What to do if the iPhone screen is out of order

You may need to force restart your device:

1. On iPhone 8 and later: Press the volume up button and quickly release it. Next, press and quickly release the volume down button. Then press and hold the side button until you see the Apple logo.

2. On iPhone 7 or iPhone 7 Plus: Press and hold the side button and the volume down button at the same time for at least 10 seconds until you see the Apple logo.

3. On iPhone 6s and earlier, iPad, or iPod touch: Press and hold the Home button and the top (or side) button at the same time for at least 10 seconds until you see the Apple logo.

Other. iPhone: These are all relatively common failures. It's just that all of a sudden the screen fails and you can't click on the screen.

This is generally how this is done.

1. I have fallen, or I have fallen not long ago, the screen touch screen has been loosened, and after a period of time, the wiring will fall off directly.

Second, if it has been flooded, it can be used again when it is dry, as if it is fine. In fact, the motherboard must be cleaned, otherwise the circuit will rust and there will be problems after a period of time.

3. High imitation charger and charging cable. Many people give the bag when they buy it, and take it back is a high imitation, and after a period of time, it hurts the power supply and directly scraps the machine, especially the Hong Kong version of the mobile phone.

Fourth, charging while playing with your phone can also hurt your phone. Sometimes the current is too high and burns the inner screen.

Is there any way to fix this, check a special section, if the line is loose, change the line. If the inner screen is broken, it is recommended to bring your mobile phone to the regular Apple customer service service center for inspection and repair.

Extended information: iPhone daily care screen:

1. Fear of unstable voltage: Generally, when the finger touches the capacitive screen, it will "suck" a little current, and then the screen will evenly transmit power from the four corners to the position where the thumb is located, and use this to do positioning.

Therefore, the capacitive screen will "drift" or even fail when the transmission voltage is unstable, and it is best to charge it immediately when the power is less than 20%.

2. The capacitive screen is extremely afraid of static electricity: it is easy to break through the capacitive screen. Although the layer of glass on the surface of the capacitive screen mobile phone has undergone a certain antistatic treatment, it does not mean that it can resist the static electricity of the human body in winter, and many people like to paste an inferior screen sticker on it that is easy to generate static electricity.

If the screen fails, you can basically change the screen.

Summarize a few points about the methods of Apple mobile phone screen failure, you can compare them and see if you can solve them.

First, the problem of screen contact surface.

Sometimes the iPhone screen fails because the screen is too dirty or too stained. You can start by looking for a cloth to clean the screen.

2.Using hand cream or using the touchscreen immediately after using your hands may also be unresponsive, so try to keep your hands dry while using your phone.

3.Junk phone film can also cause poor quality phone film to slip and replace.

Second, the voltage is unstable.

Unstable voltage can also cause the screen to malfunction. When the transmission voltage is unstable, the capacitive screen will "drift" or even fail. Check the remaining battery level and try to charge it when the battery level drops below 20.

Please click Enter a description.

Third, there is a problem with the operation of the mobile phone system.

1.If it's not a problem with the screen itself, it could be that the system is running. Babies can try a button to clear their memories (press the power button, press the home button when the page is closed). If not, try restarting your phone.

2. The invalid touch screen is sometimes related to the iOS system version, or it is too old, or the new system is unstable, and this problem is only ......Admit it. You can try it by referring to the method above.

3. If there is no response above, you can restart the phone and try it, and finally determine that the hardware is broken, and you can send it for repair.

Please click Enter a description.

4. Precautions for daily use.

1.Do not place your phone on the speaker or magnetic screws. A capacitive screen that is close to the electromagnetic field will fail.

2.Do not put your iPhone at a higher temperature, as it may cause the touch screen to malfunction when the temperature reaches around 40 degrees.

3.Don't put pockets on your phone, put your coat in your pockets or use your phone. If you have to put a pocket, don't look inside the screen, because the screen can easily be wiped off and static electricity.

There are many people who like to buy Apple's mobile phone, because the Apple mobile phone looks good and has a smooth speed, so it has a good reputation, but there will be problems with the Apple mobile phone after a long time, such as the mobile phone screen failure. So what should I do if the screen of my iPhone is out of order?

1. Battery aging: The aging of the battery is likely to lead to the failure of the mobile phone screen, and there will also be aging, resulting in the slow response of the mobile phone.

2. Change the screen: If the screen of the mobile phone sliding does not respond, it will be very possible that the outer screen of your mobile phone is broken, and you can consider changing the external screen at this time.

3. The line is loose: sliding to unlock is a built-in line, if the connection is not in good contact, it will lead to the failure of the mobile phone screen, you can disassemble the phone cover, move the line under the SIM card, if not, you can ask someone to help get it down.

4. Shutdown and restart: If the screen of the Apple mobile phone fails, you can try to press and hold the shutdown button and the circular primary key at the same time, and it can be turned off in a few seconds, and then restart the phone.

If the above methods don't work, then you have to go to the repair shop to repair it, they specialize in repairing mobile phones, and there will definitely be a better solution.

Here are a few ways to try:

1. In case of mobile phone screen failure, you first need to clean the mobile phone screen, and the static electricity of the mobile phone screen may also cause the touch screen to fail, so you only need to gently wipe the entire screen with your hands. Or you can try to remove the protective film to clean the screen.

2. You can also try to press the lock screen button back and forth a few more times. In many cases, the failure of the smart touch screen screen screen screen is due to software conflicts or incompatible stools, so it is possible to recover by pressing the lock screen button back and forth a few times.

Repair method. 1. The touch screen and buttons are all out of order (some are normal when they are turned on, and all of them are out of order for a while): soldering or replacing the touch IC; Soldering or replacing the CPU; Write software (the key is out of order, and the touch is normal because a key is stuck).

2. The touch screen is out of order. The buttons are normal: change the touch screen. Add soldering jujube or change touch IC, plant CPU, check for disconnection or short circuit. (There are also bad software and CPU with normal use, but it is rare).

3. The touch screen is biased, which can be corrected, but it is still biased after correction: Deliberately deviate from the factory or grid chip (the last 1m) when restoring the factory or grid code (the last 1m) to change the touch screen.

Then change to a new one, and there is definitely nothing wrong with trying it. If your phone has been used for too long and the device is aging, of course there will be a dysfunction of the function. iPhones can also break.

What to do if the screen of the iPhone is out of order: go to a professional repair place to take a look, maybe there is a problem with the bus.

1. The failure of the screen is due to the local charge on the surface, which is commonly referred to as the electrostatic charge of the macro and vertical, which makes it impossible to judge whether there are fingers or other conductors pressed on it. Rubbing it in your pocket, pressing it vigorously frequently, dusty on the screen, sweating on your hands, or dry in winter with static electricity on the human body itself may cause partial charge of the screen.

2. In addition to the electrostatic electricity caused by dryness in winter, temperature is also an important factor, the capacitive screen has relatively strict use conditions, such as temperature, humidity, etc., theoretically the ambient temperature of the capacitive screen is required to be 0-35. In winter, the temperature in the north is generally lower than 0, so it is natural that the screen may not work.

iPhone phone screen failure solution:

1. Unplug the data cable.

Many mobile phones occasionally experience screen failure when connecting data cables. This may be a problem with the quality of the data cable, and it is recommended that you use the original Apple data cable.

2. Turn the lock screen on again.

If you bump into it** swipe to answer and can't move, you can press the lock screen button first, close it and then open it to swipe it!

3. The screen is dirty.

Mobile phones are often in close contact with our hands and bags, and are easily affected by sweat, oil stains, and dust, which may also cause the mobile phone to lose its friendliness on the touch screen. It can be wiped clean with a computer liquid crystal cleaning solution.

4. Prevent static electricity.

There is static electricity in the human body, just like when we wear sweaters in winter and suddenly crackle, static electricity will affect the screen induction and cause the operation to fail! Wipe the screen 2-3 times in one direction with the entire palm of your hand and you're good to go

5. Use qualified films.

In order to protect the screen, many people put a film on the surface of their mobile phones. Inferior screen argument stickers are very easy to produce static electricity! It is recommended to tear off the film and try it, and choose a qualified mobile phone film in the future.

Doesn't it sound simple? Don't look simple, these 5 tricks can solve the problem of 99% of mobile phone screen failures. Of course, if the phone screen is broken due to water or accidental dropping, we recommend that you send your phone to an Apple official authorized repair point for professional testing and repair.

What to do if the screen of the iPhone suddenly loses its ominous song.

The first thing to do is to restart the iPhone6, press and hold the "Home button" and "Power button" at the same time until the white Apple logo appears on the screen, which means that the iPhone has been forced to restart at that time.

The reason why the screen of the Apple phone fails is that the screen is broken, and this needs to be replaced with a new screen to solve the problem.