When you first learn to play the flute, is it better to stick the flute film or tape

Beginner flute just started to learn the flute or a long day to practice the flute, when practicing or playing the flute, you can use paper to stick the film hole, or use transparent glue to paste the film hole, because after the regular flute film is pasted, the sound is louder, and the film will be loose in case of weather changes, and it needs to be pasted repeatedly, otherwise it is hoarse and harsh, paper or transparent glue, the sound is dull and not bright, and there is no need to worry about noisy people and noisy themselves, and beginners stutter and blow badly, so the flute friends who have just started to learn the flute, when practicing or playing the flute, can use paper to paste the film hole, or use transparent glue to paste the film hole. Special reminder: flute friends who practice flute for a long time throughout the day should use paper film, or wrap the hole of the flute film in paper to practice, which will not damage their hearing, and because the flute film is more inclined to blow after the flute film.

Without a membrane, it's the same no matter how you blow it, and the effect of practicing fingering is more prominent!

In conclusion, there are many benefits to this. 1. It can reduce noise and avoid disturbing others and yourself, 2The paper adhesive film is stable and not loose, and there is no need to paste it repeatedly

The purpose of learning is not to be loud for performance, but for learning. 4.When the paper film is blown, it has the charm of flute and Western music, (when I was young in the school band, I used the bamboo flute instead of the flute, and the effect was good!)

However, it should be noted that the transparent adhesive paste cannot be used on high-grade flutes, otherwise it may be easy to peel off the paint! High-grade flutes can only be glued on paper. or paper wrapping.

The flute membrane refers to the membrane that is attached to the second hole at the left end of the flute and vibrates to produce sound when playing the flute. This film is taken from the stems of bamboo or reeds, and can be refrigerated to keep the film fresh. The collected tubular flute film is very afraid of the wind, so it should not be placed in a ventilated place to be blown by the wind.

It should be placed in a sealed container (a small box is fine) and left for a period of time (about an hour or less) before being taken out for tidying. That is, use small scissors or thin blades to arrange the flute membrane from a cylinder into a sheet.

The finished flute film is neatly sandwiched in the colored books for later use, pay attention to the color books, the general book will greatly shorten the storage time of the flute film. Most of the flutes are made of bamboo, but there are also stone, jade, mahogany, and bone flutes in ancient times. However, the best raw material for making flutes is still bamboo, because bamboo flutes have better sound effects and lower production costs.

The flute film is very cheap, but it is also very important and relatively rare. No matter how good the flute is, it must also have a suitable flute membrane to put the finishing touch; No matter how high-level the experts are, they don't dare to slack off on the flute membrane.

When sticking the film, first cut a square of the flute film, so that the fiber of the flute itself and the fiber of the flute are parallel and overlapped, and then apply it around the membrane hole with Ejiao dipped in water, pinch both sides of the flute film with the thumb and index finger of the left and right hands, pull out the wrinkles that are perpendicular to the reed film fibers, and then slowly press and paste it on the lower side, and press and hold it after adjusting evenly.

Paste method 2: First, cut the membrane in half with a needle, cut a small rectangular piece, and then gently knead it into a small ball with the thumb and index finger of the right hand. Twist the membrane into many fine wrinkles, and then gently, after the membrane returns to its original shape, then use the thumb and index finger of both hands to gently stretch it forward, backward, left and right several times.

Then dip some water with ejiao and rub it around the membrane hole, so that the flute membrane pattern and the flute pattern are parallel to the flute pattern, and paste it on the flute membrane.

When a column wave is formed in the barrel to emit sound, the membrane also resonates due to the vibration of the column wave. The thickness of the flute membrane, the size of the membrane holes, the grain, the wrinkle and the tightness will all affect the timbre, and the flute sound will be clearer and louder due to the influence of resonance.

The use of flute film, first of all, is to choose the adhesive, the current use of Ejiao, donkey skin paste, yellow croaker gelatin, resin, baiji, garlic juice, glue, etc., Ejiao, baiji is the most commonly used. Because the flute film itself has a certain degree of elasticity and water absorption, the pasted flute film will have a certain degree of automatic reduction, so the film can be slightly tighter, and after it is automatically reduced, the tightness of the flute film is moderate, but if you want to use it with the paste, the flute film should be relaxed to paste.

There are many holes in the flute, and some of the holes are relatively small in the distance between them, starting from the two holes with large distances, the second hole is used to attach the flute film, and the first hole is used for blowing. Those holes that are closer are used to adjust its tone.

There are certain problems in China's current public health management system, and the direction of reform is to change the situation of segmentation of health institutions and implement unified management of the whole industry. To carry out the reform of the public health system, it is necessary not only to straighten out the health supervision system and the disease prevention and control system, but also to solve the problem of dividing the functions of disease prevention and control departments and health administrative departments at all levels, and strengthen the ability of the health system to regulate and control the public health system at the macro level and provide technical guidance. In order to fully ensure the publicness of health services, the investment in health services is mainly borne by the first to ensure that residents in all regions of the country can enjoy public health services fairly.

As far as the film you post is concerned, the first space from left to left is the position of the diaphragm.

The flute should be filmed. The flute needs to be filmed, and the flute film is to form a column wave in the flute tube to produce sound, and the flute film also resonates because the column wave is vibrate. The thickness, texture, wrinkles, tightness and size of the membrane will affect the timbre, and the sound will be clearer and louder due to the influence of resonance.

Generally, everyone eats adhesive to paste the flute film, because the flute film itself has a certain degree of elasticity and water absorption, the pasted flute film will also have a certain degree of automatic reduction, so the film can be slightly tighter, and after it is automatically restored, the tightness of the flute film is moderate, which can make a pleasant sound.

Generally, the flute membrane is taken from the inner membrane of the reed, because the membrane is thin, only about the size of a thumb, and it is easy to break, so the film should be very patient and meticulous so as not to break the membrane or stick crookedly. The flute film has a great influence on the resonant timbre of the flute, so mastering the film technique is a necessary practice for beginners.

When you are sticking the film, you can first cut a square flute film, so that the fibers of the flute film itself are parallel and overlapping with the fibers of the flute, and then apply Ejiao water around the membrane holes, pinch both sides of the flute film with the thumb and index finger of the left and right hands, pull out the wrinkles that are perpendicular to the fiber lines of the reed film, and then slowly press it on the lower side, adjust it evenly and press it evenly with your fingers.

Everyone should pay attention to the storage of the flute film, pay attention to moisture, sunscreen, and replace the flute film on the flute when it turns yellow, old, and loses its elasticity.

The steps to apply the diaphragm are as follows:Tool materials: flute, flute film, scissors, flute glue.

1. Take out the flute membrane, and then use the scissors to cut the rectangular pieces, about centimeters.

2. Take out the prepared flute glue, and then evenly coat the flute glue around the flute hole.

3. Gently pull the diaphragm until wrinkles appear. This prevents the film from becoming loose after it has been applied.

4. Press one side of the flute membrane tightly with the thumb of Lu's side, and pull the flute membrane tightly with the other hand.

5. Paste the whole piece of flute film on.

The specific method of sticking the flute film with flute film glue is:Tools Ingredients: a flute, a flute film, a piece of ejiao, a pair of scissors.

1. First of all, prepare the tools to be used for the film, put the flute well, and wipe the holes to be used for the film.

2. Then use scissors to cut out a section from the flute membrane. Feast.

3. Then knead the cut out film, and then.

4. Then dip the prepared Ejiao block in a little water and apply it near the scattered hole of the film.

5. Then rush the film to the hole and paste it, and gently pull the film to both sides.

6. At this time, the middle part of the membrane presents fine folds, and the flute membrane is pasted.

After the flute film glue is applied, paste the cut flute film on the waiting room, and it is best to have several horizontal bars when pasting. After the flute film is pasted, when the glue is dry, you can try to blow it, try the timbre is right, and try it again and again to adjust it by pressing the flute film with your fingers. The flute membrane is cut with scissors into an area larger than the flute membrane hole, a single layer.

Take out the flute film glue, dip it in some water and gently apply it around the flute membrane hole, and apply it several times to make the flute membrane sticky more firmly. If you don't have a flute gel, you can use garlic instead. The quality of the flute film has a great impact on the timbre of the flute, and the flute film sent by the general flute merchant is the most common bubble film, which costs a few yuan.

However, a good flute membrane may generally require thirty or forty.