-
The first step is to determine the type of position detector: incremental encoder and absolute encoder.
Judgment method: Check the value of apcx in the fifth digit of system parameter 1815 0: incremental encoder, 1: absolute pulse encoder.
The second step is to set the reference point: a, incremental (:1, manually move the machine tool to the specified reference point position (stop type must make the reference point deceleration signal (*dec) change from 0 to 1 back to the original state. )
2. MDI mode enables parameter write protection.
The fourth digit of apzx is changed to 1 and then to 0.
4. Shut down and restart, and the parameter write protection will be restored.
5. Manually return to zero to check whether the position of the reference point is correct.
2. MDI mode enables parameter write protection.
apzx, first to 0, then to 1.
4. Shut down and restart, and the parameter write protection will be restored.
5. Manually return to zero to check whether the position of the reference point is correct.
-
Do you need to return to zero when your machine is turned on, if you want to return to zero operation, the zero position depends on the position of the collision block on the machine tool bed; If you don't want to go back to zero, it means that the system battery remembers the zero position, and you can adjust the zero position and reload the battery.
-
Summary. Fanuc 0i-MD comprehensive coordinates only have relative coordinates, mechanical coordinates, and remaining movement, to display absolute coordinates, you can set the following settings: 1. Enter "System Settings", select "Coordinate System Setting", "Coordinate System Setting Screen"; 2. In the "Coordinate System Setting Screen", select the coordinate system that needs to display absolute coordinates, and set the "Display Form" to "Absolute Coordinates". 3. Then enter the "Status Display", find the absolute coordinates that need to be displayed, right-click, select "", and select the coordinate system to be displayed in the "Absolute Coordinates", and the absolute coordinates can be displayed.
Fanuc 0i-md comprehensive coordinates only have relative coordinates, mechanical coordinates, and the remaining amount of movement, and there is no absolute coordinate display.
Fanuc 0i-MD comprehensive coordinates only have relative coordinates, mechanical coordinates, and remaining movement, to display absolute coordinates, you can set the following settings: 1. Enter "System Settings", select "Coordinate System Setting", "Coordinate System Setting Screen"; 2. In the "Coordinate System Setting Screen", select the coordinate system that needs to display the absolute coordinate rock width, and set the "Display Form" to "Eggplant Absolute Coordinates" bold and bright; 3. Then enter the "Status Display", find the absolute coordinates that need to be displayed, right-click, select "", and select the coordinate system to be displayed in the "Absolute Coordinates", and the absolute coordinates can be displayed.
It's also like MD's computer itself is like this.,Only the display is so disadvantageous.,MC's seems to have a comprehensive display and interface.,But it doesn't work.。 Generally, the test program is just a test test. Or turn off the fourth axis, the parameter 8130 4 is changed to 3, and the 465 may be a problem with the amplifier.
The system is set up on that screen.
The setting of the FANUC 0i-MD system can be completed in the following interfaces: 1. Main menu: located in the upper right corner of the program interface, you can access the setting functions of all FANUC 0i-MD systems.
2. System menu: Located in the upper left corner of the program interface, you can access all the setting functions of the Fanuc 0i-MD system, including machine parameters, system parameters, software parameters, IO parameters, safety settings, etc. 3. On-screen menu:
Located in the lower right corner of the program interface, you can access the setting functions of the Fanuc 0i-MD system, including axis locking, axis serving, axis limiting, safety settings, status display, alarm elimination, etc. 4. Dialog: Zen Socks Chang can access the setting functions of the FANUC 0i-MD system, including machine parameters, system parameters, software parameters, IO parameters, safety settings, etc.
-
Servo alarm, servo amplifier ready signal disconnect,
The parameters of the set software are incorrect.
CNC lathe programming** is as follows:1. G00 --- fast positioning. >>>More
g66p a b c d f k and so on and so forth.
p is followed by the sub-program number you are calling, and the usage is the same as m98. >>>More
Choose to enter safe mode, if there is no blue screen phenomenon, say that there is a problem with the obvious card or graphics card driver, clean up the graphics card, and then change to a graphics card driver, the latest driver is not necessarily the best. >>>More
I'll give you 10 sets of program debugging!
1.Go to the Internet ** a "read repair tool" to fix it, and the game can be played (note, check and kill viruses and Trojans, there are "read tools" on the Internet, there are viruses and Trojans)! >>>More