What do the various faulty lights in the car mean?

The car dashboard is a device that reflects the working conditions of each system of the vehicle. Common ones are fuel indicators, cleaning fluid indicators, electronic throttle indicators, front and rear fog light indicators and alarm lights. The fault on the dashboard of the car can not only monitor the condition of the vehicle in real time, but also the most direct manifestation of the driving state of the car.

The most complete collection of car fault lights in history, I hope it will be helpful to all car owners. Really recommend collecting it!

Generally, there are 4 colors of car indicators: red, yellow, green and blue; Different colors have different meanings. Do you know?

Red indicator (hazard).

The red indicators are all fault warning lights, so if you see the car indicator light turning red, you need to stop driving immediately, and immediately clear the fault and repair it immediately. The red warning lights mainly include: oil pressure warning light, engine temperature warning light, charging warning light and brake fluid level warning light.

Yellow indicator light (early warning, precaution).

The appearance of the yellow indicator light means that there is a safety hazard in your vehicle, such as a broken light bulb on the car, the "bulb warning light" will continue to flash to prompt replacement, as well as engine (exhaust system) fault lights, oil system fault lights, battery and power generation system fault lights, etc. When the yellow indicator light is on, the owner should pay attention and deal with the repair at the appropriate time.

Green indicator light (safe driving).

The green indicator is the function indicator of the vehicle, which is generally the status indication of the vehicle's function, indicating that the function is on or off, for example, the turn signal flashing when turning is green.

Blue indicator light (reminder, need to pay attention).

Like the green indicator, the blue indicator of the high beam indicator and the internal circulation indicator can generally also play a role in prompting the working status of each function of the vehicle. For example, if the high beams are blue when they are turned on, you need to pay attention to whether the high beams affect other vehicles.

The picture below is a partial general-purpose fault light**:

Generally, there are the following reasons: 1. The sensor is damaged, the contact is poor or the signal is interrupted; 2. Poor engine maintenance; 3. The quality of fuel and oil is not good; 4. The combustion of the mixture is insufficient; 5. Spark plug failure, ignition coil failure; 6. The fuel pump is faulty and the oil circuit is blocked; 7. The air conditioner filter is blocked.

The specific situation is analyzed as follows; 1. Sensor problems; The sensors mentioned here include water temperature, crankshaft position, air flow, intake air temperature, oxygen sensor, etc., when these sensors are damaged, poor contact or signal interruption, the ECU of the car can not accurately obtain the engine data, at this time it will cause the engine fault light to turn on. 2. Maintenance problems; Poor engine maintenance is the most common cause of engine failure to light up. We know that the vehicle has a certain maintenance cycle, if the owner does not maintain on time, coupled with bad driving habits, then it will increase the burden of engine operation, and finally can only remind you through the fault light to care about your car 3, oil quality problems; The oil quality here includes fuel and engine oil, we know that the fuel filled by the car is generally marked, and the engine oil is also semi-synthetic and fully synthetic, the manufacturer will generally recommend the owner to use which grade of fuel, which type of engine oil, if the owner does not add as required, it will cause wear and tear of the engine in the long run, and the fault light is not to blame.

Poor combustion of the mixture; The failure of the spark plug, ignition coil, fuel pump, and oil circuit blockage of the engine will cause poor combustion of the engine mixture. Poor combustion of the mixture is caused by the problem of engine carbon deposition or knocking, and these will eventually be detected by the engine's oxygen sensor and reported to the ECU, which will naturally turn on the fault light to warn of the intake air intake problem; When the engine burns, it needs to take intake, the air filter element is very important in this process, if the air filter element of the car is not clean, it will affect the air intake of the car if it is not cleaned regularly, and it will be blocked for a long time, and if it is serious, it will cause the engine failure light to turn on. The extender can also cause the engine failure light to come on.

The car fault light indicates that when the vehicle is ready to start, there are some faults in the vehicle, and the car dashboard indicator light will be on or flash red to indicate danger, yellow to indicate failure, and green to indicate normal operation.

This is the engine fault light, it is recommended to go to the 4s or repair plant to read the fault code to locate the fault, only by looking at the fault code can you know what fault pro!

There are too many design contents for this problem, and the fault lights are not the same for different cars. It's best to search for "Car Fault Lights" to find out. Or go to the official websites of major automobiles to find out.

There are 5 common fault lights in the car dashboard, and the fault lights are on, not necessarily all of them are "faults"!

Generally, EFI cars have engine fault lights, automatic transmissions and gearbox fault lights, airbag fault lights, brake system fault lights, brake fluid fault lights, anti-lock failure lights, high-end cars have VSC traction system fault lights, tire pressure low fault lights, brake pad fault lights, water temperature too high fault lights, insufficient coolant fault lights, brake fluid bottom fault lights, and so on.

It's a lot, it's all in the manual when you buy a car.

The car warning indicator means the following:

1.**Indicator: Preventive overall safety system failure.

2.Braking device: The braking system is faulty, please stop safely.

3.Electromechanical parking brake: The parking brake is taut.

4.Cooling system: Turn off the engine and check the coolant level.

5.Engine oil pressure: Turn off the engine, the oil pressure is too low.

6.Engine Oil Level (Minimum): Please add engine oil.

7.Generator: The power system is faulty, please stop safely.

8.Seat belts: Seat belts are not tightened.

9.Electro-mechanical steering: Failure of the electronic steering system.

10.Steering locking device: Steering locking fault.

11.Engine starting system: Engine failure.

12.Transmission (automatic transmission), clutch (manual transmission): Transmission failure.

13.Engine Compartment Cover: The engine compartment cover is not closed.

14.Adaptive Cruise Control: Adaptive cruise control system failure.

15.Traffic jam assist: The driver does not take over the steering.

16.Electronically controlled driving stability system: ESC failure.

17.Brake anti-lock braking system ABS: ABS failure.

18.Tire pressure: The tire pressure is too low.

19.Exhaust gas monitoring system: Exhaust gas quality deteriorates.

20.RPM Limiting System: Excessive RPM Warning.

21.Battery level: The battery level is too low.

22.Fuel tank system: Please add fuel.

23.Cleaning water level: Please add glass cleaner.

24.Window wipers: Damaged window wipers.

25.Key-fob: The key-fob was not found.

Illustration of various warning lights of automobiles:

1. Oil alarm light, the shape of this fault lamp seems to be a teapot, if the fault light is lit on the dashboard, then it means that the oil in the engine is insufficient, and it needs to be replenished in time, if you continue to drive forward, then the wear of the engine will be greatly increased, because the lubrication effect will not be very good in the case of insufficient oil volume. Severe cases may result in engine damage.

2. Engine fault light, under normal circumstances, this light is yellow, once it is lit, it proves that the engine may be faulty but the vehicle can still drive. It is advisable to check the engine for troubleshooting as much as possible. However, in the process of daily use of the car, as long as the maintenance is in place, the engine is not short of oil, coolant, and there is no gasoline of the wrong label.

In this case, if you turn on this light, most of them are false positives from the system. The reason for the false alarm of the system may be that the whole car is powered off and the battery is replaced, or the battery voltage is too low.

3. Brake system fault lamp. The brake system fault light is shaped by an exclamation mark and a letter P wrapped in a circle. If this fault light is on, it means that there is a problem with the car's braking system.

Please get out of the car for an inspection and repair it promptly. Because the brake system of the car plays a vital role in the safety of the people in the car, if there is a problem, the people in the car will be in danger.

4. Tire pressure warning light, when the tire pressure warning light is on, it means that the tire pressure is abnormal, which may be low or high. One of the greater safety hazards is the vehicle puncture, if the vehicle has a puncture when driving, the consequences are unimaginable.

5. Water temperature warning light, when the water temperature warning light is on, it means that the engine temperature is too high. The essence of the engine is that the heat dissipation effect of the engine is not good, and it is necessary to stop and check the vehicle for failure, and if you continue to drive, it may cause damage to the engine.

6. Battery warning light, if this fault light is on, it means that the battery of the vehicle is faulty, which affects the use of electrical equipment on the vehicle. So when you see the battery alarm light on, you should go to the repair shop in time to deal with it.

Car fault lights are related to each computer module of the vehicle, if the relevant computer module system fails, the relevant fault lights will be lit, such as engine fault lights, ABS anti-lock braking system fault lights, once lit, some systems will quit work, and remind the driver to carry out relevant maintenance work as soon as possible.

It is obvious that there are doors that are not closed tightly or closed.

What do car fault lights mean? The old driver explained the reason why the fault light was on, which was very useful.

It should be a warning that the car door is open.

Pre-collision braking system failure, pick up the car on the 3rd day when waiting for the traffic light at the intersection, accidentally stepped on the wrong step, put the accelerator as a brake, is this system emergency braking, otherwise it will be rear-ended, May Day on the high-speed entrance ramp to accelerate to 70, there is no car in front, but the dashboard suddenly prompts red pre-collision emergency braking, flashing, but there is no real braking, scared out of the cold.

1. Battery indicator.

The battery indicator is used to show the working status of the car battery, and its color is usually red or yellow. Twist the key, the indicator light will light up when the vehicle performs self-inspection, and the indicator light will automatically turn off when the car is started.

2. Engine indicator.

The engine indicator is used to show the working status of the engine, and its color is mainly yellow. Twist the key, the indicator light will also light up when the vehicle performs self-inspection, and the indicator light will automatically turn off when the car is started.

3. ABS indicator light.

ABS indicator light is used to show the working status of the vehicle's ABS system, and its color is mainly yellow. Twist the key, the indicator light will light up when the vehicle performs self-inspection, and the indicator light will automatically turn off when the car is started.

4. Oil lamp.

The oil alarm light is usually caused by low oil pressure or damage to the oil pump. The pressure sensor monitors the oil pressure status of the car at all times. Too low oil pressure can cause problems with lubrication or even dry friction, leading to engine damage.

The oil alarm light is on, and it must be repaired in time.

5. Water temperature alarm indicator.

When this light is on, first pull over and turn off the engine immediately, check whether there is a lack of coolant, or the water temperature is too high, and then replenish the coolant or continue driving when it cools to the normal operating temperature of the engine.

The car fault indicator is a safety alarm device, every time the vehicle starts, it will self-check, the icon in the middle of the dashboard will light up, and it will automatically go off after a few seconds, when the self-test process is completed, the fault icon will continue to light up, prompting the driver to pay attention.

One of the common fault lights: water temperature indicator.

The water temperature indicator is used to show the temperature at which the coolant circulates in the vehicle's engine. When the vehicle is started for self-test, the water temperature indicator lights up, and if the water temperature is normal, it will be actively extinguished when starting. If the startup is not extinguished, two colors of the indicator light will appear:

A blue light indicates that the water temperature is too low, while a red light indicates that the water temperature is too high.

The second common fault lamp: ABS indicator light.

The ABS indicator is used to show the working status of the anti-lock braking system. When the vehicle is started for self-test, the ABS indicator light will be on, and if the ABS system is normal, the start will be actively extinguished. If the ABS indicator does not go out, it may be because:

There is a failure inside the ABS pump; Or the ABS sensor is damaged or obstructed by other items.

Green, blue, and white indicator: Generally speaking, it is the status indication of the vehicle function, indicating that the function is on or off;

Red indicator: Generally a serious warning, the vehicle has a serious failure or is in a dangerous state, and needs to stop driving immediately, and immediately clear the fault and repair it immediately. (Photo by Li Yan of Pacific Automobile Network1).

Summary. Hello dear, the car fault light is a kind of safety alarm device. Every time the vehicle starts, it will self-check. The icon in the middle of the dashboard lights up and automatically closes after a few seconds. After the self-test process is completed, the faulty icon will continue to light up to alert the driver.

What does this car malfunction light mean?

Hello dear, the car fault light is a kind of safety alarm device. Every time the vehicle starts, it will self-check. The icon in the middle of the dashboard lights up and automatically closes after a few seconds. After the self-test process is completed, the faulty icon will continue to light up to alert the driver.

The icon of the car fault light has a corresponding fault performance, and the engine self-test indicator light will light up every time the car starts, indicating that the engine is undergoing self-test. Oil pressure indicator: The oil pressure indicator is used to indicate whether the oil pressure is normal or not. The refueling indicator can remind the driver of the vehicle to refuel the vehicle in time.

Every time the vehicle starts, the icon in the middle of the dashboard lights up and turns off automatically after a few seconds. This process is the self-inspection process of the car. After the self-test is completed, the corresponding icon will turn off, and the faulty icon will continue to light up, prompting the driver to pay attention.

The normal driving of the vehicle is the lack of oil and water. Attention should be taken when these indicators are on.

You're not right, the oil pressure indicator is a dripping oil can. The ** I sent is a long square.

Dear, the system is now being upgraded, and I haven't received your ** here, you're taking a look.

Look at whether the key is not in the car.

Have you read the ** I first posted?

I asked the **.

I can't get ** here.

There's a little bit of a little inside the rectangular cube, and there's a lot of it.

If you don't know to find my question, there is a ** I sent.

Is it 4 dots.

Sort of. There are four dots around the middle of a car.

If yes, it's the parking assist indicator.