How to use Mercedes Benz C180L electronic parking brake

Mercedes-Benz C180L electronic hand brake as long as the upward pull up is the working mode of hand brake, after turning on the electronic hand brake, the vehicle will not roll even if it is parked on the road with slopes, the specific operation steps of using Mercedes-Benz C180L electronic hand brake are as follows:

1. Press the brake pedal of the Mercedes-Benz C180L to slow down the vehicle.

2. Park the Mercedes-Benz C180L on a safe road.

3. Put the gear lever of the Mercedes-Benz C180L into the P gear park.

4. Pull the electronic hand brake of Mercedes-Benz C180L to turn on the parking mode.

5. At this time, the Mercedes-Benz C180L will not roll even if it is parked on a sloped road.

Automatic transmission parking sequence.

1.The car stops and engages in N gear, and pulls up the handbrake or electronic parking brake.

2.Release the foot brake and use the handbrake or electronic handbrake to stop the car.

3.Press the brakes and put it in P gear.

4.Close the windows, turn off the engine and unplug the key lock door.

Parking needs to be operated in strict accordance with the above steps, the order is not right may cause the next time from the P gear hanging tighter, there is also a certain damage to the gearbox.

Hello, you can press it after the engine is turned off, and you can press it after the car is started, I hope mine will help you Thank you [Car questions, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

After the car turns off, press and hold the electronic handbrake for about 3 seconds, and the instrument handbrake light will be on. Loosening is the same procedure. [Car questions, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Step on the brakes after the fire is extinguished, and press p on it [car questions, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

As long as you pull up is the working mode of hand brake, after turning on the electronic hand brake, the vehicle will not slip even if it is parked on the road with a slope, and the specific operation steps of using Mercedes-Benz C180L electronic hand brake are as follows:

1. Press the brake pedal of the Mercedes-Benz C180L to slow down the vehicle.

2. Park the Mercedes-Benz C180L on a safe road.

3. Put the gear lever of the Mercedes-Benz C180L into the P gear park.

4. Pull the electronic hand brake of Mercedes-Benz C180L, and turn on the parking mode with a disturbance.

5. At this time, the Mercedes-Benz C180L will not slip when parked on a sloped road.

The handbrake of the Mercedes C180.

Pick up a small pedal on the left side of the driver's brake pedal, and the specific operation steps are as follows:

1. Stop the Mercedes-Benz C180 completely.

2. Press the one-button start button of Mercedes-Benz C180 to turn off the motive of the hair-like base limb.

3. Place the Mercedes-Benz C180 transmission.

As for the P file. Parking gear.

4. Pull on the steering wheel.

The word P on the left opens the slag world off, and the handbrake can be turned on.

5. After turning on the handbrake, the Mercedes-Benz C180 will also stop smoothly on a certain ramp.

The handbrake of Mercedes-Benz C180 is a small pedal on the left side of the driver's brake pedal, and the specific operation steps are as follows:

1. Stop the Mercedes-Benz C180 completely.

2. Press the one-button start button of Mercedes-Benz C180 to turn off the engine.

3. Put the transmission of Mercedes-Benz C180 to P gear and parking gear.

4. Pull and hold the P-shaped switch on the left side of the steering wheel to turn on the handbrake.

5. After turning on the handbrake, the Mercedes-Benz C180 will also stop smoothly on a certain ramp.

The position of <> No. 1 is the hand brake, and when you press it, the brake is done.

Remove the handbrake and pull the small handle on No. 2.

In the **, No. 2 position, stepping on it is the brake, pull the small pull of the No. 1, and the handbrake will be lifted.

They are all set automatically by default. The electronic parking brake is at the knee of the left leg. Press down and pull the handbrake, lift it up and put it down.

After the brake stops, no matter whether you press the hold or not, as long as you do not enter the P gear, any other gear will automatically hand brake, and at the same time, the N gear will be automatically set. If the engine is turned off and the advance p is not automatically braked. So I turned off the ignition every time, even on the slopes, because any gear except P turned off, it would automatically brake and go into neutral at the same time.

Therefore, parking on the slope will not damage the gear, and the door can be automatically hung after the ignition is turned off.

Extend your data. Application of the electronic parking brake system.

1.The electronic parking system works on the same principle as the manual mechanical parking brake system. Parking is achieved by friction clamping between the brake shoe and the brake hub or between the friction pads and the brake disc.

The original manual operation and mechanical linkage were replaced by electronic buttons and motor actions, so this system is called the electro-mechanical parking brake system.

2.At present, there are two main forms of electronic parking brake technology applied in automobiles, one is the cable-type electronic parking brake system, and the other is the caliper-type integrated electric trace combustion brake system. Because the cable-based electronic parking brake system retains the cable-pull of the traditional mechanical parking brake system, it is only a transitional product that should be used in the early stage, and is rarely used in automobiles.

At present, caliper-integrated electronic parking brake systems are the most widely used in automobiles.

Advantages of the electronic parking brake system.

Compared with the traditional manual mechanical parking brake system, the electronic parking brake system has the following advantages:

1.The parking brake lever has been eliminated in the cabin, providing more space for the interior design of the whole vehicle.

2.The parking brake replaces the driver's deadlift on the parking brake handle with one button, which is simple and labor-saving, and reduces the operation intensity of the driver, especially the female driver.

3.With the continuous development of automotive electronic parking control technology, the system can not only realize basic functions such as static parking, static release (OFF), automatic release (OFF), but also increase auxiliary functions such as automatic parking and dynamic parking. For example, the Autohold automatic parking key installed on the Volkswagen system can complete the above functions.

Thanks to the integration of dynamic stability control into the electronic parking brake system, driving is safer and more convenient.

Millions of car purchase subsidies.