The Redmi phone battery is identified abnormally, and the charging is turned off

Updated on number 2024-03-15
8 answers
  1. Anonymous users2024-02-06

    The main reasons and solutions for Redmi's "Abnormal battery recognition, charging has been turned off, please try again" are as follows

    1. The mobile phone battery is not original and has not been officially certified by Xiaomi, so the Redmi phone will prompt this information when it detects a mismatch; Solution: Use the official original battery to return to normal.

    2. If there is a problem with the system of the mobile phone that leads to the identification of abnormal battery, you can try to charge it in the shutdown state, or restart the mobile phone after charging, if it still can't be solved, you can consider restoring the system of the mobile phone to the factory setting state or flashing the data into the new system for the mobile phone to solve the problem.

    3. If it can't be solved after flashing, it may be a hardware problem, such as motherboard chip, processor, memory, etc., which needs to be solved by contacting Xiaomi's official after-sales service for maintenance.

  2. Anonymous users2024-02-05

    Hi Mi Home is open Tuesday to Sunday, 10 am to 6 pm.

    Xiaomi's after-sales principle is the failure of non-human damage: return within seven days, replacement within fifteen days, and within the one-year warranty period, non-human damage is completely free.

    I hope the above reply can be helpful to you.

  3. Anonymous users2024-02-04

    See if you use a 2A battery, the shape data of these two batteries is completely consistent, but it is not universal, and it cannot be recognized when you change it.

  4. Anonymous users2024-02-03

    The Redmi phone battery recognition is abnormal and cannot be charged for the following reasons:

    1. The charger used is not random, it is recommended to use the random original charger and charging cable to charge to see if it can be restored to normal;

    2. The mobile phone battery has reached its service life and cannot be charged, so you need to go to the after-sales service to replace the mobile phone battery;

    3. If there is a fault in the mobile phone charging tail plug, such as poor contact, it is recommended to send the mobile phone to the after-sales service for maintenance.

  5. Anonymous users2024-02-02

    Battery copycats! Or it's a meter 2s, which is charged with a seat.

  6. Anonymous users2024-02-01

    Plug and unplug the charger repeatedly and restart the phone.

    If the problem persists, it may be a system problem with the mobile phone and needs to be solved by Shuangqing.

    Shuangqing needs to enter the REC mode of the mobile phone, and there are two ways to enter.

    1. Click System Update, click the menu key to select Restart to Recovery, click OK, and the phone will reboot into Recovery mode.

    2. In the shutdown state (buckle battery shutdown), press and hold the power button and the volume down button at the same time, and release the button after lighting up the screen.

    Then you'll see three options.

    Recovery mode means to enter REC mode.

    fastboot mode means to enter the wire brush mode.

    norma boot means reboot.

    At this time, the volume down button is the selection key, the volume up button is the OK key, and the power button is useless.

    Press the volume down button to move the cursor to recovery mode, then press the volume up button to confirm, and wait for a few moments for it to appear.

    A green android robot lying on the ground, finally press the power button to enter.

    At this time, the volume up button is the confirmation key, and the volume down button can be selected to start double clearing.

    3.Select [Wipe Data Factory Reset] yes -

    4.Select [wipe cache partition] yes -

    5. Wait for the progress bar to end, press Back, select [Reboot System Now], and the phone will start to restart automatically.

  7. Anonymous users2024-01-31

    Replace 1 by one, first change the data cable, then change the battery, the charging head, and finally it doesn't work, that's the interface problem View the original post

  8. Anonymous users2024-01-30

    Reboot, or change the battery.

Related questions
12 answers2024-03-15

I think you may be using the old universal charger, there is a positive and negative conversion button on it, you correspond to the two electrodes on the left and right of the battery, if the charger's indicator light is not on, then you can press the conversion button, in addition, it should be noted that if your battery is put for a long time, the voltage is too low, even if the indicator light is clamped right, it will not light up, you can charge it for 10 minutes first, if it is not lit, then press the conversion button, and then charge a certain line, But only if you make sure that your charger is good. Otherwise, you can simply spend a few dollars to buy a new universal charger that automatically converts the positive and negative poles.

8 answers2024-03-15

Half of the electric charge can't be charged, so what do you want?

22 answers2024-03-15

There are many users who often leave their mobile phones on while charging, which will actually harm the life of the mobile phone. Because in the process of charging, the circuit board of the mobile phone will heat up, and if there is an external ** at this time, it may generate an instantaneous backflow current, causing damage to the internal parts of the mobile phone. >>>More

19 answers2024-03-15

Mobile phones have now become an inseparable part of people, from children to the elderly, almost everyone has a mobile phone, and the function of mobile phones is becoming more and more powerful. A mobile phone in hand camera, tape recorder, communication equipment, wallet, etc. can be in a small mobile phone, in order to pursue convenience and beauty, so the power is not durable, then what follows is charging, what is the correct way to charge, now mobile phones are using lithium batteries, so buy home and charge normally, do not need to be full of power as before. The correct charging method should not be less than 10% charge, try to keep the charge fully charged (this is good for the battery), slow charging and slow discharging will help the service life of the battery.

6 answers2024-03-15

Your phone has a minimum operating voltage setting. For example, yes. >>>More