How much is a square floor paint construction process for general floor paint

What is the ** of epoxy flooring.

a.Epoxy resin self-leveling floor: according to the color, thickness of the difference, the general self-leveling in 42 120 yuan, rarely lower than this ** scene.

However, if there are additional requirements, there will be a type that is much higher than this average**. For example, the requirements of purification level, ultra-flat ground, ultra-wear-resistant floor, etc.

b.Epoxy mortar flooring: the thickness is generally not less than, ** generally between 26 and 60 yuan; Of course, other requests remain the same, the higher the thickness, the higher the **, does not rule out some heavy load requirements of the ground ** beyond 100 or even 200 or more phenomenon.

c.Epoxy flat coating: the sand scraping procedure of the middle coating is omitted, and even some do not even have the putty layer of the middle coat, so it is extremely low, generally around 22 yuan, and some are even as low as 19 yuan.

However, despite the low price, the use cycle of this type of floor is also very short, and it is not a long-term solution.

d.Epoxy anti-skid lane: dedicated to the underground garage, the thickness is generally not less than 3mm, divided into sand anti-skid ramps and non-vibration anti-skid ramps, according to different requirements, generally ** in 65 yuan 180 yuan.

e.Anti-static epoxy flooring: there are two kinds of roller coating type and self-leveling type, the anti-static and static dissipative properties of the two floors are different, and the surface resistance value is stable between the fourth power of ten and the ninth power of ten. The market of self-leveling anti-static flooring is generally not less than 75 yuan.

f.Color sand epoxy floor Pressed sand epoxy floor: highly decorative, high-strength wear-resistant epoxy resin floor, high level, price of more than 150 yuan.

g.Water-based epoxy flooring: water-based epoxy flooring technology is not very mature compared to oil-based products, but water-based epoxy mortar flat coating type is now widely used, under the same conditions than solvent-based and solvent-free ** slightly higher, that is, the unit price is between 30 100 yuan.

How much is a square meter of floor paint construction! Hello, I am glad to answer for you<> pro-floor paint construction 20-25 square meters, under normal circumstances, the floor paint package material is about 20-25 yuan. Because there are many types of floor paint, it is epoxy mortar floor, epoxy flat coating floor and a series of floor paints, and each process is different, the cost and construction plan will also be different, so it needs to be calculated according to the actual situation of the buried field, in addition to the high configuration, the construction is about 200 yuan, this is actually just a reference to the actual and customer requirements to decide.

Now when brushing floor paint, it is contracted to the engineering party, and then the price per square meter will be different according to the material you choose, the area of construction, and the socks will be different. Under normal circumstances, the ** per square meter ranges from tens of yuan to several hundred yuan. Now factories and shops use epoxy self-leveling floor paint the most, and the cost of contracting labor is included in it, and the ** per square meter is.

Fifty or sixty dollars. The effect of production is very good, the flatness is very high, and it is relatively environmentally friendly and healthy, there is not much harm to the human body, and there will be no problems after using it for many years. I hope I can help you <>

Do you have any other questions?

Floor paint is familiar to everyone, it is one of the most common decorative materials, with a strong beautification function and protection, is widely used in various places. So how much is the ** of floor paint? What is the construction process of floor paint?

How much is the ** of floor paint:

1. There is no unified regulation of it, and it will be affected by external factors such as area and loss material, such as: economical epoxy flat floor paint ** starts at about 12 yuan, of course, there are lower ** products, but the quality is too poor, it is not recommended to use.

2. When calculating the amount of floor paint, it is necessary to calculate the amount of epoxy floor primer, middle coat and topcoat = material. When calculating the construction cost per square meter, the material ** + construction cost should be calculated, so that the epoxy floor paint per square meter can be calculated.

The floor paint is the construction process:

1. Grassroots treatment.

Before construction, it is necessary to remove the loose layer, delamination and cement residue on the ground to make the ground harder and smoother, and increase the adhesion between the floor coating and the ground.

2. Local primer construction.

During construction, the epoxy sealing primer should be adjusted, and then the method of roller coating, scraping or brushing should be used to allow it to penetrate into the inner layer of concrete.

3. Medium coating construction.

After the bottom layer is applied, the middle coating material should be mixed with English sand and stirred evenly, and then coated with a trowel to form a flat and dense layer of a certain thickness.

4. Paint and make up.

After the middle layer is coated, the top coating material and quartz fine powder should be stirred together to fill the gap between the larger particles of the middle coat, and after it is completely solidified, the surface of the ground tung is polished with a dust-free grinder, and the dust is sucked out with a vacuum cleaner and polished smoothly.

5. Top-coating construction.

After the coating batch layer is ready, the epoxy pigment and the curing agent should be mixed and stirred evenly, and trowel, brush, roller or spraying can be used to level it to obtain a smooth and uniform surface coating.

Performance characteristics and scope of application of floor paint:

Epoxy floor paint is not only rich in color and easy to clean, but also has the characteristics of wear resistance, pressure resistance, waterproof, dustproof, anti-slip, anti-static, electromagnetic waves, etc., so it is widely used in electronics factories, hardware factories, pharmaceutical factories, automobile factories, hospitals, aviation, laboratories, offices, paper mills, chemical plants, textile factories, beverage factories, meat processing plants, parking lots and other surface coatings.

Everyone knows about floor paint. It is one of the most common decorative materials. It has a strong grooming and protective effect and is widely used in some places. So, how much is floor paint**? What are the construction processes of floor paint? Let's find out.

1. There is no unified provision for specific **, which will be affected by external factors such as area and materials. For example, the economic epoxy flat floor paint ** is about 12 yuan square meters, and when the ground floor paint ** is low, its quality will be uneven, so it is not recommended.

2. When calculating the floor paint, the amount of floor primer, middle coat paint and topcoat must be calculated according to the method of epoxy primer. When calculating the construction cost per square meter, it is necessary to calculate the material construction in order to calculate the epoxy floor paint per square meter.

1. Basic treatmentBefore construction, the loose layer, delamination and cement residue on the floor must be removed to make the floor harder and softer, and increase the adhesion of the floor covering to the floor.

2. Construction primer During the construction process, the epoxy resin sealing primer must be adjusted, and then penetrate into the inner layer of concrete through roller coating, scraping or brushing.

3. The structure of the dielectric coating After the lower layer is applied, the coating of the medium is mixed with sand and evenly mixed, and then coated with a trowel to form a flat layer of a certain thickness.

4. Coating batch and supplementation After the middle layer is applied, the surface coating material and fine quartz powder should be mixed and applied together to fill the space between the larger particles of the dielectric coating. Once completely set, clean the floor with a dust-free polisher, vacuum, and polish.

5. Once the coating is completed, the epoxy coating and the curing agent should be mixed and stirred, and the coating, brushing, and roller coating can be obtained by flat coating or spraying to obtain a flat and uniform surface coating.

Epoxy floor paint is not only colorful, but also easy to clean, but also has the characteristics of wear resistance, pressure resistance, waterproof, dustproof, anti-slip, anti-static, electromagnetic wave and so on. Therefore, it is widely used in electronic products, hardware factories, pharmaceutical factories and other factories. Surface coating for automotive factories, hospitals, aviation, laboratories, offices, paper mills, chemical plants, textile mills, beverage factories, meat processing plants, parking lots, etc.

There are many factors involved in each square meter of floor paint, so it needs to be decided according to the specific situation of the owner: first, because different brands and types, floor paint is different, and the difficulty of construction will also have a great impact on the floor paint, and the specific variability is great.

You can get it for free

Floor paint can be seen everywhere in our lives, and when we use it, we don't know how to use it because we don't know about it. When we buy, we will consider a question, that is, how much is a square meter of floor paint? You don't know!

What is the use of rice and floor paint?

How much is a square meter of floor paint.

1. Different types of floor paint are also very different, so how much is a square meter of floor paint? According to different product types and construction processes, the construction has different conditions, such as when the ground is quite good (flatness, hardness, humidity), if the top is walking, you can do epoxy thin coating, usually 4-5 times, between 22-28 yuan.

2. If it is to be beautiful, you can do epoxy self-leveling, 55-65 yuan is a 1mm thick epoxy self-leveling convention, and it should be increased according to the thickness. Usually, epoxy self-leveling flooring is more than 60 yuan per square meter of contracted labor and materials, epoxy thin coating floor is lower than 18 yuan, and epoxy mortar floor is lower than 28 yuan.

3. There are different types of floor paint, and the difference is relatively large. It can be divided into: ordinary oil-based paint, water-based floor paint, and floor oil.

Ordinary Xuqing floor oil-based paint** but the shelf life is not long, and the cost of a good oil-based floor paint is 15 20 yuan; The quality of water-based floor paint is good, safe and environmentally friendly, but it is two or three times that of oil-based floor limb paint; The floor oil is transparent, the choice of this paint depends on personal preference, good environmental performance, this kind of ** about 20-30 yuan. The price level varies slightly from place to place.

How to use floor paint.

1. The choice of time and the cleaning of the floor surface can not be a new project that has just ended for the construction goal, and Yingai makes it dry for about a month before the construction of the floor paint can be carried out. And it is also very important for the treatment of the surface of the construction site, such as the site that has just been renovated, there will be a lot of sundries on the ground, and even masonry, including the factory building that has been shelved for a long time, there will be a lot of dust, which must be mutually beneficial and clean, providing a clean environment for the construction of floor paint, so that the floor paint can be fully adhered to the surface.

2. Spray epoxy sealing primer on the surface of the floor: because the gap on the surface of the floor is uneven, there will be a large number of gaps or small holes in some rough places, which will affect the construction effect of the floor paint.

3. The configuration of floor paint: although the floor paint purchased has good characteristics, in order to make it have stronger characteristics, we need to add a certain amount of diluent to make it penetrate into the inner layer of the surface and increase its impermeability.

When we choose floor paint, we need to consider it, and learning how to use it is also very important. The above is the floor paint introduced to you today, how much is a square meter and how to use floor paint, and this is the end of it.