How to stick the flute film on the bamboo flute 5, how to paste the flute film on the bamboo flute

The quality of the flute membrane is directly related to the timbre and volume of the flute, which is a very important thing for those who play the flute.

Most of the flute membranes are reed membranes (a layer of film in a hollow rod of reeds). Years of artistic practice have proved that reed film is the best material for film making. The reed film is young, old, thin and thick to distinguish its good from bad.

The tender texture is thin, transparent and shiny. The old ones are thick, rough and yellowish. It is better to use a tender film for flute.

After the flute film is selected, it is necessary to carry out a meticulous pasting work. Before pasting, use a knife to break the flute membrane into rectangular pieces, and then pull the original stripes of the flute membrane to both sides with both hands until the flute membrane appears to be perpendicular to the direction of the original flute stripes, and then it can be pasted. Paste can be ejiao, peach gum, baiji, etc., first wet the colloid, and gently apply it around the membrane hole.

Then hold the flute body with your left hand, and hold the membrane in your right hand and stick it to the membrane hole in the correct direction. When the flute membrane touches the membrane hole, first press the flute membrane along one side of the flute body with the thumb of the left hand, then use the right hand to pull out the fine lines of the membrane, and then use the right thumb to press and smooth the other side of the membrane. After gradually attaching it, gently press the flute membrane on both sides of the membrane hole with the thumbs of both hands, and gently wipe it on both sides of the flute body at the same time.

Pay attention to adjust the tightness of the flute membrane, if it is too tight, the timbre will be wooden and not bright; If it is too loose, the timbre is hoarse and sandy, and the treble cannot be blown up. Therefore, it is necessary to adjust it while trying to blow before the glue dries. If you find that the flute membrane has been too tight, you can dip the membrane hole slightly with water, and then gently press the flute membrane with your index finger to the belly to gradually adjust the flute membrane after a period of use, often due to the change of climate and temperature and affect the tightness of the flute membrane.

In this case, there is generally no need to reapply the film. If it's too tight, you can use the methods mentioned above to restore it; If it is loose, you can first warm it to the flute membrane to moisten it, and then blow it naturally or dry it with body temperature, and repeat it several times to recover.

We used to use garlic paste. Cut the garlic cloves, apply them around the holes, and then stick to the membrane

Dizzy ... LS is so complicated.。。。 To tell you a simple way, use some flute glue (if you don't have saliva, you can do it for you). The flute membrane is compounded on top of the membrane hole, and its texture and bamboo wire texture are 90 degrees. Place the thumbs of both hands on either side of the diaphragm and adjust moderately.

The flute film is attached to the second hole at the left end of the flute, and the film that vibrates and makes a sound when playing the flute, this film is taken from the stem of bamboo or reed, and can be put in the refrigerator to keep the film fresh.

If you want to make a sound, you must apply a flute film to it, but many beginners will not stick the flute film correctly, so let's introduce the method of the flute film

1.First of all, we need to find a suitable flute film, which we knead into a fold with our hands and set aside.

2.After that, we use Baiji, which is a kind of traditional Chinese medicine, which has great viscosity, which can stick the flute membrane to the small hole on the flute, and play a fixed role, and we will apply Baiqi to the flute hole.

3.Then find the flute membrane that we just put aside, and slowly knead the flute membrane out of these folds, the effect is that when we play, these folds will have a resonance when pronouncing, and play a role in resonance.

4.After that, it is better to glue the flute membrane so that it has a certain wrinkle, and do not blow it immediately after it is glued, but let it sit for a while until all the liquid is dry before blowing. Some places are not sticky, and you can also smear some white ruffle.

5.In addition to Baiji, we can also use Ejiao paste, which can be bought in the market, paste it like the above method, and finally press the flute film tightly, so that the flute film will be glued, and we can try whether it can be blown.

Notes:

1.Choose a wider (thicker reed) flute membrane, preferably two centimeters wide after cutting.

2.Apply mucus around the membrane holes of the flute, taking care to be even, especially on the edges of the membrane holes.

The application of the flute film is as follows:1. Take out the flute membrane prepared in advance.

2. Cut centimeters with scissors.

3. Break the sedan slow flute membrane from the middle.

4. Spread out the flute film.

5. Dip the ejiao prepared in advance into water.

6. Evenly apply the ejiao soaked in water around the flute hole to be filmed.

7. Gently close the mold and gently stretch the flute film until it appears wrinkled.

8. Press down a section of the flute membrane with the thumb of one hand, and then pull the flute membrane tightly with the right hand.

9. Attach it tightly.

10. In this way, a piece of flute film is stained.

The above is how to paste the flute film.