How can glazed bricks be wiped clean, and how should glazed bricks be cleaned and maintained?

Cleaning and maintenance methods of glaze:

1. Tea stains, fruit stains, coffee, sauce vinegar, leather shoe prints and other stains can be used with sodium hypochlorite diluent (bleach), soaked for 20-30 minutes and then wiped with a cloth; Some stains that have been infiltrating the brick for a long time can be soaked for several hours.

2. For mildew spots formed by mildew of ink and antifouling wax, use sodium hypochlorite diluent (bleach). To use, simply apply bleach to the stain and soak it for a few minutes to wipe it off.

3. Use hydrochloric acid or phosphoric acid solution for cement, scale, rust and rust spots, and wipe it several times.

4. Use alkaline detergent or organic solvent (and 5 ketones, triethylene) to remove paint and degreasing agent for paint, oil, oily marker, and surface antifouling wax layer.

5. How to use the rubber hammer mark for decontamination: first soak it in 20%-40% sodium hydroxide solution for 24 hours and wipe it with a cloth, and then soak it in 30%-50% hydrochloric acid solution for 30 minutes and wipe it with a cloth.

6. If the stain caused by ice cream is used, it can be cleaned with alkaline detergent.

7. If lime stains are accidentally caused during decoration, you can use acid detergent to clean them.

Full glaze is a kind of special formula glaze that can be polished on the glaze surface, it is the last glaze applied to the antique brick, at present it is generally transparent glaze or transparent convex glaze, the full glaze brick applied to the full glaze set the advantages of polished brick and antique brick, the glaze is smooth and bright like polished brick, and its glaze color is rich in pattern like antique brick, and the color is thick or gorgeous.

If there are stubborn stains, they need to be cleaned with professional cleaning agents to prevent hard objects from damaging the surface of the tile, and do not carry out other operations on the brick surface without a protective layer.

Rub slowly with a mantle of water, it's easy to rub.

1. In maintenance, it is necessary to apply antifouling wax regularly according to the use of the application, and it is usually advisable to apply antifouling wax at an interval of 3 to 4 months. Air drying and then polishing will keep the brick surface as bright as new, and if economic conditions allow, a crystal surface treatment can be used to achieve the desired effect.

2. Use soap and a little ammonia or the same amount of flaxseed turpentine mixture to remove stains stronger, so that the full glazed tiles can be wiped more shiny. For example, if there are a few scratches on the surface of the glazed brick, you can rub a little toothpaste on the scratches, and then wipe it vigorously with a soft cotton cloth, or you can remove some small scratches on the glaze.

3. If you use nail polish, you should wipe the tiles clean before wiping, so that the effect will be better. It is also possible to use waxing, which can have the effect of lightening the scratches on the tiles. It is good to use oxalic acid to repair tile scratches, and the specific operation method is:

Use a soft rag dipped in oxalic acid and wipe vigorously to repair tile scratches.

1. Toothpaste cleaning method. Since the surface of the tile is smoother, it is relatively easy to clean, we just need to dip some toothpaste with a damp rag and clean it. For the gaps in the tiles, we can also use the same method, squeeze out an appropriate amount of toothpaste onto the toothbrush, brush repeatedly in the direction of the tile gaps, and then rinse with water, and the tile gaps will be as white as ever.

2. Candle cleaning method. In addition to detergents, we can also use candles to help with cleaning. This is because the surface of the candle is smooth, and even if the tiles are covered with oil, we only need to wipe the candle lightly and it will be clean.

The specific operation is as follows: we gently apply the candle to the seams of the tiles, first vertically, so that the candles can be evenly applied at the seams; Then apply it horizontally, so that the thickness of the tile is equal to the thickness of the candle. If you can use toothpaste to scrub the grease directly from the tile joints behind your kitchen stovetop, and apply candles to the joints, you can make the tile joints not stained with oil, and even if they do, they are easy to remove.

3. Detergent and soap cleaning method. We can prepare some soap or dish soap and mix them with ammonia or turpentine, which will make it easier to clean the tiles, and the cleaned tiles will be more shiny. If there are scratches on the surface of the tiles, we can apply toothpaste to the scratches and wipe them with a dry cloth to repair them.

How to repair glazed brick scratches in three monthsGlazed bricks are all scratches - toothpaste. If the glazed bricks in your home are only slightly scratched and do not damage the inner structure, we can apply toothpaste around the scratches, then wipe them clean with a dry towel, apply some wax oil, and wipe them dry with a clean cloth. The glazed bricks were all scratches - waxing.

If the condition is not serious, you can apply a layer of wax on it, which will have the effect of lightening the scratches. The glazed bricks thrown in three months are all scratches - the replacement method. If the situation is more serious, it can be replaced with new tiles so as not to affect the overall appearance.

The glazed bricks thrown in three months are all scratches - paint, nail polish.