How to clean up the carbon deposits of the car by yourself, how to clean up the carbon deposits of t

How carbon deposits are formed.

Why is carbon deposited generated? This is because the fuel itself contains gum, impurities, dust, moisture, etc., which accumulate over time to form sludge and other deposits in the fuel tank, oil inlet pipe, etc.; Secondly, due to the oxidation and polymerization reaction of unstable components such as olefins in gasoline at high temperatures, colloidal and resinous viscous substances are formed, which stay in the fuel injector, air intake valve and other parts, and the deposits will become hard carbon deposits when burned.

In addition, traffic congestion, cars are often at low speed and idling, which can aggravate the formation and exacerbation of carbon deposits and sediments. If the carbon deposit is not cleaned in time, the carbon deposit and sediment will block the injector needle valve and valve hole, resulting in the intake valve not being closed tightly, the cylinder pressure dropping or even tempering, resulting in unstable engine idling, increased fuel consumption and deterioration of exhaust emissions. Carbon deposits on the piston top and cylinder head can easily cause local overheating of the combustion chamber and gasoline preheating, resulting in engine knocking and other failures.

These failures can shorten the life of the engine.

How to judge the organic carbon of a car? When the car has the following conditions, it can be judged that the carbon deposition of the car is more serious:

1. It is not easy to start when the cold car is ignited many times, and it is normal when the car is hot;

2. The engine idle speed is unstable, and the speed is high and low;

3. The driving feeling is weak and stuffy, especially when overtaking, and the speed response is slow, which is very different from the new car;

4. The exhaust of the car is pungent and the emission exceeds the standard;

5. The fuel consumption of the car has increased a lot compared with before.

How to clean up the best way to clean up carbon deposits in automobiles.

Generally, the commonly used methods are: dismantling and washing, hanging bottle cleaning, and fuel additives.

1. Dismantle and wash. This method is very direct and rude, but it is generally sent to the 4S store for disassembly, the disassembly of the engine is more complicated, no matter what parts will affect its performance more or less every time it is disassembled, you need to ask a professional master to disassemble. The carbon deposits in the engine can be seen directly when dismantled and washed, and the cleaning will be relatively clean.

However, the cost will be relatively high, and it will also require technology.

2. Hanging bottle cleaning.

This method is also relatively common, the hanging bottle is to discharge the cleaning agent into the air intake, dilute and soften the carbon deposit to turn it into a slurry, and then burn it from the cylinder to discharge. Generally, the cleaning objects include the intake tract, throttle, intake valve, fuel injector, cylinder inside, etc., but the effect is not as direct and obvious as dismantling and washing.

3. Fuel additives.

The main function of additives is to drill into the pores of carbon deposits with the help of strong surface activity, destroy their structure, and gradually dissolve these carbon particles from the metal surface, and then discharge them through exhaust gas after burning with fuel at high temperatures. Effective fuel additives such as PNF stock solution are non-corrosive, will not clog ternary, and have a relatively high level of safety.

It is necessary to regularly clean the throttle, clean the fuel injector, and clean the carbon deposits in the engine cylinder! However, to reduce the hassle of cleaning, it is best to regularly add Thermage graphene lubricant additives to the engine. At a certain temperature, it can make the alloy body react with carbon elements, and can be coated with a layer of graphene film on the internal surface of the engine, and graphene nanoparticles can fill the wear micropores and scratches, and repair the surface of the friction pair.

In this way, the tightness of the engine can be maintained, and the oil will not be allowed to run around due to large gaps, which can be the "bane" of carbon deposits.

1. The most common is to disassemble the throttle, clean the front and back of the throttle with a carburetor, and dry it with a cotton cloth. Generally, it is recommended to clean the lower throttle for a year or 20,000 kilometers, of course, different models will have different cleaning cycles, we can do it according to the maintenance manual.

2. Carbon deposition cleaning inside the engine, we can do it before we want to change the oil to a new one. Open the oil cap, add detergent, mix with old oil, and idle for about 10 minutes. You can buy the detergent by yourself, the operation is very simple, and you can operate it yourself.

3. To clean the air intake system, buy a bottle of air intake system cleaner, pour it into the liquid storage tank of the special cleaning equipment, connect it to the air intake system, and use the vacuum to suck the detergent into the air intake road to achieve the purpose of cleaning. Cleaning the carbon deposits in the intake system mainly refers to cleaning the carbon deposits inside the intake tract and intake manifold. The purpose is to remove carbon deposits from the intake system, increase intake flow and speed, and reduce engine shake and idle instability.

After the car has been used for a long time, remember to remove carbon deposits.

Carbon deposits can cause insufficient combustion of gasoline and cause the engine to shake. The impact of engine carbon deposition on the car is quite large, first of all, to reduce the engine power, that is, to make the power output uneven and gradually decay, in other words, more and more powerless. The second is to increase fuel consumption and increase your financial burden.

The third is the difficulty of cold start, that is, the difficulty of ignition, it is not easy to get on the car, and finally the carbon deposit in the combustion chamber is strict, and a heavy one will also cause cylinder detonation, and there will be a sound of low-speed acceleration, which will cause damage to the piston and crankshaft, and cause high temperature of the engine, which will seriously affect the safety of the car. Then the emission exceeds the standard, not only can not pass the annual inspection, but also directly aggravate the harm of environmental pollution, solution: replace the good fuel, regularly add fuel additives, such as Marty, Tiger, Dodge, etc. to promote the combustion effect of fuel.

Carbon deposition is the most common "chronic disease" that affects the normal working condition of the engine, and it exists in all parts of the engine. Of course, I believe that when you go to the 4S store for maintenance, you have also been recommended by its after-sales reception for the cleaning project of engine carbon deposits. So, in addition to cleaning up carbon deposits in 4S stores, what good ways can we clean up carbon deposits by ourselves?

Please click Enter a description.

Ways to clean up carbon deposits yourself:

If you want to clean the engine carbon deposits, we recommend you to use additives to clean the carbon deposits. It's a cost-effective way to clean and easy to use, making it perfect for your own use.

Additive cleaning (fuel treasure): additive cleaning is to directly fill the cleaning agent into the fuel tank and mix with the fuel, after the vehicle starts, the cleaning agent will enter the combustion chamber with the fuel, and the cleaning agent will enter the combustion chamber at the same time, the carbon deposits inside the engine will be cleaned to a certain extent.

Please click Enter a description.

About other carbon deposit cleaning methods:

Hanging bottle cleaning: Hanging bottle cleaning is what we usually call no-dismantling cleaning, which is also a cleaning method promoted by 4S stores. In this method, the cleaning agent is sucked into the engine combustion chamber in the form of a hanging bottle from the engine intake duct along with the intake air flow, and in this process, the cleaning agent cleans the carbon deposits in the engine intake duct and combustion chamber.

Disassembly and cleaning: As the name suggests, disassembly and cleaning is to disassemble and clean the parts of the engine that have carbon deposits. Although this method has the best cleaning effect, due to the heavy workload, time-consuming and labor-intensive, generally 4S stores will not provide dismantling and washing services.

The method of removing carbon deposits, one is that the carbon deposits are not too serious, and the no-disassembly cleaning method is adopted, which is cleaned by adding a special liquid. The other is that the carbon deposition is serious, and the method of uncovering the cylinder head to clean the valve and cylinder wall should be adopted.

How to clean up carbon deposits in cars? Cycling eggs need to be cleaned up, the diesel engine runs at high speed, and the slight carbon deposition can be discharged from the parking space through the exhaust system.

To clean up the carbon deposits of the car, it is necessary to clean it up, to disassemble the engine, if it is generally cleaned, it is to flush it, and the general individual does not have that kind of equipment.

1.Clean the missing throttle, remove the throttle, clean the wheel with a professional cleaning agent, and lubricate the position of the flip shaft with oil to avoid stagnation; 2.Clean the carbon deposit in the combustion chamber, remove the ignition coil and spark plug, insert the endoscope into the combustion chamber to check the carbon deposit, and use the cylinder injection combustion cleaning agent or hydrogen and oxygen injection type for cleaning; 3.