phone, and you can learn it.

Shared resources are not divided into wired and wireless As long as they are within a local area network, you can try to operate the following methods:

Set up on a computer with a printer: Online Neighbor - Set up a home or small office network - Other - The first option, this computer. And then you can use the other computer to access the printer through your online neighbor, the workgroup.

Check if the wireless device can access the Internet normally, if you can, enter the IP address of the computer connected to the printer in the running area, such as: Press enter again, you will see the printer, and then right-click and select Connect.

Try connecting using a wired network and tap into the shared desktop computer to connect the printer. Alternatively, you can select the first option "Browse Printers" to find the shared printer in the workgroup and select the network path of the printer. Note:

1.Users who can't find their LAN on a workgroup --- may be able to find the shared printer in - My Computer - Find (enter the IP address) - select the printer - and start selecting Test Print Page 2Set the default printer.

3.Check if the PC is within a LAN 4The main thing is to open the guest account.

You only give 5 points, and you say you can't ** don't write, big brother, you just wake up...

Typists make more money than that.

It's not clear in a couple of sentences ...

Apple laptops can connect to a LAN by following these steps:

1.Click on the Apple logo in the upper left corner to open "System Preferences" as shown in the figure below, or you can directly click the "System Preferences" icon on the desktop to open it.

2.Find "Internet & Wireless" in "System Preferences", open "Network" to set the network settings, set the location to automatic, after connecting to the network cable of the LAN, the system will automatically obtain the IP address of the unit in the LAN according to DHCP, and you can connect to the network immediately after assigning.

3.If you cannot access the Internet with the automatically obtained IP address, you can ask the administrator of the LAN to obtain the "router" (i.e., gateway) address and the IP allocation CIDR block of the LAN, and manually set the IP address.

4.Click the "Advanced" button to enter the "Advanced" settings, and set the "Workgroup" in the Wins tab to the workgroup name of your local area network, for example, the default setting commonly used by Windows is uppercase Workgroup. This needs to be the same as the name of the local area network you are on, such as the internal departmental network working group in your company.

The "netbios name" is customizable, and the name is the name of the computer that others can see in the local area network.

Host creation.

Win7: Control Panel - Network & Internet - Network & Sharing Center --- Manage Wireless Networks - Added.

XP: First, open the Network Connections window in the Control Panel. Right-click on "Wireless Connections" here and select "View Available Wireless Networks" from the context menu.

Subsequently, click "Change Advanced Settings" on the right side of the "Wi-Fi" dialog box that opens.

Open a Wi-Fi Connection dialog box and switch to the Wi-Fi Configuration interface.

In the Wi-Fi Connection Properties interface, click the Advanced button in the lower right corner to open the Advanced Options interface, select Computer-to-Computer Only in the Networks to Access option, and close the Wi-Fi Connection dialog box. This is where the above settings take effect.

Then continue to open the "Wi-Fi Connection" dialog box, click the "Add" button on the "Wi-Fi Configuration" page, pop up the "Wi-Fi Properties" and enter a flag text in the "Service Setup Flag (SSID)" column, you can enter it at will. Confirm the exit after setting.