-
Tools required: wrench, oil pump.
1. Clean the contact surface between the cylinder block and the water pump sealing ring first.
2. Install the water pump bolt after applying lubricating liquid to the water pump sealing ring.
3. Install the timing shell.
4. Install the camshaft and timing belt shaft.
5. Install timing idlers.
6. Install the belt after that.
7. After installing the belt, install the timing shell, so that the belt is installed.
-
1. First of all, pull the generator spindle outward to facilitate the subsequent installation of the belt.
2. After that, use a wrench to release the idler wheel of the generator.
3. After that, pull the auxiliary wheel of the generator outward to facilitate the subsequent installation of the belt.
4. After that, align the position of the main wheel of the generator so that the convex groove of the main wheel is the same as shown in the figure.
5. After that, install the generator belt.
6. Wrap the generator auxiliary wheel belt so that the engine belt is installed.
-
The steps are as follows:
1. First of all, clean the contact surface between the cylinder and the pump seal.
2. Apply lubricating oil to the sealing ring of the pump and install the pump bolts.
3. Install the timing shell.
4. Install the camshaft and synchronous belt shaft.
5. Install the timing runner.
6. Then install the belt.
7. After installing the belt, install the timing shell to complete the belt installation.
-
Install it as it is [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】
-
1. First of all, pull the main shaft of the generator belt outward to facilitate the belt winding.
2. After that, pull the slave wheel of the generator outward.
3. After that, wrap the belt around the idler pulley of the generator.
4. After that, use a wrench to adjust the tightness of the generator idler pulley, so that the belt can bypass the idler.
5. After that, the belt is bypassed around the idler wheel and connected with the two slave wheels of the generator, so that the belt winding is completed.
-
The method of Zotye T600 automobile engine timing chain is as follows: the intake and exhaust camshafts are turned to a relatively horizontal position, and the crankshaft pulley is fixed to the front cover to complete the timing chain.
The engine of Zotye T600 car can effectively avoid the problem of timing belt, and the timing chain made of large steel can easily cope with the wear and tear caused by the daily vigorous movement of the automobile engine. The strength is much greater than that of the rubber material, and the deformation of the timing chain also decreases with the strength to a certain extent.
The Zotye T600 automotive timing chain is able to keep the engine timing system running normally without breakage. However, the timing chain also needs to be checked regularly by the owner to avoid a certain degree of stretching of the chain, resulting in problems in the operation of the automobile engine.
-
Replace the new bearing with a new oneNutsAfter tightening the nut. Use the opening to rivet the edge of the nut to make the nut stronger, install the dust cap, and install the brake disc.
The brake caliper was replaced with a bearing this time.
The level of defects in the Zotye T600
Its power is a little weak, the start speed is very meaty, maybe the weight of the car itself is also very large, so it will be a little bit of a calf Lu number pull the feeling of the cow feeling that the power is not very sufficient, our road is not good to have a lot of small slopes, sometimes the car will shake when driving.
There is a little meat at the beginning may also have something to do with my reluctance to step on the accelerator, to say that I am not satisfied, the smell of the car is really a little big, the car is brought back to dry for half a month or there is a little smell, with children are afraid to sit for a while, the most dissatisfied is some details, this should also be a domestic car.
The common problem. The seat is a little rough, and there are also seals and gaps that need to be improved for this car, the more dissatisfied is its steering power, this car is still mechanical-hydraulic steering, although for this kind of model, but it always feels like at the start, the steering is still a little enviable.
To say the three major parts, Zotye now has its own engine, although the data is ordinary, but after all, the old Mitsubishi is abandoned, and the engine of SAIC is optional, the gearbox is also purchased Dongan 6AT or wet dual-clutch, and the chassis is tuned by a foreign professional team, so these three points are much better than the so-called Harvard, which has a large sales volume. Secondly, each of Zotye's car designs are at the forefront, although there is a time to learn from imitation, but who can refuse a good-looking car?
In fact, this is not absolute, in general: avoid engine idling for a long time, and avoid sudden braking as much as possible. Use the high and low gears reasonably and maintain the appropriate driving speed. >>>More
Zotye T700 is now equipped with 2 engines, one of which is the Tongling Ruizhan engine developed and improved by Zotye itself, which is produced in Tongling, Anhui Province. Mitsubishi's engine will be equipped with an engine from SAIC in the future.
I don't think Zotye Auto is very popular in the eyes of the Chinese people, on the contrary, the impression in the eyes of the Chinese people is relatively poor, and the Chinese people's trust in the safety performance and quality of Zotye is also relatively poor. Chinese people do not recommend Zotye Auto for the following reasons: >>>More
I think Zotye E200 is better, the key Zotye E200 has fast charging technology, who will not encounter the situation of going out and finding that the car is out of power in ordinary life, if the car supports fast charging, it can save a lot of unnecessary trouble, and this car is also very stylish.