How to connect a mobile set top box to a wireless network?

The operation method and detailed steps of connecting the mobile set-top box to the router are as follows:

1. First of all, open the main interface of the TV set-top box, find the "Settings" option, and click enter, as shown in the figure below, and then enter the next step.

2. Secondly, after completing the above steps, click on the "Network & Connection" option as shown in the image below and proceed to the next step.

3. Next, after completing the above steps, you need to select a wireless network.

to enter, as shown in the image below, and then to the next step.

4. Then, after completing the above steps, select the wifi you want to connect as you need, as shown in the image below, and then proceed to the next step.

Notes:

The smart set-top box can connect to the home gateway through WiFi; At the same time, the set-top box has the function of a hotspot, which can be used as a covered AP for home WiFi after being connected to the wired network.

Note: AP is not the same as wireless routing, and set-top boxes do not have the routing function of automatic dialing, so they cannot replace wireless routers. Use.

Search the mobile set-top box to unlock the wifi and find a way.

The box itself is with wifi function, but the movement is turned off in the system.

I'm using a mobile box that has been brushed and wifi can be used, but after brushing, it's an ordinary box, not a mobile line to watch TV.

1. Find the network cable interface behind the box, connect to the network cable, if the other end of the network cable has been connected to the home router, the indicator light on the interface will be on at this time, indicating that the network cable has been connected;

2. Connect the box with the TV with an HDMI cable, and open the box and the TV. Press the settings button on the remote control to open the settings interface;

3. Select "Network Information";

4. Turn off "Enable WiFi" in "Network Settings";

5. Select "DHCP" in "Wired Network", and the router will automatically assign an IP address every time the box is turned on. If you have a little understanding of the computer network, you can choose "static IP", which is conducive to managing the network;

6. The IP address must be set to a network segment with the router, the first three digits of the C type address must be consistent with the router address, and the fourth digit can be selected in 1-254, be careful not to coincide with the router and other used addresses, the subnet mask is set to, the gateway address and DNS address can be filled in with the router address, and then save, exit, and restart the box.

There is a system setting in the network settings,The password is10086,Just wait for three minutes for the system update,China Mobile's TV set-top box can only watch TV from the IPTV port wiring of the optical modem,It does not support wireless and router wired connection。 Press the "Menu" key of the remote control of the set-top box and find the "Settings" option; In the settings menu, find [WLAN] and click to enter; Click the Turn Off and Open button in the upper right corner of the Wi-Fi Settings page, and click Turn on Wi-Fi.

If the mobile set-top box is provided by China Mobile to the first customer, they should send someone to install and debug it for free.

If the computer can access the Internet normally with a network cable, one end of the network cable is connected to the LAN port of the router, and the other end is connected to the network port of the set-top box, and the HDMI cable between the set-top box and the TV.

Connect. <>

Using network cables, the LAN port (100 Gigabit port) of the router at one end and the WAN port of the set-top box at the other end (one port on the set-top box), generally do not need other settings for wired connection.

1. Confirm that the set-top box has opened the network**, not only to watch TV**. If you want to use a wired network, you also need to make sure that the network cable interface should be plugged in correctly, because there are two interfaces.

2、Turn on the TV,You will first enter a navigation page。 Use the remote control to select to enter the setting hole opening page. Some set-top boxes need to press the four different color keys of the remote control in order to enter the settings page.

3. After entering the settings page, find the wifi management page, and leave the rest alone.

4. Select Wireless Settings, which is the page for WiFi settings.

5. Select userssid to enter the start settings.

6. The name of the SSID is the name of the wifi to be set, and the name found when the mobile phone is looking for wifi is this year.

The password at the bottom is set according to yourself. The encryption method in the trembling hole can be better regardless of the default one. So the wifi setup is messed up.