How to mix the sound card, how to tune the sound card to sound good

Many users who start GE200 will encounter a problem, that is, how to use GE200 to connect to the computer to complete the recording, then today our CHRIS teacher, for you to record a tutorial**, if you want to try to record users, be sure to come and see Oh! Let's get into the study time!

Question 1: How to tune the sound card on the computer to sing well Don't tune the effect of **, keep the original sound. Only tune the singing voice.

According to the characteristics of the human voice, the key adjustment is the parameter balance, the mid-frequency volume (db decibels) is slightly larger, the low frequency is less, and the high frequency is relatively larger, so that the sound is clearer and more pleasant.

Other adjustments: Remove the echo to set it to 0, and adjust the reverb to a certain polish but not a muddy effect (you listen to the effect yourself).

I don't know what sound card yours is, the specific effect also needs to be adjusted according to each person's voice characteristics and personal preferences.

Question 2: How to debug the sound card to sound good This is to be tuned according to your voice and microphone, if you want to tune it, you can ask me, I do this.

Problem 3: How to debug the sound card to sound good Reduce the noise of the vocals, make appropriate equalization, adjust the volume ratio with the accompaniment, and add appropriate reverberation.

Sound card debugging is such a process.

Question 4: How to tune the sound card to sing well Look at what sound card you have and what microphone you have. These need to be debugged independently according to the sound of your device to be effective.

Question 5: Hello, I would like to ask how to tune the sound card to sound good According to the performance of the sound card, the sound quality of the microphone and the recording of the human voice, it is comprehensively measured and adjusted.

But the effect that suits others is not necessarily suitable for you, and it is better to find someone to debug it remotely for you.

How to tune specifically, to debug in the DSP connection diagram of KX, everyone, each tuner's debugging is different, there is no fixed mode and parameters, you have to adjust according to your actual situation, so how big the tuning is not necessarily.

Question 7: How to debug the sound card to sing well Of course, adjust the equalization and add the appropriate reverberation according to your own sound characteristics.

Of course, you also need to have a certain amount of singing skills.

Question 8: How to debug the sound card to sound good This needs to be debugged according to personal sound characteristics and preferences.

For example, if there are nasal and dental sounds, you need to eliminate nasal and dental sounds. If you like to have a lower voice and a higher pitch, turn it down or up.

In addition, the reverberation effect is added, and the appropriate amount of reverberation and delay time will make the singing sound better.

However, like Senran Broadcast, the 2nd generation sound card does not need to be debugged, plug and play.

Simulate 9 major special effects of live special effects, and easily play **, chat, singing, live broadcast and other application scenarios.

Question 10: How can the mobile phone sound card become more sound-sounding, and it can't be tuned unless it is connected to the computer sound card.

Method. 1.Right-click on the computer and click Properties.

2.On the page that opens, click Control Panel Home.

3.On the page that opens, click Hardware & Sound.

4.Click Manage audio devices.

5.Click on the sound test at the bottom right of the page.

6.Click the microphone at the end of the interface and turn on the special effects switch on the left.

7.When the effect switch is on, you can adjust the following four tone switches at will.

Question 1: How to adjust the reverb KX-2 with an external sound card Hello, thank you for your support! If you feel that the reverberation effect is not reverberant or is not obvious, please perform the following steps:

1.Please see that the second silver knob (effect volume) on the left side of the sound card rotates left and right to adjust the reverb volume;

2.Please press the first silver knob on the left side of the sound card (effect type), if your sound card is the Legend Edition, it will be the sixth without reverb effect, and if you are the Ultimate Edition, it will be the sixth without reverb effect.

Question 2: How to tune the reverberation of the external sound card There is no reverberation in singing, but you can also solve the problem by setting the second half of the burial of this **, and their settings are the same.

Question 3: How can I turn off the reverberation of the external sound card when recording? 1.The volume buttons have a software compositing turned him off.

2.Turn off the synthesis channel in the mix options of your recording softename.

3.It may be your MIC quality problem, high-quality recording needs a closed speaker (house) + high-fidelity mic head + transmission data cable is also very critical, point: anti-interference.

Question 5: Does the innovative external sound card turn on the microphone effect to start the mix? Do you need to take a hook with the microphone effect (** hall)?

It needs to be dispensed and sold, and turning on the microphone is not exactly the same as turning on the reverberation. You need to check the effect style, such as the so-called ** hall, bathroom, basement and other effects, and choose the effect you like.

Question 7: How to adjust the reverberation of Tianyun external sound card? May I ask which sound card of Tianyun is yours?,Question 8:Is the external sound card not reverberant **broken?,I don't know much about this problem.,But you can check whether the sound card driver is installed or destroyed.。 If it's okay here, just type dxdiag in Start-Run to check the directx sound and ** check it inside.

Question 9: How to mix the external sound card I don't know which model of Kesosi you are! The Ultimate version is adjusted by the knob and remote control on the sound card!

The Legend Edition is adjustable by the knob and control panel on the sound card! PK3 is a sound card on the knob, control panel, rack can be adjusted! The P10 relies on control panel and rack adjustment!

Question 10: How to set the mixing function of the sound card Right-click the sound icon in the lower right corner of the system, that is, the "small speaker" icon, and select "Recording Device" in the pop-up menu.

Go to the Sound Recording Options dialog box, right-click anywhere in the blank space of this tab, and select "Show Disabled Devices".

A grey "Stereo Mix" tab appears, which is disabled by default and needs to be opened manually.

Electronic sound is an effect caused by over-trimming and straightening, and reverberation is the effect of creating space for sound. And the general external sound card, if there is such a sound function, in fact, if this sound effect is only used for playback. Then your recording actually has no effect in it.

Of course, now many domestic anchor sound cards, with loopback, can record the sound delay effect of the sound card for you. Generally, sound cards like our professional recording do not come with these features. Occasionally, there are some of them, but they are not actually used during the production process.

It's all with better effects plug-ins. The use of the effect is based on the feeling of listening and the positive experience of the yardage to judge how much to use, not to say, there are certain parameters required to use, and the use of the effect has never been any standard.