How much does a small machine for manufacturing chemical feed cost?

The ** of small pellet machine is about 2000-20000 per unit. The best of small pellet machine is affected by many aspects, such as brand, category, specification, market, etc. Before choosing to buy, it is necessary to understand and compare in many aspects.

A small granulator is a machine that can make mixed powders into granules, and can also crush lumpy dry materials into the required granules.

Hello, generally speaking, the cost of a small feed processing plant is not very high. For example, the investment of a small organic fertilizer plant is about 8-200,000 yuan, and the organic fertilizer production line of each configuration is different. The chicken manure and pig manure organic fertilizer production line only needs a crusher, mixer, granulator (optional), screening machine and packaging machine for low configuration.

The main thing is the cost of equipment, as for the funds needed to build a factory, it depends on how big a factory you want to build? What is the annual production? What are the main raw materials?

market positioning, and so on.

1. It is necessary to understand the specific procedures for setting up a factory.

To open a small feed factory, you need to go to the local industrial and commercial bureau for industrial and commercial registration, and then obtain a production and business license, and apply for a tax registration certificate to the tax department, but also need to go to the local animal husbandry bureau feed office, for feed production license, application and product tax exemption related procedures, generally in view of the protection of feed brand considerations, it is recommended to the county or provincial level of industry and commerce, for trademark registration.

2. Pay attention to the selection of venues.

Generally, the opening of a small feed mill needs to have an independent factory area, the production workshop needs to meet the requirements of the production process, and the traffic should be convenient, in order to prevent the product from being polluted, but also in order to reduce the noise and reduce the pollution caused to the living area, the site needs to have good lighting, dust removal, ventilation and fire protection measures.

3. Carefully select production and processing equipment.

The equipment requirements are simple and efficient, pay attention to production performance, you can choose accessories that are easy to buy, and the maintenance service is more convenient for equipment manufacturers, relatively speaking, the return on investment of feed mills is relatively high, although the market competition is fierce.

Feed processing equipment is usually selected according to the production scale, production varieties and production technology. As a result, different feed mills often use different equipment. However, some basic equipment of feed processing are consistent, according to the process flow, including raw material receiving and cleaning equipment, conveying equipment, crushing equipment, batching equipment, mixing equipment, pelleting equipment, extrusion equipment, liquid spraying equipment, ventilation and dust removal equipment, packaging equipment and central control system.

Raw material receiving and cleaning equipment mainly includes weighbridge, primary cleaning screen and cylindrical silo, etc.;

Conveying equipment commonly used are screw conveyors, bucket elevators, scraper conveyors, belt conveyors and pneumatic conveying equipment;

Crushing equipment includes magnetic separators, feeders, pulverizers, etc., among which there are many types of pulverizers, commonly used are hammer and claw pulverizers and micro pulverizers that need to be crushed with finer particle size;

The batching equipment generally adopts electronic automatic batching scale; The types of mixers used are horizontal twin-shaft (single-shaft) paddle mixer, horizontal spiral mixer, vertical mixer and waist drum mixer for the production of premix;

Granulation equipment includes steam boilers, conditioners, granulators, coolers, classifiers and crushers, etc.;

Extrusion equipment includes conditioners and extruders; Liquid spraying equipment includes fluid reservoirs, vacuum pumps, and flow meters;

Ventilation and dust removal equipment includes suction fans, brake cranes and dust collectors, etc.; Packaging equipment includes packing scales, sealing machines, etc.;

The central control system is the "brain" of the entire process, where the control systems of various equipment are concentrated.

The equipment of a single pellet machine is about a few thousand yuan. If it is a pellet machine production line, it will probably range from tens of thousands to hundreds of thousands of yuan. The most critical factor affecting the pellet machine is the model (capacity) of the pellet machine, as well as the configuration of the pellet machine.

If you want to do a small feed processing plant, you can use a small feed pellet production line, so that the production efficiency and automation will be higher. However, if it is a family farmer, the output is generally not high, and you can choose a smaller pellet feed machine.

Dear, I'm glad to answer your <>

The investment cost of starting a small feed mill is about 100,000-200,000 yuan, and the annual output of a small feed mill can reach about 2,000 tons. A small feed mill generally refers to a production and processing plant similar to a family workshop. The venue requirements are not high.

Just keep an eye on the grinder, blender and sealer, then buy some processing ingredients such as fishmeal, corn, soybeans, whey meal and canola meal. It basically has the capacity of feed production and processing. The annual profit of a small feed mill is directly related to the annual production capacity, that is, the higher the annual output, the higher the annual profit.

Generally speaking, the annual output of small feed mills can reach about 2000 tons. According to the calculation of 300 yuan tons, the annual profit is about 600,000 Kaiyuan and yuan. <>

Hello dear, the initial construction of a small feed mill requires an investment cost of about 100,000-200,000 yuan, and the annual output of the small feed mill can reach about 2,000 tons. If the profit is calculated according to the profit of 300 yuan, the annual profit is about 600,000 yuan. A small-scale feed-based plant is a production and processing plant similar to a family workshop.

As long as you buy a crusher, mixer, and sealing machine, you can buy some processing raw materials for production and processing. Compared with the investment cost of millions of large feed mills, the threshold for starting a small feed mill is still very low, and the general investment cost is about 100,000-200,000 yuan. Of course, this fee is only an estimate, and the specific cost depends on the actual situation.

A small feed mill generally refers to a production and processing plant similar to a family workshop. The venue is not demanding. It is enough to buy a crusher, mixer, sealer, and then buy some processing raw materials, such as fishmeal, corn, soybeans, whey powder, rapeseed meal, etc., with basic feed production and processing capacity.

The price varies depending on the region. Freight, rent, labor.

The ** of small feed pellet machine is about 2000-20000 per unit. The best of small feed pellet machine is affected by many aspects, such as brand, category, specification, market, etc. Before choosing to buy, it is necessary to understand and compare in many aspects. Long-term**.

Hello! We are glad to answer for you, what equipment do you need to open a small feed mill: 1. Conveying equipment (1) can use bucket elevators, screw conveyors, scraper conveyors, etc.

2) The screw conveyor Huaihui can be conveyed horizontally, obliquely or vertically, characterized by simple structure, good sealing, small cross-sectional area, and is divided into shafted screw conveyor and shaftless screw conveyor in the form of conveying, and is divided into "U" type screw conveyor and tubular screw conveyor in appearance. 2. Crushing equipment (1) includes magnetic separator, feeder, crusher, etc. (2) The magnetic separator is suitable for wet magnetic separation of roasted ore, ilmenite, lead-excited magnetite, pyrrhotite and other materials with a particle size of no more than 3 mm, and can also be used for iron removal operations of coal, non-metallic ores, construction lead materials and other materials.

3. Batching equipment (1) can generally use electronic automatic batching scale. (2) Batching scale refers to a weighing instrument that is given a pre-given mass ratio to measure the batching of several substances in the weighed matter, which can be used for the batching measurement of a variety of materials, and can also be used for the measurement of a material (hopper scale). (3) The batching scale is matched with the packaging and sealing machine, that is, the quantitative packaging scale.

What equipment does the feed processing plant need 4. Other equipment (1) Pelleting equipment: including conditioner, classifier, pellet mill, cooler, crusher, steam boiler, etc. (2) Extrusion equipment:

It mainly includes extruders and conditioners. (3) Packaging equipment: mainly including packing scales, sealing machines, etc.

4) Liquid spraying equipment: mainly including liquid storage tank, vacuum pump, flow meter. (5) Ventilation and dust removal equipment:

Including suction fans, brakes and dust collectors, etc.; (6) The central control system is the "brain" of the entire processing process, and the control system of various equipment is concentrated here. Thank you for your inquiry, I hope my answer is helpful to you.