ABOUT PARTITIONING UNDER DISK MANAGEMENT IN WIN7 SYSTEM

7 8 Normally, because there should be a 20G partition is automatically used by the system for backup, and it is more troublesome to install the XP system on the win 7 system, if you install the win7 system on the xp system, you can install it directly, but you have to format all the disks on the win 7 system first, in order to install the xp successfully, the following is the tutorial I found for you on the Internet:

7 8 If your current Win7 is installed in the C disk, enter the BIOS and set the optical drive as the first boot device, and then use the WinXP installation disk to boot the computer, pay attention to this installation disk must be a normal installation version, absolutely not a clone version!!

After the computer boots up from the CD, you will be prompted to press any key to boot from cdrom....At this time, press any key, and then the computer will automatically start the installer of WindowXP, press the F8 key to agree when the software terms are displayed, and then you will be asked to select the disk to install, select the D disk, and install it.

After installation, you can enter Windows XP normally,At this time, you will find that you can only enter Windows XP and cannot enter Win7,Okay,Then the most critical step is to be carried out,Insert the installation disk of Win7 under Windows XP (if there is no disk of Win7, you can extract the installation file of Win7 to a folder (for example: X: Win7),Then change the "X:" in the text to "X: Win7", The main thing we use here is the "file" in the installer. Locate the file.

Then point Start, Run, CMD, OK. Enter "x: boot bootsect nt60 sys" on the pop-up command prompt window (x represents the drive letter where your optical drive is located, the space before nt60 and sys can not be omitted) restart after entering, you will find that you can enter win7 but you can't enter xp, it doesn't matter, just let it enter win7, start at win7, all programs, accessories, and then right-click "command prompt", enter "bcdedit" in the pop-up window default", and then press enter, and there will be a selection menu that lets you choose whether to start an earlier version of Windows or Win7, of course, "The earlier version of Windows is WinXP."

Also if the reboot or automatically enter win7, please right-click on the computer (equivalent to xp my computer), properties, on the left click advanced system settings, startup and failure recovery "settings", and then "display the operating system list time before the checkmark, and set the time to more than 5 seconds, check whether there are two options in the default operating system, if not, it may be that you entered bcdedit default when there was an error, you need to operate again, If there are two operating system points, reboot is OK.

After entering Win7, we can use BCDEDIT to modify the system boot menu we want!

There can only be a maximum of 4 primary partitions on the same hard drive. If you want to use more partitions, the 5th partition must be a logical partition. If you create a primary partition with four primary partitions, the system prompts you whether to convert the partition to a dynamic disk.

Use the "DiskGenius" software to convert the partition to be compressed into a logical partition, and then compress it to create a new simple volume. If you have any questions, please feel free to follow up.

1. First of all, open the windows 7 system, slide and right-click on the table to select "computer", click "manage", and click to open.

2. Select "Free Space" in the window, select "Expand Volume" in the right-click menu, and click to open it.

3. Select Set the size and name of the disk in the window.

4. Finally, you can see that the disk partition is completed and the problem is solved.

1. Right-click on My Computer and click "Manage".

2. On the left side of "Management", select "Disk Management" in "Storage".

3. Right-click on the C drive partition, the following figure appears, and select "Compress Volume".

4. Enter the amount of space you need.

5. After compression, you can see that there will be an extra green partition of the "unpartitioned disk" in the disk volume, as shown in the following figure

6. Right-click on the available space in step 5 and click "New Partition".

There is nothing wrong with your steps, just a maximum of 4 zones, more than 4 are not supported, partition format, ntfs

1. First of all, open the Windows 7 system, right-click on the desktop to select "Computer", click "Manage", and click to open.

2. Select "Free Space" in the window, select "Extend Volume" in the right-click menu, and click Open.

3. Select Set the size and name of the disk in the window.

4. Finally, you can see that the disk partition is completed and the problem is solved.

How to adjust the partition:

2. Open DiskGenius, select the partition disk, for example: C disk, right-click to resize the partition;

3. Enter the adjusted capacity, and click to start.

Note: Before adjusting the capacity of the C drive, you need to adjust the size of the last partition disk.

For example, for disk C, D, and E, you need to adjust disk E to reduce the capacity of disk E, then adjust disk D, and finally adjust disk C.

Right-click on the computer to manage the disk management except for the c drive, the other right-click and delete the volume, after all are deleted, right-click to create a new volume, resize, and then you can repartition.

Control Panel - System & Security - Administrative Tools - Create and format hard drive partitions.

Summary. Hello dear, <>

The steps to partition and format a hard drive are as follows:1

Click on the Windows Start icon on the taskbar. 2.Right-click on "Computer", then click on "Manage", and finally select "Disk Management".

3.Select the desired partition and right-click to select Format or Create Partition. Extended Resources:

Format is the operation of initializing a disk or partition within a disk, which usually results in all files in the existing disk or partition being erased. Formatting is usually divided into low-level formatting and high-level formatting. Hope it helps.

1How to partition and format a hard drive with +Windows7's disk management function.

Hurry up. Hello dear, <>

The steps to partition and format a hard drive are as follows:1

Click on the Windows Start icon on the taskbar. 2.Right-click on "Computer", then click on "Manage", and finally select "Disk Management".

3.Select the desired partition and right-click to select Format or Create Partition. Extended Resources:

Format is the operation of initializing a disk or partition within a disk, which usually results in all files in the existing disk or partition being erased. Formatting is usually divided into low-level formatting and high-level formatting. Hope it helps.

First of all, make a boot U disk (there is a tutorial on the Internet, not much to say), enter the PE system, open the partition tool, the tools are all the same, click on the quick partition, and you can always be sure.

If you need to plan it yourself, you can also customize the partitions.

Generally, XP keeps the system disk, 12G or more.

Win7 keeps the system disk partition 30G or above.

Win8 keeps the system disk partition 40G or above.

Non-system disk partitions can be directly entered into the system with magic partitions, merge the free disk space to adjacent disks, if there is no data, you can also merge directly, directly delete the partition without data, and add space to adjacent disks.

Right-click on "My Computer" and select "Manage". Disk Management. Then there will be a disk in your computer, right-click you will understand, needless to say later, it is all Chinese you will understand. Restore this will not, if you score a little higher, someone will give you guidance.

1. The viewing category in the upper right corner has been changed to a large icon.

2. Select Management Tools.

3. Select Computer Management.

4. Select Disk Management under Storage.

5. Right-click the disk you want to partition and right-click to select the compressed volume, try not to divide it into C disks 6, enter the compression amount 1g=1024MB

7. Right-click on the newly separated blank disk and select Create a simple volume.

8. Right-click on the newly created simple volume to format it.

1. "Unpartitioned ultra-large D drive" is an incorrect description. If it is not partitioned, there will be no drive letter. If there is a drive letter, it means that the area has been divided, and it cannot be "unallocated space".

For "unallocated space", it must be a new simple volume, and it doesn't matter if it's called E or not, no one stipulates that D must be followed by E.

2. For an existing partition, you can use the method of compressing the volume (in fact, it should be called shrinking) to shrink the partition from the tail forward, and the value calculated by the system before shrinking is the maximum shrinkage value of the partition, which will not be less than half of the original size.

3. In addition to the system partition, the size of other partitions is determined by the user according to the needs of saving the content, which is not reasonable or unreasonable, but too many partitions will affect the response speed of the system.

Normally, no file reads or writes to disk on its own.

If you want to divide into 5 partitions, you can divide up to 3 primary partitions and then the remaining 2 can only be divided into logical partitions.

Enter the amount of compressed space (MB)" is an action that allows you to separate some space from an already existing partition. The bottom row shows what you call the reserved space. If there's anything you don't understand, you can hi me.

But you can try the compressed space you use, it doesn't matter.

Select New Volume Question 2 The number entered is the memory of your partition, not the rest of the memory! 3C disk 40000m, you can set the rest yourself!

Let someone else do the partition for you, usually with a partition master.