Is the inner cylinder material of the washing machine made of nano materials really antibacterial?

Updated on home 2024-03-07
26 answers
  1. Anonymous users2024-02-06

    Basically it doesn't work, it's just a propaganda tool.

  2. Anonymous users2024-02-05

    The washing machine nano sterilization is good.

    The differences are as follows: 1. The antibacterial effect is different.

    Nano sterilization has an antibacterial effect on E. coli at very low concentrations. However, the blue light sterilization effect is not good, and the antibacterial effect is average.

    2. The sterilization effect is different.

    Blue light sterilization does not kill all cells in the washing solution, especially those with thick cell walls. However, when the washing solution has water, silver, and light, nano-sterilization has a strong killing effect on bacteria and fungi at the same time under light irradiation.

    3. The materials are different.

    The application of nanotechnology in washing machines refers to the addition of nanomaterials to the inner and outer barrel materials or the surface coating materials of the inner and outer barrels, so that bacteria cannot survive on the barrel wall, so as to prevent the breeding of bacteria and achieve the purpose of antibacterial.

  3. Anonymous users2024-02-04

    In this case, it is relatively better than nano, and relatively speaking, its particles are good, and relatively small particles are better, and the sterilization ability is strong.

  4. Anonymous users2024-02-03

    Nano is better Nano is a processing process, which is different from the above sterilization methods. The main function of nano-treated materials is to keep the machine itself from becoming a source of pollution, and it will not directly have an antibacterial or sterilizing effect on the clothes. However, after the nano is applied in the material, how much can the effect be maintained, it is necessary to provide a test report issued by the National Nano Center to prove.

  5. Anonymous users2024-02-02

    Washing machine nano sterilization and blue light sterilization I think it is better to have blue light sterilization, because it will kill more carefully, so it should also be relatively good.

  6. Anonymous users2024-02-01

    I think it's better to use blue light sterilization in washing machines, which can effectively kill the mycogen.

  7. Anonymous users2024-01-31

    Washing machine nano sterilization and blue light sterilization are both very interesting sterilization effects, so it should be possible to try some things.

  8. Anonymous users2024-01-30

    Hello, the washing machine is better than the blue light sterilization. It's cost-effective, and it's also clean and hygienic.

  9. Anonymous users2024-01-29

    That's nano sterilization would be better. This kind of one works very well for that kind of mite and so on.

  10. Anonymous users2024-01-28

    Personally, I think the effect of nano sterilization of washing machines is better.

  11. Anonymous users2024-01-27

    It is better to have a first-level or nano sterilization.

  12. Anonymous users2024-01-26

    I think the disinfection and sterilization function is very necessary, because the washing machine is really dirty, many people may think that washing with water to clean the stains, sweat stains, oil stains, etc. seen by the naked eye is really clean, in fact, some invisible microorganisms, bacteria, etc. are not washed away, still attached to the clothes. My Casarte washing machine has sterilization function and drying function, which I think is particularly easy to use.

  13. Anonymous users2024-01-25

    1. The disinfection principle of disinfection washing machine: ozone is one of the strongest oxidants known at present, it is a broad-spectrum, efficient and rapid bactericidal agent, which has a strong killing effect on bacteria, viruses and microorganisms that cause disease to humans and animals, and its sterilization effect is equivalent to that of oxyacetic acid, stronger than formaldehyde, and the bactericidal power is twice as high as that of chlorine. The killing rate of Staphylococcus aureus and Escherichia coli is as high.

    Ozone will decompose into oxygen on its own in about 30 minutes at room temperature, so there is no residue and no secondary pollution. Ozone is easily dissolved in water to produce ozone water. The concentration of ozone water can kill bacteria when it is reached, and it can kill viruses when it is reached.

    The sterilization rate is 600-3000 times faster than chlorine and other sterilants.

    2. Ozone sterilization washing machines on the market add an ozone generator inside. Under the action of the sealing pipeline of the washing machine's water bucket and ozone, the ozone concentration in the washing liquid reaches the applicable value for washing clothes, and ozone water is formed by the interaction of ozone and water molecules to achieve the functions of deodorization and anti-sterilization of clothes. Ozone water also enhances the detergent's ability to decontaminate and improves the cleanliness of washing machines.

  14. Anonymous users2024-01-24

    Nothing works. The most effective way to sterilize clothes is to bask in the sun, with the help of the sun's ultraviolet rays. The other is to use disinfectant.

  15. Anonymous users2024-01-23

    Look at the use of the crowd, the clothes of adults actually don't matter, after all, adults, the resistance is still there, children's clothes are best to use sterilization, disinfection function to clean, because the south often rains, resulting in long-term dry clothes at home is easy to breed bacteria, washing machine is best to have disinfection and sterilization, drying function!

  16. Anonymous users2024-01-22

    Generally speaking, a newly bought washing machine should be disinfected every two or three months after it has been used for half a year.

    For washing machines that use non-metallic inner cylinders, you can put in an aqueous solution containing 300 500mg l of available chlorine, and after 3 5min of operation, the disinfectant can be drained clean, and then rinsed with clean water.

    For washing machines that use metal inner drums, put glutaraldehyde solution with a content of glutaraldehyde during disinfection, soak the inner drum for 10 15min and then drain the disinfectant solution, and then rinse it with clean water.

    For washing machines designed with heating devices, washing with hot water can also achieve sterilization. This is because mold is very sensitive to temperature, and the survival rate in water of 35 is very low, and almost zero in hot water of 45, so washing with hot water of 45 can also effectively kill mold.

    In the case of front-loading washing machines, a high-temperature program of 90 can be run regularly and completely once a month, which also serves as a disinfectant.

    For the inside of the washing machine, it is better to use descaling and sterilizing agents, and the operation steps are as follows:

    Step 1: Remove the drain pipe of the washing machine and close the water inlet valve.

    Step 2: Pour the special descaling and disinfectant into the washing machine, add water to a high level, but it must be 50 levels of hot water, mix it proportionally and stir well.

    Step 3: Press the power switch of the washing machine, set the program to "washing" mode, turn off the power after running for 10 20min, and soak for 20 60min.

    Step 4: Wait until a large amount of dirt has surfaced and drain the sewage. Then open the water inlet valve to add clean water, re-select the washing machine program, and then clean the filter screen after the program is completed, and the descaling and sterilization work is over.

  17. Anonymous users2024-01-21

    This is the secondary pollution of the washing machine, the dirt left in the inner cylinder is not completely discharged with the sewage, some are attached to the inner wall of the washing machine, year after year, there is already a large number of bacteria on the inner wall of the washing machine, with the increase in the number of times you wash clothes, it will increase. Even when washing separately, the repeated washing process of underwear and outerwear also increases the number of bacteria. "Washing in the washing machine is actually the process of transmitting certain bacteria to the next tube of clothes, and some bacteria may not be eliminated even if they are dried, especially close-fitting underwear.

    To deal with the secondary pollution of washing machines, first of all, the washing machine should be placed in a ventilated and bright place; Secondly, underwear is washed separately from the coat to reduce cross-contamination of the clothes. Finally, after washing clothes, the lid of the washing machine should be opened for ventilation for a period of time, so that the inside can be kept dry to promote the volatilization of residual moisture and inhibit the growth of microorganisms, and the clothes should be taken out immediately to dry outside, not stuffy inside. If possible, the washing machine can be cleaned regularly after three months or six months of use.

    You can buy a special cleaning disinfectant for washing machines.

    In this way, the stubborn dirt and stains of a large amount of anti-anionic active agent accumulated due to long-term use in the inner tank of the washing machine and the interlayer tank of the washing machine can be completely removed. Quickly removes mold and effectively removes odors caused by internal dirt.

    How to use: 1. Fill the washing machine with water (to a high position, do not put clothes) and pour 1 package of this agent (the water temperature is better than 40);

    2. Turn on the washing machine and set it to run for 4-5 minutes to fully mix and dissolve the agent;

    3. Temporarily put down the drain pipe, release a small amount of water (about 2 liters) and hang it up, and then add water to the full position;

    4. Leave for 2-4 hours to fully soak stubborn stains;

    5. Then turn on the washing machine, run it once in standard mode, and drain the clean water to complete the cleaning.

  18. Anonymous users2024-01-20

    Hello, I'm glad to answer your question, washing machine disinfection and sterilization, in fact, the method is still very simple, you can follow the following steps: 1. Prepare an appropriate amount of baking soda and a bottle of white vinegar. 2. Adjust the washing machine to a high water level, fill the washing machine with water and add an appropriate amount of baking soda and white vinegar.

    3. Turn on the button of the washing machine to make the washing machine run, there will be foam in the washing machine, and the color of the water will become dirty the longer the time -20 minutes later, after cleaning, click the dehydration button of the washing machine to drain the water in the washing machine. 5. If there are stains left, you need to drain the water again, and just clean and discharge the stains in the washing machine.

  19. Anonymous users2024-01-19

    1. First of all, buy some special washing machine disinfection tools, such as bleach, etc.

    2. Adjust the washing machine to a high water level, and wait until the inside of the washing machine is filled with water before adding bleach, or detergent and other utensils for cleaning the washing machine.

    3. Wait until foam gradually appears in the washing machine, which means that the detergent in the washing machine is beginning to dissolve.

    4. After waiting for about 20 minutes, the bleach will gradually clean the dirt in the washing machine. At this time, turn on the stirring and dehydration button of the washing machine and wait until the water in the washing machine is drained.

    5. After the water in the washing machine is finished, there will be a certain amount of dirt left at the bottom of the washing machine, so you need to release the water again to clean and discharge the stains in the washing machine.

  20. Anonymous users2024-01-18

    Supermarkets sell detergents that are specially used for cleaning washing machine barrels, and you can use them according to the instructions to not only disinfect them, but also to peel off the sediment that adheres to the inner and outer barrels.

  21. Anonymous users2024-01-17

    There should be a washing liquid for cleaning washing machines, and supermarkets should have it.

  22. Anonymous users2024-01-16

    There is now a powder for cleaning washing machines in supermarkets... That brand also has the air conditioner and the bathroom potion hungry... It is to prevent the secondary pollution of household products. . .

    I use 2 packs of that powder for the first time. . . There are specific instructions on it.。。。 After that, use it every 3 months or so... It's all the same thing as the old pit... It's dirty...

  23. Anonymous users2024-01-15

    First of all, pour the inner barrel of the washing machine with warm boiled water, then find some outer clothes to soak in Dettol or Velux disinfectant to let the washing machine run once, and after washing, the washing machine can be ventilated and dried on the veranda.

    However, because the washing machine itself can also produce mold, it is recommended that daily laundry should be done with Dettol or Velux disinfectant detergent to be hygienic and hygienic.

  24. Anonymous users2024-01-14

    Just wash it with 84.

  25. Anonymous users2024-01-13

    In fact, the dirt accumulated from the long-term use of the washing machine should be paid attention to, first of all, the washing machine barrel is damp, easy to breed bacteria, and secondly, in the washing powder, especially soap or liquid soap contains grease components, these greases will be adsorbed on the inner barrel wall, the longer the washing machine is used, the more grease will be, and if the washing machine is not cleaned for a long time, it will easily lead to secondary pollution, and even more can cause symptoms such as allergies, so even if it is not mixed with other people's clothes, the machine should be cleaned regularly.

    Provide a cleaning method: fill the bucket in the washing machine with water, pour about 300 grams of oxidizing bleach (purchased at a supermarket or chemical supply store), soak for 2 hours, and then choose to start running once.

    If the inner bucket is already dirty, you can use this method to wash it several times. The general washing machine only needs about three months to clean and maintain according to this method. The washing machine with the bucket cleaning function can be operated directly according to the bucket cleaning method.

    You can also contact a professional washing machine cleaner to clean up.

  26. Anonymous users2024-01-12

    We all have this experience in our daily life: after a washing machine has been used for a long time, there will be a musty smell at the bottom of it. It turns out that the environment inside the washing machine is very humid, and after a few days of inactivity, a large number of bacteria will grow and contaminate the clothes to be washed next time.

    In the long run, it is possible to produce cross-infection and cause various ** diseases.

    With the improvement of living standards, people's health awareness and environmental awareness have been continuously strengthened. People are no longer satisfied with the primary cleaning of clothes, and the requirements for washing machines have been raised to a new stage, namely: ultra-clean, healthy and environmentally friendly.

    In addition, with the gradual rise in temperature, various germs have entered a rampant period of breeding, reproduction and spread, and healthy washing is particularly important during this period.

    But the inside of the washing machine is sealed, we can't take it apart, and we can't scrub it often, what should we do? For a long time, how to solve the cleaning problem of the washing machine itself has become a difficult problem for many washing machine manufacturers.

    In this case, the duckling group applied the new technology of "nano" to the development of washing machines, thus advocating a new concept of laundry.

    What is a "nano" washing machine? Before understanding nano washing machines, we should first understand what nano is. The so-called nanometer (nm) is a unit of length measurement, one nanometer is one billionth of a meter, and nanomaterials are new materials developed by regulating the structure of matter within the nanometer order (1nm-100nm).

    Nanotechnology refers to the technology of manipulating atoms, molecules, clusters of atoms, or clusters of molecules to rearrange them into new substances at the nanoscale.

    Due to the unique physical and chemical properties and wide application prospects of nanomaterials, they have attracted great attention from the scientific and business circles at home and abroad in recent years. As early as 1991, the famous scientist Qian Xuesen predicted: "Nanotechnology is the focus of scientific and technological development in the 21st century and an industrial revolution."

    The research and preparation of nanomaterials have been "hidden" in the laboratories of a few scientists for more than 20 years, and their application in washing machines is even rarer. The duckling group, which has always dared to innovate, has long been carefully researched as a reserve project, and after more than 700 days and nights of research and development, it finally launched the duckling nano 426 washing machine. The duckling nano washing machine is the application of nanotechnology to the outer barrel of the washing machine, and the successful development of the inorganic silver composite outer barrel not only increases the toughness, has the characteristics of friction resistance and impact resistance, but also has a good finish and strong anti-scale ability, prevents dirt from being deposited on the barrel wall, and keeps the washing machine itself clean.

    The duckling nano washing machine has become a washing machine boutique that is generally optimistic this summer because it meets the needs of consumers for healthy washing. It applies new nanotechnology, making this high-tech product, known as "cross-century new material", more widely used in people's daily life, thus opening up a new era of healthy laundry for Chinese people.

Related questions
15 answers2024-03-07

My wife told me that because the bathroom at home is small, she wants to buy a drum washing machine to put outside the kitchen or balcony. It was the first time she had used a front-loading washing machine, so she didn't know how it drained, which annoyed her because every time she did her laundry, the house felt like a lot of water. Therefore, I consulted with the master for her, and found out that the original method of use is like this. >>>More

6 answers2024-03-07

There is a knack for washing clothes in a washing machine, and there is no one to wash them cleanly. >>>More

11 answers2024-03-07

First, generally speaking, after half a year of use, the newly bought washing machine should be cleaned and disinfected every two or three months. >>>More

15 answers2024-03-07

2.When buying, the whole process of testing the machine, listen to the water inlet valve when the water is not too noisy, and when the water is enough for washing, the wave wheel rotates smoothly and forcefully, without the sound of the jam machine, no mechanical wear noise, and the drainage pipe does not leak. When draining, the water output is large, there is no blockage, and the DC drain valve will knock, which is normal. >>>More

8 answers2024-03-07

Buy a Siemens front-loading washing machine!

The drum washing machine is hung high drainage, no matter how far away it can drain water. The original water inlet pipe and drainage pipe are one meter and two long. But you can all lengthen it as needed. >>>More