What should I do if the apple X falls into the water, why does the apple x get into the water for no

2. Shut down. After scooping it up, it should be shut down quicklyOperation method:

Press and hold the [Power Button];

If you can't turn off by pressing and holding the [Power Button], you can press and hold the [Home Button] and [Power Button] at the same time to force the shutdown;

3. Remove the phone case.

It is estimated that all friends have protective cases such as mobile phone cases on their iPhones, so they must take off the phone cases after turning them off, which is to prevent the water in the phone cases from seeping into the iPhone and then damaging the motherboard;

4. Wipe the outside of the iPhone body.

After removing the phone case, use a dry towel or other paper towel to dry the water on the outside of the iPhone body.

5. Take out the SIM card.

After completing the above steps, quickly remove the SIM card and place it in a dry and ventilated place;

6. Absorb the accumulated water in the small pores of the iPhone body.

After completing the above operations, remember to blot up the water in the small holes in the external crevices of the iPhone body;

iphone

As a new generation of Apple's flagship mobile phone, the X has been tested for dust and water resistance, and has an IP67 rating. This level of waterproof can already support the mobile phone to stay in a pool less than ten meters deep for a period of time, so even if the mobile phone falls into the water, there is no need to be afraid and anxious, and you can continue to use it after drying it on the surface.

Extended Materials. iphone

X (pronounced iPhone in English.)

TEN) is a special edition of Apple's 10th anniversary released at the 2017 Apple Fall New Product Launch Event at the Steve Jobs Theater, ApplePark's new headquarters, at 1 a.m. Beijing time on September 13, 2017.

iphone

X uses double-sided glass, built-in inch OLED super Retina screen, screen resolution reaches 2436*1125, PPI is 458, and iPhone

X supports 3DTOUCH and Dolby

vision、true

TONE and HDR display technology, and it is available in two color options: Space Gray and Silver.

Because of the iPhone

The X has a full-screen design, so the physical Home button has been eliminated, but the new iPhone X brings a new operating experience, and Siri can be activated by voice and pressing the side button.

How to deal with the water after the iPhone is ingressive.

1.Turn off the phone as soon as possible, cut off the power, and do not try to turn it on again to avoid causing a short circuit in the motherboard.

2.Remove the SIM card and use a tissue or cloth to remove water from the outside and crevices of the phone.

3.If there is light water ingress, you can wrap the phone with a paper towel, put it in a bag and put it in a small bag of desiccant.

4.The mobile phone cannot be turned on after entering the water, most of the chips such as the motherboard and CPU are short-circuited and burned, and it is recommended to send it to the after-sales service center for repair immediately.

Don't try the following wrong methods after your phone gets into water.

1.Don't make the phone sloppy. Because under the constant shaking, the liquid will swim inside the machine, and the moisture may enter deeper and burn the internal chip of the machine.

2.Do not use the hot air of a hair dryer to dry the core phone for a long time. iPhones are now all metal bodies, and metal conducts heat easily, which will blow off the solder joints of the motherboard inside the machine, causing the motherboard to malfunction.

3.Do not attempt to charge a phone that has been flooded. An iPhone that gets into the water may have water stains inside, which can burn out the motherboard when it is powered on and cause a more serious failure.

4.Do not leave your phone for a long time. In the case that it cannot be used normally after two or three days after general treatment, it should be sent for repair immediately, and long-term placement will cause the motherboard to be corroded, or even unable to be repaired.

The Apple X mobile phone can be picked up quickly if it falls into the water, provided that the mobile phone does not have serious wear and tear. The new Apple X phone has IP67 dust and water resistance, but the water and dust resistance is not permanent and will decline with daily use and wear and tear. If your device is frequently immersed in water, it may gradually lose its waterproof function due to liquid erosion or impact, and eventually the device will become unusable after water ingress.

1. If the iphonex falls into the water, you should immediately take the phone out and turn off the power immediately. If the power is not interrupted, it is easy to cause the components in the mobile phone to be short-circuited and burned.

2. You can wrap the fuselage with a paper towel with good water absorption, and you can't shake the water of the mobile phone, because when you throw it, the water of the fuselage will spread inside, so that the water will come into contact with more components, which will cause worse consequences. You can use the cold air of a hair dryer to dry the water, be sure to cool it, the hot air will damage the screen.

3. If there is a slight ingress of water, you can first wipe the fuselage dry, then wrap the mobile phone with a paper towel, put it in a bag with desiccant, seal it and put it in a slightly heated place.

4. Remove the outer mobile phone case, take out the SIM card, etc., wipe the water on the mobile phone and in the crevices with a paper towel, and the earphone jack and power jack should be blotted dry with cotton swab paper strips.

5. Don't turn on or charge the iphone after taking it out after falling into the water, because the iphone x has a built-in battery that can't be removed, and the motherboard will be short-circuited if it gets into the water, and if it is turned on or charged, the motherboard will be burned, so booting and charging operations are not allowed.

6. Put it in a ventilated place and let it stand for one to two days

The solution after the apple x drops water:

1. Do not turn on the device after water ingress and leak signal stimulation and charging, because the iPhone has a built-in battery that cannot be removed, and the motherboard will be short-circuited after water ingress, and if it is turned on or charged, the motherboard will be burned, resulting in irreparable consequences;

2. After the mobile phone is flooded, do not shake it hard, the water is flowing and will get water on the waterless place;

3. When blowing with a hair dryer, the side of the tank cannot be opened to the maximum temperature at once, and the high temperature hot air will cause damage to the LCD screen;

4. Wipe the circuit board and other places with anhydrous alcohol, and then try to turn on the machine, because the alcohol volatilizes quickly, the water on the circuit board can be volatilized together;

5. If the water ingress is serious and the water ingress time is relatively long, it needs to be disassembled, and it should be sent to the maintenance center for repair as soon as possible.

The solution after the apple x drops the water is the return to the sock method:

1.Do not turn on and charge after water ingress, because the iPhone has a built-in battery that cannot be removed, and the motherboard will be short-circuited after water ingress, and if you turn on or charge, the motherboard will be burned, resulting in irreparable consequences;

2.After the mobile phone gets into the water, do not shake it hard, the water is flowing and will get the water in the place where there is no water;

3.When blowing with a hair dryer, it can't be turned on to the maximum temperature at once, and the high temperature hot air will cause damage to the LCD screen;

4.Wipe the circuit board and other places with anhydrous alcohol, and then try to turn on the machine, because the alcohol leakage is characterized by rapid volatilization, the water on the circuit board can be volatilized together;

5.If the water ingress is serious and the water ingress time is relatively long, it needs to be disassembled, and it should be sent to the maintenance center for repair as soon as possible.

2. Turn off the main machine.

After scooping it up, it should be shut down quicklyOperation method:

Press and hold the [Power Button];

If you can't turn off by pressing and holding the [Power Button], you can press and hold the [Home Button] and [Power Button] at the same time to force the shutdown;

3. Remove the phone case.

It is estimated that the iphones of the friends are covered with mobile phone cases and other protective cases, so the wide traces must be taken off after the phone is turned off, this is to prevent the water in the mobile phone case from seeping into the iphone and then damaging the motherboard;

4. Wipe the outside of the iPhone body.

After removing the phone case, use a dry towel or other paper towel to dry the water on the outside of the iPhone body.

5. Take out the SIM card.

After completing the above steps, quickly remove the SIM card and place it in a dry and ventilated place;

6. Absorb the accumulated water in the small pores of the iPhone body.

After completing the above operations, remember to blot up the water in the small holes in the external crevices of the iPhone body;

The solution after the apple x drops water:

1. Do not turn on and charge after water ingress, because the iPhone has a built-in battery that cannot be removed, and the motherboard will be short-circuited after water ingress, and if it is turned on or charged, the motherboard will be burned, resulting in irreparable consequences;

2. After the mobile phone is flooded, do not shake it hard, the water is flowing and will get water on the waterless place;

3. When blowing with a hair dryer, it can't be turned on to the maximum temperature all at once, and the high temperature hot air will cause damage to the LCD screen;

4. Wipe the circuit board and other places with anhydrous alcohol, and then try to turn on the machine, because the alcohol volatilizes quickly, the water on the circuit board can be volatilized together;

5. If the water ingress is more serious and the water ingress time is longer, it is necessary to return the socks to disassemble the machine, and send them to the maintenance center for repair as soon as possible.

1. First of all, turn off the power of the mobile phone as soon as possible, drop it into the water when the power is on, and shake it dry, but don't shake off the machine, the idea is to throw out the water in the screen. If there are water droplets left on the screen, there will be traces after the dry grip is broken.

2. Place the mobile phone under a slight heat source such as a spotlight for a desk lamp to let the moisture slowly dissipate. This process takes more than six hours to leak. Do not use a strong heat source such as a hair dryer in a hurry.

3. Shake the phone dry vigorously and drop it into non-corrosive liquid in case of power failure, but don't shake off the machine. If there is no trace on the LCD screen, press the first point of processing.

4. If there is something left on the screen and it is very serious, do not shake the phone dry, because although the electronic circuit can work normally, the screen may be very ugly, and it can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning.

5. Turn off the power of the mobile phone as soon as possible, and drop it into non-clean water when it is powered on, if it falls into corrosive liquid, immediately rinse the machine with clean water. Or immerse the machine in clean water and try to dilute the corrosive liquid inside. Disassemble the machine as soon as possible.

6. Finally, clean it with alcohol or professional washing water, assemble or hand over the disassembled things to the Weinobi repair point, so that the maintenance point can be cleaned and assembled again.