I want to top up with a prepaid card, how do I do it?

Method steps.

1: First of all, to buy a recharge card, you can go to the local mobile business hall to buy, the face value is not equal to 2: Put the card over, you will see the "dial***** password:

Serial number "**3: Turn on the mobile phone, press the few digits after "dial**" "**4: Enter the mobile phone number to be recharged according to the voice prompts, the voice will prompt the machine to press the " " number directly, other mobile phones please enter the number and then press the " " key to end.

5: Finally, the voice will prompt that the payment is successful. Text messages will also be sent. "Dear mobile customers, you have successfully paid ** yuan with *year*month*day.

Precautions. Just listen to the voice prompts, and don't make mistakes in the number input. Tip: Please re-enter it when you do it. Using a recharge card is an advantage and a hassle.

Due to the differences in business content in each province, you can call the local 10086 for consultation for specific situations. Take Henan Province as an example:

Step 1: After purchasing the card, scratch the seal to see the PIN on the card.

Step 2: Method 1: Customers can dial the free recharge** when the mobile phone is normal or when it is down, and recharge according to the voice prompts.

Method 2: Customers can log in to Henan Mobile's online business hall - "Online Payment" - "Card Recharge", or use a mobile phone recharge card to recharge according to the prompts.

The recharge card has instructions on it.

First, scratch the password on the recharge card, and then call the recharge hotline on the recharge card, and follow the prompts.

2. Enter the mobile phone business hall - > click on recharge payment - > find the recharge card recharge inside, and then you can enter the recharge card information to recharge.

3. The recharge card can be exchanged for real money, click on my wallet in WeChat > click on mobile phone recharge > there is a row of small print at the bottom, click on more services in the lower right corner - > find the charge card at the bottom to exchange money - > you can fill in your own recharge card information in it, and then the charge card can be exchanged for change, which can be viewed in the WeChat wallet.

Summary. First of all, the password column and the membrane on the surface of the recharge card should be scraped open; Then, according to its operation guide, turn on the mobile phone, enter the recharge password, enter the mobile phone number, and then click "Confirm", it displays: Recharge successfully, it's good.

How to use a mobile phone recharge card.

First of all, the password column and the membrane on the surface of the recharge card should be scraped open; Then, according to its operation guide, turn on the mobile phone, enter the recharge password, enter the mobile phone number, and then click "Confirm", it displays: Recharge successfully, it's good.

At present, it supports SMS, dial-up and online business hall for recharge.

1. Voice recharge: 1. The national unified voice access code is 11888. You can use China Telecom's fixed** or mobile phone, or you can use China Mobile's or Unicom's mobile phone to dial the voice access code, and recharge according to the voice prompts.

Dial method: 11888 —>Select the language type—>Select the recharge payment object—> Enter the account number to be recharged—>Enter the password of the recharge payment card—> the recharge result prompt. Format of the account number being topped up:

1. Fixed **account: area code **number. 2. Mobile phone account:

Mobile phone number. 3. Broadband account: broadband account code.

2. SMS recharge: Customers can send SMS through China Telecom's mobile phone to pay for the recharge of this machine or other accounts. How to send:

1. Send SMS**701 recharge card password to 10001 through your mobile phone to recharge the local number. 2. Send SMS**701 mobile phone number and recharge card password to 10001 to recharge other numbers. 3. Online business hall recharge:

China Telecom online business hall (**: self-service - recharge payment - recharge card recharge, enter mobile phone number, recharge card password and verification code. You can directly enter a top-up account and a top-up payment card password to top up the account, or you can choose to charge multiple cards or one card to charge multiple numbers.

On the recharge page, select the "Mobile Recharge Card" recharge method, then select your recharge card type, then select the amount you want to recharge, and enter your'Mobile recharge card number and password, click "Next" to enter the payment page, then confirm whether your recharge card number and password are correct, and finally click "Next" to pay successfully.

Note: The recharge amount must be the same as the face value of the recharge card, otherwise the recharge will fail, and the loss caused by this will be borne by the recharger.

The specific operation is shown in the following figure:Since the mobile recharge card recharge is paid by a third-party platform, after the recharge is successful, please wait patiently for 2-3 minutes, and then go to "My Account" to check whether the recharge is successful.

A recharge card is a common recharge method, which allows users to recharge their account balance by purchasing a recharge card without using a bank card or paying for electronic payment methods such as Nabibao. This article will explain how to use a top-up card.

After entering the recharge card information, the user needs to confirm the recharge information, including the recharge amount and account information, etc., and click the "OK" button to complete the recharge operation.

Users can purchase recharge cards on major e-commerce platforms or offline physical stores, usually the recharge card will be marked with the applicable recharge platform and denomination, and users need to pay attention to the recharge card corresponding to their account.

2.The validity period of the top-up card is limited, and the user needs to use the top-up card within the validity period.

If it is a Unicom recharge card, you can recharge it in the following ways:

Log in to the online business hall on the home page and click "Payment", "Pay Phone Bill", "Recharge Card";

After logging in to the mobile business hall client, click "Service", "Payment", "Recharge Card";

You can use the machine to recharge the "CZ Recharge Card Password" and send it to "10010"; Other numbers are recharged with "CZ Recharge Card Password Recharged Number" and sent to "10010";

Dial 10011 and enter the recharge mobile phone number, card number, and password according to the voice prompts, and you can dial directly when roaming, or you can add the area code +10011 to recharge.

The above path is subject to the actual information displayed on the page.

There are two ways to use the recharge card: 1. Enter the mobile phone number through the online business hall recharge and payment menu, select the recharge card to recharge, and enter your recharge card password; 2. All China Mobile mobile phones (including Global Pass, Dynamic Zone, and Shenzhou Xing) can use mobile phone recharge cards across the country to pay for other mobile customers in this region, this province or other provinces. Anhui Province fixed** can also use mobile phone recharge cards across the country to pay for mobile customers in this province or other provinces.

Dial the recharge number 13800138000, select the recharge process, enter the mobile phone number to be recharged and the password of the recharge card according to the prompt tone, and the system will notify you of the success of the operation after the recharge operation is completed. China Mobile customers can make 13800138000 calls in Chinese mainland free of charge, and fixed-line calls are charged normally.

My recharge card dialed 10086 and asked me to enter my password. After I entered my password, it prompted that I entered the password incorrectly. Is this recharge card a void card?

Here's how to use the top-up card:

1. Scrape the password column and the membrane on the surface of the recharge card; Then, according to its operation guide, turn on the mobile phone, enter the recharge password, enter the mobile phone number, and then click "Confirm", it displays: Recharge successfully! That's it, finally, check the balance of the local phone bill.

Check it out. 3. First, voice recharge: the national unified voice access code 11888You can use China Telecom's fixed** or mobile phone, use China Mobile and China Unicom mobile phones to dial the voice access code, and recharge according to the voice prompts.

Dialing method: Operator** - > Select language type - > select the recharge payment object - > Enter the account number to be recharged - > enter the password of the recharge payment card - > the recharge result prompt. Format of the account number being topped up:

1. Fixed **account: area code **number. 2. Mobile phone account:

Mobile phone number. 3. Broadband account: broadband account code.

4. 2. SMS recharge: Customers can send SMS through the mobile phone to charge for this machine or other accounts. Sending method: 1. Send SMS** recharge card password to the recharge local number.

I know I really have my stomach five minutes and my stomach on five continents.

The opening was passed through the sail shares, and the braised pork rice was sung to the Buddha, oh oh, 9 hungry.