How to install G510 USB flash drive to install Windows system?

You can reinstall the system according to the following steps.

1.Press the F2 button to enter the BIOS settings interface and select Advanced BIOS Features;

2.In the Advanced BIOS Features interface, first select Hard Disk Boot Priority;

3.Hard Disk Boot Priority Selection: Use the plus and minus signs "+" on the keypad to select the mobile device, and select the USB flash drive on top. Then, press the Esc key to exit;

4.Then select First Boot Device: Select USB flash drive to boot.

5.Then reboot to start the step-by-step installation, and the installation process will be restarted several times.

Hello:1win8 set up the first way to boot the U disk: from the Windows8 system in turn "Computer Settings" - Advanced Boot "reboot" to enter the interface of BIOS settings!

When entering the win8 system desktop, fingers from the right side of the screen to the middle of the slide or directly press the "win+i" shortcut key combination to open the win8 system of the charm button "charm bar", and then click "change computer settings", and then enter the "computer settings" - general", there is an advanced startup function at the bottom, activate the immediate restart button, when the computer restarts, we can see the "choose an option" interface, and then select "troubleshooting", and then see three options, We click on the "Advanced Options" at the bottom, and then we can see the "UEFI firmware settings" - this UEFI firmware setting is a BIOS specification launched by Intel, and finally we can start to restart the computer, when the computer restarts, the system will automatically enter the BIOS settings interface!

2WIN8 set up the second way to boot the USB flash drive: you can enter the BIOS setting interface by modifying the power option!

Specific operation: Left or right click the power icon in the lower right corner of the desktop, then enter the power options, and then click "Password is required when waking up". Of course, this method of change cannot be changed directly, you need to click "Change settings that are not currently available" at the top of the following page before you can change it!

3 Win8 set up the U disk to boot the third method: we can also enter the BIOS settings by forcing the shutdown!

The so-called forced shutdown means that we directly press and hold the power button on the computer host for about 6 seconds with our fingers to force the computer to shut down!

When we enter the BIOS settings, find the LEGACY and UEFI options, and then select LEGACY to enter the USB flash drive to boot!

You need to press F2 to enter the BIOS, turn off UEFI and then press F12 to boot.