What is the reason why MSI laptops can t enter the system?

Common laptop failures - unable to enter the system when turned on.

Today I will introduce to you the process of solving the laptop failure - the system cannot be entered after booting.

Unable to enter the system at boot is a fault in the process of everyone, most of this kind of failure is the setting of the computer itself and other problems that are not suitable for installation, the laptop is a very sensitive model, for subtle situations will cause a certain inconvenience to use, here we need to pay attention to it.

Method: 1. If you encounter a boot that cannot enter the system, you can first enter the safe mode of the computer for anti-virus, this kind of anti-virus is best to use some more advanced anti-virus software, do not use those free anti-virus software, after the anti-virus, this kind of problem is generally solved quickly.

2. If this method does not work, you can read and write the BIOS socket of the laptop if there is an error, and the system will not be able to react to such a phenomenon, you can use the coder to write the BIOS update file into the BIOS, so that you can solve your problem.

3. Reinstalling the system is also a solution to the problem of not being able to enter the system at boot, because system file damage is a common occurrence, at this time, we can reinstall the system can not only repair the fault of the laptop itself, but also make the laptop completely clean up the system, it is still worth trying. To learn to reinstall the system, you can click (how to make a USB flash drive, boot disk, install the operating system, and include ** address).

4. If the computer fails to turn on, it is likely that there is a problem with the hard disk. At this time, we must take the computer to the store for repair, because the hard disk must not be moved, once the hard disk is damaged, your computer data will be completely lost. So if you send it for repair as soon as possible, it may be possible to protect the data!

5. If the laptop cannot be turned on, it is likely that there is a problem with the power supply position, and if the power supply pressure is unstable, it will cause a short circuit in the laptop. To avoid laptop damage, everyone must pay attention!

It can be done.

1.Turn on the computer without pressing the del key, set the BIOS, restore the default settings to save and exit, select load optimized defaults, F10 save and exit.

2.The cause of the problem is that the memory module or graphics card gold finger is oxidized or the slot is not in good contact, which causes the computer to fail to boot up. Solution:

You can turn off the power first, open the computer case, dial out the memory module, wipe it back and forth a few times with the rubber against the part of the gold finger (that is, where there is a copper sheet,), and then insert it back into the memory slot, and you're good to go. If you can't turn on the computer after doing this, you have to check the graphics card, indicating that it is a problem with the graphics card, and it is also good to do it vertically in the same way as above, and you can do it.

3.Turn on and press F8 without stopping, enter Advanced, select the last correct configuration, OK.

You try the above three methods. If that doesn't work, reinstall the system.

Open "Network Neighbors", and then "Network Connection", and see that only "Broadband Connection" is available, and the local connection is gone.

Right-click "My Computer" "Management" "Device Manager" and see that there is no "Network Adapter" in it. When the above two symptoms are met at the same time, it is the solution to the hole roll. Open "Run" and enter the command interface. Enter regsvr32.

Press enter to confirm. Enter regsvr32. Press enter to confirm.

Enter regsvr32. Press enter to confirm. When you're done, restart your computer.

After restarting, check that the local connection of the network connection is back, and the network adapter is also back, and the normal Internet access is restored.

**After the software finishes the software, open it normally ("one-click reinstall the system"), the program will detect the current system environment by default, and click "Next" after the detection is completed. Users can also choose Win7 or Win10 and click "Next". At this point, the user can leave the computer and the reinstallation process will be fully automated.

In order to prevent installation failure, users can also select "Make Boot USB Disk" to install the USB flash drive. Automatically restart the installation.

Open "Network Neighbors", and then "Network Connection", and see that only "Broadband Connection" is available, and the local connection is gone.

Right-click "My Computer" "Management" "Device Manager" and see that there is no "Network Adapter" in it. When both of the above symptoms are met, the solution is the solution. Open Run to enter the command page. Enter regsvr32.

Determine by entering the car. Enter regsvr32. Press enter to confirm.

Enter regsvr32. Press enter to confirm. When you're done, restart your computer.

After restarting, check the local connection of the network connection trembling empty is back, and the network adapter is also back, and the normal Internet access is restored.

**After the software is finished, open it normally ("one-click reinstall the system"), the program will detect the current system environment by default, and click "Next" after the detection is completed. Users can also choose Win7 or Win10 and click "Next". At this point, the user can leave the computer and the reinstallation process will be fully automated.

In order to prevent installation failure, users can also select "Make Boot USB Disk" to install the USB flash drive. Automatically restart the installation.

First: Restart, don't press any button after restarting, see if you can recover by yourself.

Third: There is really nothing to be done, just reinstall, start with a USB flash drive with a USB flash drive, and then enter the win pe backup data and reinstall the system!

1.Turn on the computer without pressing the del key, set the BIOS, restore the default settings to save and exit, select load optimized defaults, F10 save and exit.

2.The cause of the problem is that the memory module or graphics card cheat is oxidized or the socket is not in good contact, which causes the computer to fail to boot up. Solution:

You can turn off the power first, open the computer case, dial out the memory module, use the eraser to wipe the part of the gold finger (that is, the place where there is a copper sheet) back and forth a few times, and then insert a memory slot back in, and you're good to go. If you don't turn on the computer after doing this, you have to check the graphics card, explain that it is a problem with the graphics card, and you can do it in the same way as above.

3.Turn on and press F8 without stopping, enter Advanced, select the last correct configuration, OK.

You try the above three methods. If that doesn't work, reinstall the system.

The laptop won't turn on.

1. Check whether all the plugs of the power supply and the wires on the adapter of the notebook are firmly inserted into their respective sockets, if not, it means that the contact with the power supply is poor, just press the plug down again.

2. Check whether there is dirt on the interface of the battery and the plug of the power cord, if there is, it is because of these dirt that the power is blocked, take out the battery or pull the plug off, wipe it with a clean cloth and then turn on the power supply.

3. Use the battery of the notebook and the external power cord for power supply. Turn on the machine, check whether the power indicator is lit, and then make a judgment to see if it is a problem with the battery or an external power supply.

4If you are not using AC power and the battery is too low, it may not turn on, please plug in AC power or charge the battery before trying again.

The fault performance of not powering on is: the laptop can't turn on, that is, the indicator light doesn't light up after pressing the on-off key, the fan doesn't rotate, and the computer doesn't respond at all. This kind of failure is generally more serious, common in motherboard failure, damage to major components, liquid ingress into the machine, etc.

The notebook cannot access the cause and solution of the resistant system.

1. The computer is damaged due to damage to the hard disk.

2. If the BIOS is faulty, it needs to be processed by entering the system, and it is not recommended to deal with it immediately.

3. Memory module.

In case of failure, it is necessary to replace the regular memory module.

4. The system file is damaged and the system needs to be reinstalled.