The difference between smashing and washing, is there a difference between pressing and smashing

The difference between smashing and washing is as follows:

1. Chips vary differently

When smashing, the dealer will move the chips at the bottom up and cash out at a high level. When the market is washed, the chips are basically unchanged, and they are mainly sold to make a profit.

2. **Chart forms are different:

When washing, there will generally be a black line with a lower shadow, and there will be a phenomenon of opening high and going low or rushing high and falling. When the market is smashed, a small white candlestick appears on the ** chart, and a large number of transactions appear.

3. The stock price increase is different:

When the market is washed, the stock price generally does not rise by more than 30%. When the market is smashed, the stock price will rise by more than 60%.

4. The number of days of duration is different

The washing generally lasts about 5 to 12 days, and the smashing generally lasts for more than 12 days, and may even last up to several months.

2. There is a risk in entering the market, and investment needs to be cautious.

Ping An car owner loan] can get a loan if you have a car, up to 500,000.

What is the difference between smashing and washing?

Smash the plateIt is also a kind of shaking position (that is, most ****, smashing is a kind of market making behavior).

Shake the position (wash the plate.

technical characteristics and disc features.

Shake (wash): In order to clean the floating chips to reduce the selling pressure and reduce the cost of pulling up in the future, the dealer should wash the plate.

Technical characteristics: often inexplicably suppressed, but will quickly (suddenly) stop falling.

Deliberately creating the illusion that the stock price is weak, but it is generally not effective to break below a certain support level (e.g. 10 days, 20 days**).

The washing time is generally not more than two weeks, and the stock price often oscillates up and down during this time, but the ** amplitude is often not deep. (e.g., 600752 trend of Haci shares from April 13 to early May 98).

Pressure plateThis means selling in large quantities.

To put it simply, the large single pressure plate is to use a large amount of money to suppress the stock price at a low position, so as to facilitate it to absorb chips at a low level and reduce its own cost.

It is divided into several cases:

1.Make the sun** appear as a barefoot long black candle, or a doji.

or the black line is equal to the comparison"Unsightly"The graph makes the holders fear and achieves the purpose of shaking the position.

2.So that the second day can open high and rise sharply and squeeze into the rising list, attracting the attention of investors.

3.Sell to yourself, or affiliates, at a low price.

After understanding what a large single pressure plate means, we need to have a brief understanding of its application. We say that in general, the large single pressure plate is a means of operation for the main force or the banker. During the adjustment period, the main force will reduce the stock price by suppressing the stock price by simply opening it, and then buy the price on the dip to reduce the purchase cost, so as to make a profit after the major good news.

It is also possible that the large single pressure plate is the main force or the banker's washing measure.

There are generally two situations for the main force to smash the market, one is that the chips are not enough, one is to absorb funds on dips, and the other is that the stock price has reached a certain level, and the main waiter envy has begun to ship. Huatai**'s one-stop Suizhao wealth management platform - "Shangle Wealth Pass" provides a variety of **financial knowledge through short** and series of courses, and welcome** to understand the old shot.

1.Chip variations are different:

When smashing, the dealer will move the bottom chips up and then cash out high. When the market is washed, the market chips are basically unchanged, mainly through the sale of profits.

The form of the line diagram is not the same:

3.Stock price increases are different:

When washing dishes, the stock price generally does not rise by more than 30%. When the reeds are returned, the stock price will rise by more than 60%.

4.The duration is different for days:

Washing generally lasts about 5-12 days, and smashing generally lasts more than 12 days, or even several months.

The difference between smashing and washing is that smashing is a pressurized washing, which is said to be a good way to absorb chips at a low level.

I heard that there is such an ancient saying on the **, that is, ** to see the line, and the institution to draw the line, this roughly means, that is, it can be used as a technical guide. In fact, smashing is a suppressive shuffle, it is said that this can be a good way to absorb chips at a low level, which is also a common method, once there is a shuffle, then the stock price will be smashed low. It will cause panic psychology, and the washing can be divided into several forms, such as sideways washing, ** mode of washing, each kind of washing, the state of the main force is different, such as the ** type of washing, the main force inside is just intervened, the characteristics of this kind of washing are that they hope to make money quickly, and the performance of the stock price is also up and down, unstable, but it is impossible to want the stock price to fall to the key point, and the sideways washing is different. The main force is only pulled up after a long time of washing, and this situation is different from the former.

Speaking of this, many people must have been clear, what is smashing, what is washing, and the difference between the two, in the operation of the first we have to accumulate more relevant experience, learn financial knowledge, so as to grasp the true intention of the main force and the banker, follow the main force and envy Zhuang Duan answering the family from profit, earn income, and obtain the purpose of capital preservation and appreciation.

The difference between smashing and washing mainly includes four points:

1. Chips vary differently

When smashing, the dealer will move the chips at the bottom up and cash out at a high level. When the market is washed, the chips are basically unchanged, and they are mainly sold to make a profit.

2. **Chart forms are different:

When washing, a yin line with a lower shadow will appear like a pin, and there will be a phenomenon of opening high and going low or rushing high and falling; When the market is smashed, a small white candlestick appears on the ** chart, and a large number of transactions appear.

3. If the stock price does not rise and collapse, it will be the same.

When the market is washed, the stock price generally does not rise by more than 30%. When the market is smashed, the stock price will rise by more than 60%.

4. The number of days of duration is different

The washing generally lasts about 5 to 12 days, and the smashing generally lasts for more than 12 days, and may even last for several months.

Regarding "what is the main difference between smashing and opening a position and smashing and washing?" Let me express my personal opinion here. In **, what is the main difference between smashing to open a position and smashing to wash the market?

In **, whether it is smashing the market to build a position or smashing the market, its original intention is also the same, its ultimate purpose is to let the shareholders flee in panic, sell the ** in their hands, and then they can absorb cheap chips to smash the market, and the position is generally more profitable than washing, and the general form is to smash the stock price directly from the connection to below -5, and it is even possible to present it in the way of a falling limit. <>

The second method of the main force is to like to learn to wash the plate The purpose is also to build a position with the sand table, similar to the washing plate is generally the upper and lower ** time-sharing chart or the ** chart of up and down **. It is what we often call a roller coaster, **for a while** for a while**, you don't know whether he wants to **or**, so when you think of this, shareholders will panic sell**, so that the main force can absorb cheap chips. <>

When our main force is built, he will definitely pull up the plate, and after the plate is pulled, it will be shipped. Often, shareholders are easily attracted by the elongated time-sharing chart when the dealer ships the goods, so the main shipment also has a certain means, so that the shareholders will hurry up**the**. <>

After reading it, I hope you can give me a like and pay attention

First of all, the change is completely different, and the dealer in the smashing of the general chips will move up, there will also be a cash-out of the sedan faction situation, the chassis is not particularly big changes, and then will also be sold through the way of the first to make a profit.

The main difference between the two is that the subject of the thing is different, the benefits generated are different, and the environment in which they occur is also different.

The former just started over, and the latter just didn't want it all and left.