Lily bulb planting method, how to plant lily bulb

Like most bulbous flowers (narcissus, tulips, hyacinths), lilies belong to cold and cool flowers, that is, the climate is cool, and the area with a large temperature difference between day and night is the most suitable for planting lilies, but lilies belong to skinless bulb plants, to put it bluntly, they are not like daffodils, tulips and other bulbous flowers have a layer of brown old skin wrapped outside, so they can be stored at room temperature for a long time; The lily, on the other hand, does not have that kind of old skin, and must be kept at a constant temperature of 2 degrees before it is planted in the soil, otherwise it will quickly take root and be easy to rot. Therefore, after getting the lily bulbs, you must plant them as soon as possible, and if you don't have time to plant them, you can put them in the refrigerator. First, prepare the bulbs, with buds on top and roots below, don't get it reversed!

Some balls have not yet grown roots, and the scales should be opened upwards! Second, prepare soil: Lily likes fertile, sandy soil with good water retention and drainage, and can be matched by yourself, peat:

River Sand: Perlite (2:2:

1) You can also use the soil of cactus plants, not clay. 3. Pots: Lilies belong to bulbous flowers with two layers of root systems, so it is required to use a deeper pot.

Generally, with a 20 cm diameter pot, you can plant 2-3 heads. The 3 heads are relatively compact, and they will look better when they bloom! Fourth, planting:

Lily bulbs are best disinfected before planting, and can be soaked in carbendazim 1000 times solution for 20 minutes, rinsed with water, and dried before planting. Fill 10-15 cm of soil at the bottom of the pot first, and place the ball, if there are three heads in a pot, the head of the ball is placed towards the edge of the pot, that is, like the edge of the pot, which can ensure that the plants are evenly distributed after germination. The top of the ball is covered with soil about 5 cm, watered thoroughly, and placed in a cool place for 1-2 days.

5. Pouring: To keep it moist at ordinary times, it is to grasp a handful of soil with your hands and pinch it vigorously, so that there is water seeping out of the finger seams but not dripping down. Don't overwater, too much water is easy to rot roots, watering should be watered thoroughly, not just half of the water.

Tap water should be left for a day or two before use. It is necessary to water twice a month with carbendazim 1000 times solution, the air humidity is best to reach 60-80%, and the humidity is best to be stable. At home, you don't need to bother so much, just spray water twice in the morning and evening.

6. Fertilization: The amount of fertilizer for lilies is not large, and if the family is planted and played, it is generally fertilized once every half a month. 7. Illumination:

Lily requires more shade in the early stage, generally 60% of the light, when the sun is not strong, you can not shade, so that the plant is more robust, more dwarf, the flowers are large and showy. 8. Flowering period: After planting, it will generally take 3 months to produce beautiful flowers.

Nine, after flowering lilies can be cut off by the roots, because flowering has consumed a lot of nutrients for the ball, if you want to continue to keep the bulbs, you must continue to fertilize, supplement the nutrients of the balls, a month later, you can dig out the balls, cut off the fibrous roots, put them in the refrigerator for a period of time, break the dormancy, and then plant, but the quality of the flowers will decline, and it is definitely not as good as the first flower!

How to grow lily bulbs.

Methods of planting lilies of horticultural varieties.

1. The right choice of soil for planting lilies:

1. If you are growing lilies as a family, then you can choose universal nutrient soil. However, there is a disadvantage of using universal nutrient soil lilies, that is, they are easy to dry and need to be watered more frequently.

2. The better choice is to mix clay with nutrient soil, pay attention to the ratio of mixing, clay: nutrient soil = 1:2, mix evenly, because such soil is permeable and permeable.

Why add clay? This is because clay soils can improve the water and fertilizer retention capacity of general-purpose nutrient soils. Lily bulbs require that the soil should be rich in humus, deep and loose, and can maintain a properly moist and well-drained sandy loam soil.

Pretty lilies.

Second, the choice of flower pots:

1. It is best to choose a deep pot, which can make the stem root fully grow and make the plant grow stronger.

Beautiful lilies.

2. With Lily's slender figure, it is more coordinated and beautiful.

3. Select high-quality lily bulbs:

1. Choose a well-developed root system, which is a healthy root system, with more than 5 roots and few shriveled roots.

2. Choose lily bulbs with full scales and firmness, like loose scales and dull color, it is inferior bulbs and is not recommended.

3. Choose high-quality lily bulbs and water them regularly, so you can have flowers.

Pretty lilies.

Fourth, the correct planting method of lily bulbs:

1. Put in the prepared nutrient soil.

2. When planting, the bud point of the bulb is facing upwards and the roots are facing down;

3. Put it in a basin;

4. The distance from the bulb to the pot is about 2 3 The depth of the palm; Deep burial is conducive to the growth of stem roots;

5. Covering nutrient soil;

6. Water thoroughly, so that's it!

Beautiful lilies.

Methods of planting lilies of horticultural varieties.

It is advisable to plant in the morning or evening, and the temperature of the soil at a depth of 20cm and 25cm is required to be lower than 22. The plant row spacing can be 15cm 20cm, and the plant row spacing can be appropriately increased for soft branch varieties. 25,000 plants are planted per mu, and the bulbs should be placed upright when planting, and the bud tips should be upward.

The planting depth is 10cm 12cm in autumn and 8cm 10cm in winter, and the planting depth is 2cm for varieties with a diameter of more than 18cm or easy to produce leaf burning, such as marshal and royal family. In the process of covering the soil, the bulb can not be tilted, if it is tilted, it should be straightened, and at the same time, it should not be pressed too tightly, and the furrow surface should be leveled.

To deal with the bulbs, the root system needs to be pruned before planting, and then placed in clean water to soak after disinfection, and the seeds can be sown after the bulbs are completely expanded; Prepared soil, peat, peat, perlite can be mixed into a substrate for cultivation; In the planting method, 1 3 bulbs can be placed in each pot, and then covered with a thin layer of soil and watered thoroughly.

Before planting lily bulbs, you need to prune off the rotten roots at the bottom and the root system with poor growth, then soak them in the diluted carbendazim solution for 20 minutes, take them out and wash them with water, and then soak them in clean water for 1 2 hours, and then plant them after the bulbs are completely expanded.

Lily is suitable for growing in loose and breathable, strong drainage performance of the soil growth, when the soil, can be peat soil, peaty soil, perlite mixed into the cultivation of the substrate, after the completion of the soil mixture, need to be mixed with a sufficient amount of decomposed base fertilizer into the soil, so that the lily bulb grows in a loose and fertile environment.

When sowing, you can directly bury the treated bulbs in the soil, 1 3 bulbs can be placed in a pot, pay attention to the need to put the head of the bulb towards the pot, and then cover the top of the bulb with a layer of 5cm thick soil, and water thoroughly, and then place it in a ventilated and cool environment to maintain 1 boy with 2 days.

After planting in the soil, it is also necessary to do a good job of water and fertilizer management. In the process of lily growth, in the spring need to be watered once a day, the temperature in summer is higher, need to be watered once a day in the morning and evening, in autumn and winter, you can water every 3 7 days, in addition, during the growth of lilies, you also need to apply a phosphorus and potassium compound fertilizer every 10 days.

The planting method of lily bulbs is:

When planting lily bulbs, you need to dig a hole in the soil first, then put the lily bulbs into the hole, then cover it with a thin layer of soil, and finally water the soil once to make the soil completely moist and promote the vigorous growth of lilies, and you also need to apply fertilizer every other month to provide the lilies with the nutrients they need to grow.

Lilies need sufficient water in the process of growing slag, when maintaining lily bulbs, you can water every 7-8 days to promote the vigorous growth of lilies, and you also need to use a kettle or sprayer to spray water on the flowers and leaves of lilies when the weather is hot, so as to maintain the humidity of the plant and make the lilies grow healthily.

How to deal with lily bulbs that do not germinate

1. The time is wrong

If the lily bulb does not germinate after planting, it may be because the planting time is not selected correctly, and it has not yet reached the most suitable temperature for planting, and the time for the lily bulb to germinate is in the spring, such as the root system of Liangyanguo has begun to grow, only need to continue to maintain and wait for its germination, at this time can not be watered too much water, to maintain normal growth.

2. Planting time

The best planting time for lily bulbs is in the autumn of each year, usually from September to November, and the second spring can germinate, lily planting does not have high requirements for soil, you can choose nutrient soil or sandy soil, the soil is best acidic, you can also directly use a special seedling substrate soil, add an appropriate amount of sand and gravel.

When choosing a seed Shenhu bulb, it is best to use a higher quality bulb for planting, and a fuller and more robust single-head bulb should be purchased; If the soil is suitable, the lily bulbs are suitable for ground planting, the plants will grow better, and the soil needs to be prepared for pot planting; sterilize by soaking the bulbs in a solution of mixed water and potassium permanganate solution for half an hour; Start planting, add nutrient soil to the pot and plant it with bulbs.

It is best to use a higher quality lily bulb variety, so that you can survive faster, and it is best to buy a single bulb when buying, not a multi-head. The multi-headed bulbs produce very small flower sails and low ornamental value, so you should choose the bulbs that grow more full, robust and have no broken seed coat.

Lily bulbs are best planted in the ground, as there will be more room for the roots to grow and nutrients in the soil will be fully absorbed. If you plant in a pot, you need to choose a more suitable soil to ensure that the soil is loose and breathable and contains more nutrients.

The bulbs can be treated with carbendazim or potassium permenate, mixing water and solution at a ratio of 1:100. Then use scissors to trim the rotten roots of the bulb and soak it in the solution for about 30 minutes.

Then apply a small amount of rooting powder solution to the root system, let it dry naturally, and then start planting.

The length of the buds of the bulbs is usually purchased is 3 4 cm, and the prepared nutrient soil is added to the pot, filling the soil to the height of the pot 2 3. Then put the bulbs into the pot, keeping the distance between each bulb at 4 cm, and then fill the remaining 1 3 in the pot with soil, and you can only plant a maximum of 3 bulbs in one pot.

The lily bulb planting method is:

1. Prepare loose and breathable soil, and disinfect the soil before planting.

2. Select plump, disease-free lily bulbs, soak them in water for a period of time, and then put them on a damp cloth to germinate.

3. Put the bulbs of lilies in the soil, then cover them with a thin layer of soil, and then water them appropriately.

4. Place the lilies in a warm, moist and sunny place for maintenance.

Lily balls

Lily bulbs are an ornamental plant in the Netherlands, which requires a soil depth of 20 cm to 25 cm with a temperature of less than 22 cm, and a row spacing of 15 cm by 20 cm. Most of the lily bulbs from China come from the Netherlands, and in the north, they are planted in large quantities around June and end at the end of October, and the bulbs from October to mid-January come from Chile.

The difference between the Dutch ball and the Chilean ball is very simple, one is the two-year ball and the other is the current year's ball. Dutch balls are purchased, refrigerated, purchased from December to January each year, and the following year comes to China, that is, the two-year balls, and the Chilean balls are new, and the peaty soil of the two is also leaky or very different, a peaty soil, Chile's sawdust that looks like China, and I don't know what it is.

It is planted all year round in the south of the return, and it is also planted in a large area in June, and all but the month of the year is the Dutch ball, and the remaining March is the South American ball and the Chilean ball.