Breguet mechanical watches go slowly, why do Breguet watches go slowly? Ask God for answers?

Hello, the general watch slows down by the following three reasons, I hope to help you.

1.Insufficient power: mechanical watches are divided into manual mechanical watches and automatic mechanical watches, insufficient power is an important reason for the watch to slow down or stop the watch, manual mechanical watches can be wound directly when they are slow, and the reason why automatic mechanical watches are slow is mostly because of insufficient wearing time or the arm does not maintain a normal amount of exercise, and it can be directly manually wound to supplement the power.

2.No maintenance: mechanical watches are generally maintained once every 2 to 3 years, the watch is used for a long time, the lubricating oil in the movement will dry up, and the friction of each gear for a long time will produce iron filings, increase the friction between the gears, this kind of problem only needs to clean the movement, re-refueling.

3.Shock: A mechanical watch has a complex structure and is composed of hundreds of precision parts, which is very fragile, and the watch is subjected to a strong impact, and the parts in the movement may loosen and cause the watch to slow down or stop.

According to the reason why the watch is slow, you can take corresponding measures, pay attention to the winding of the manual machinery, maintain the normal amount of exercise of the automatic mechanical arm, maintain it on time, pay attention to the watch waterproof, shockproof and anti-magnetic, and send it for repair in time if there is a problem.

Click here to contact a Breguet after-sales service center.

It is a very common phenomenon for Breguet watches to slow down, and sometimes the sudden slowness of the watch will bring unnecessary trouble to everyone, so what is the reason for the slow movement of Breguet mechanical watches? The following is introduced by the watch repair center and watch repair service center.

1. Lack of maintenance: Breguet mechanical watches need to be maintained every 3 years or so, if not regularly maintained, the sludge in the watch movement will accumulate too much, show dry knots, and cause friction damage between the wheel trains, and the watch is not accurate or even does not go.

2. Shock: Breguet mechanical watches have a complex internal structure and many parts, even though the shockproof function is good, but the violent impact will affect the movement parts in the watch many times, and there will be loosening, misalignment, and damage, resulting in the watch slowing down and not moving.

3. Insufficient kinetic energy: Breguet mechanical watches rely on winding to ** energy, whether it is an automatic mechanical watch or a manual mechanical watch, if the kinetic energy is insufficient, there will be a situation where the watch will slow down or not go.

The reason why the watch is not running accurately.

1. External influences: It is a variety of influences from outside the clock, depending on the working environment of the clock.

2. Fast and slow needle: fast and slow needle is an economic structure that is convenient for time calibration, but theory and practice have confirmed that it will affect the isochronism of the system, and may also produce a bit difference, and these timing errors are relatively random and cannot be compensated or offset.

3. Friction: Friction usually has positive and negative effects, and it has a positive aspect, such as friction wheel, friction between the automatic watch spring and the barrel, screw self-locking, etc.; On the other hand, friction can lead to a decrease in transmission efficiency and wear of parts, which can affect timing.

4. Escapement: The influence of the escapement is mainly the impact on the balance spring system in the process of energy transfer, and the balance spring system can only maintain a fixed frequency in the case of freedom, obviously, the energy transfer process of the escapement will affect the frequency. The theory suggests that this effect decreases as the transfer process approaches the equilibrium point of the balance.

5. Influence of temperature: The influence of temperature is mainly manifested in two aspects: first, the temperature change will change the working length of the hairspring, and at the same time change the inertia of the balance wheel, which can directly affect the timing accuracy; Secondly, the temperature change will affect the viscosity of the lubricating oil, affect the transmission efficiency, and thus affect the timing.

6. Magnetic field: the hairspring with the greatest influence of the magnetic field can change its elastic modulus, and also deform the hairspring under the action of the magnetic field, resulting in additional stress.

7. Balance spring: The center of gravity of the general swing frame hairspring changes with the change of the swing angle of the balance wheel, and it will produce position error under the action of gravity.

8. Balance wheel balance: The balance of the balance wheel element directly affects the bit difference, and the static balance of the balance wheel element is a basic requirement.

If you find that your watch is slowing down, you can find a compass to diagnose whether the watch is magnetized. Place the compass flat on the table, hold the watch at close range and quickly shake it back and forth above the compass, and try the watch in a few directions a few more times, as long as the pointer moves, especially if the deflection is very strong, you can judge that the watch is magnetized. The watch is magnetized and it is best to take it to this repair center for demagnetization.

Usually take care of the watch, do not let the watch come into contact with items with strong magnetic fields, and it is best to keep a distance of more than one meter. Do not leave your watch next to TV, computer, radio, mobile phone, mahjong table, refrigerator, washing machine, speaker, car door, or leather bag magnetic buckle.

Another reason is that summer is coming, and the hot weather will go faster than the cold weather. Yes, there are two laws of physics here. One is the thermal expansion and contraction, the weather is hot, the hairspring will be a little elongated, this everyone wants to get, therefore, the lengthened hairspring, the swing will also increase, and the watch will slow down; On the contrary, when the weather is cold, the watch will go faster.

Hello, it is possible that the watch is magnetized or the power is insufficient. Once the magnetism on the watch is all of a sudden, it goes very fast, even 1-2 hours a day. When wearing mechanical watches, pay attention to keep away from magnetic fields, such as stereos, televisions, mobile phones and other electrical appliances.

Magnetization is a common phenomenon nowadays, and the solution is not difficult, just go to the watch for repair and demagnetization, or bring your own demagnetizer, it only takes 30 seconds to demagnetize the watch, and there is no impact on the performance of the watch.

There are two situations in which the watch is not allowed.

If it's just a little fast, for example, it's only more than ten or twenty seconds a day, then the gossamer circle is a little shorter, and this situation is okay.

If you know a little bit about the watch, you can adjust it yourself, if you don't understand, you have to find a watch repairer.

Mechanical watch The oil inside the movement is dry or there is a problem with the movement Quartz watch The battery is low The battery is dead The internal problem of the movement should be sent to the service center for testing The address in Chengdu is in Room 05, 24th Floor, Sichuan Aviation Plaza.

The reason why the watch is slowing down.

Lack of power: There are two types of mechanical watches: manual and automatic. Lack of power is often an important reason for the watch to slow down or even stop.

Mechanical watches that are wound by hand can solve the problem by winding, while watches that are self-winding are mostly due to insufficient wearing time (less than 8-10 hours a day) or people who exercise a little bit. Friends in the general office or the elderly often have a mechanical watch with insufficient power, causing the watch to slow down.

Insufficient watch maintenance leads to mechanical failure: daily wear is not too careful, there are collisions and other problems, which makes the internal parts of the watch loose, resulting in inaccurate watch time. Dust, foreign matter, so that the gear teeth are stuck with each other, and some watches are too much or very little oil, which will make the electronic watch go badly.

1) Insufficient power reserve: You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is very small, it may also cause insufficient power reserve, you can replenish the power by manual winding, and then observe whether it continues to have the phenomenon of fast and slow.

2) Insufficient power: If the quartz watch suddenly finds that it is slow, it is likely to be caused by insufficient battery energy, and you can send the watch to a special maintenance point to check the power.

3) Hit or hit: The watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause the problem of running time.

4) Need to maintain: The lack of oil in the movement or the wear and aging of internal parts may cause time problems, which need to be maintained, and need to be sent to the designated maintenance point for maintenance services.

Hello, the reason why the watch is going slow can be:

1. Insufficient battery: If the quartz watch suddenly finds that it is slowing, it is likely that the battery is insufficient, and you can send your Blancpain watch to a special maintenance point to check the battery level.

2. Insufficient power reserve: You need to check whether the power is sufficient, if the amount of exercise is very small, the automatic watch may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of fast and slow.

3. The watch is magnetized: If the hairspring of the mechanical watch is magnetized, the watch will not be accurate.

4. Need for maintenance: The lack of oil in the movement or the wear and aging of internal parts may cause time problems, and it needs to be sent to the designated maintenance point for maintenance services.

5. Hit or impacted: The watch is very precise, if it is hit or hit, it may cause loose damage to internal parts, and it may also cause time problems.

6. In addition to the above common situations, the influence of some ambient temperature and the wearer's usage habits may cause an increase in the timing error.

There are three main reasons why mechanical watches are inaccurate.

1.Watch magnetization: The watch is in too much contact with items with magnetic fields, which leads to the phenomenon of magnetization of the watch, causing the watch to be inaccurate.

After being magnetized, the watch may stop, slow, or fast. After the watch is magnetized, its magnetism will not recede on its own, and it needs to be demagnetized to restore it to normal.

2.Lack of maintenance: If the watch lacks maintenance, it will lead to wear and tear of parts, dry up the sludge, affect the normal running time of the watch, and make the watch appear fast and slow.

3.Mechanical failures: Mechanical failures such as watch balance spring failures, escapement failures, and component slips can cause the watch to be fast and slow.

Mechanical watches are sometimes fast and sometimes slow, and it may be caused by severe impacts, water ingress, etc. Quartz watches are generally very accurate and less prone to time failures. In the case of adequate maintenance, it is more likely to be fast and slow, which is more related to the failure of the circuit board, or the poor contact of a certain part.

Mechanical watch The oil inside the movement is dry or there is a problem with the movement Quartz watch The battery is low The battery is dead The internal problem of the movement should be sent to the service center for testing The address in Chengdu is in Room 05, 24th Floor, Sichuan Aviation Plaza.

Hello, glad to answer for you!

Reasons for inaccurate time: insufficient kinetic energy reserve of the watch, insufficient battery of the watch, the watch has been hit or hit by an external source, the watch has not been maintained for a long time, and the watch is affected by magnetic fields.

Solution: It is necessary to go to the after-sales center for testing and maintenance.

Hello, glad to answer for you!

Room 509, Block D, Parkview Green Parkview, No. 9 Dongdaqiao Road, Chaoyang District, Beijing] [400-606-8509].

1) Having been hit or impacted.

2) Maintenance is required.

3) In addition to the above common situations, some ambient temperatures affect the watch by magnetism: if the balance spring of the watch is magnetized, the watch will not be accurate.

If the watch is faulty, you can call for consultation**!

Hello, there are three main reasons for errors caused by mechanical watches, which are listed below, I hope it will help 1. **It will affect the accuracy of mechanical watches, violent vibration or high-frequency jitter will affect the vibration cycle of the balance wheel, thereby affecting the accuracy of the watch. If severe, it can also cause damage to the balance shaft tenon or hairspring, so it is recommended not to wear the watch when playing sports.

2. Magnetic field is the nemesis of mechanical watches. Mechanical watches are composed of hundreds of precision parts, among which there are many steel gears that are extremely susceptible to magnetism, and nickel-based hairsprings are also weakly magnetic. When the parts of the watch are magnetized, it is very likely that the watch will run incorrectly, and when the hairspring is magnetized, the hairspring will stick to each other and cause the watch to run several hours faster.

3. Dust or moisture may affect the accuracy of the watch, and the watch will cause the movement to rust when wet, which will increase the internal resistance of the machinery and cause the time error. Dust accumulation can also dry out the oil on the movement, which increases the wear and tear of the components within the movement and increases the error of the watch.

Breguet watch repair**: 400-659-0877 Each watch has its own maintenance method, only the correct use of daily maintenance methods, then it can be said that the life of use is getting longer and longer, today I will introduce you to the tips on how to properly maintain the watch, let's learn it together.

1. After soaking in gasoline and washing, that is, soaking in gasoline and washing, it can solve the long-term accumulation of oil scale and block the watch failure, and achieve the purpose of maintaining the watch.

2. Check the internal parts of the watch, if you find that the screw cap is broken, use the watch screwdriver to unscrew it. Then take out the broken screw, you can deal with the problem of the failure of the internal parts of the watch, so as to achieve the purpose of maintaining the watch.

Five reasons for watch time error and watch time inaccuracy:

1: Insufficient power reserve.

2: The battery is insufficient.

3: Having been hit or impacted.

4: Maintenance is required.

5: The watch is magnetized: If the hairspring of the watch is magnetized, the watch will not be accurate.

So the easiest reason to make a watch fast is that it doesn't have enough power. There are several reasons why it is often not enough to be motivated:

First: not enough chain. If you don't wind it much, you won't have enough power.

This is the most common problem with automatic tables. I haven't worn it for a long time, and it's not enough to put it on my wrist and think that I can wind my watch with a few random shakes. Remember, even if it is self-winding, if you haven't worn it for a long time, you should still wind it manually first.

Second, magnetization. The balance spring is made of metal. All metals have the possibility of being magnetized.

Magnetized metal, in simple terms, is like a magnet magnet. The magnetized hairsprings attract each other like magnets, which greatly reduces the expansion of the hairspring, which in turn reduces the spokes of the balance, and then the escapement arm is faster, the emergency wheel is faster, and finally the second wheel is also faster. If there is a problem, it is recommended to send it to Breguet after-sales service.

The service point is in good hands!