What to do if the plastic tablecloth is uneven, what to do if the soft glass table mat is always une

Updated on home 2024-03-05
17 answers
  1. Anonymous users2024-02-06

    1. Press a piece of glass on top of the plastic tablecloth.

    2. Iron with an iron to the appropriate temperature, and it will be good after cooling.

    3. If the time is too long, it is recommended to change a tablecloth.

    Many plastic and plastic tablecloths are polyvinyl chloride.

    PVC), although it is not toxic, the vinyl chloride released when exposed to heat is a toxic substance that may cause liver cancer.

    If vinyl chloride is added with plasticizers, it will also contain heavy metals such as lead and chromium, which are particularly easy to adsorb in the oil in high-temperature food and sweat on the hands, endangering people's health. Moreover, the colorful tablecloth, due to the addition of various pigments, fades and mixes into food, which is also not good for health.

    It is best not to use a tablecloth made of plastic, if you must use it, be sure to pay attention to the material of the tablecloth, if it is polyethylene.

    Don't buy it, choose polypropylene.

    The material will be safer. In contrast, natural cloth products are safer, chemical-free, and easier to clean.

    It is also important to note that if the tablecloth becomes hard or cracked, do not use it again.

  2. Anonymous users2024-02-05

    Use an aluminum cup or an iron cup filled with boiling water and press it in an uneven place. Wait... After softening, press other places, and press the soft places with sinking things. When the temperature is normal, he won't be uneven...

  3. Anonymous users2024-02-04

    (1) This is caused by a long time, in the use of soft glass natural aging and corrosion caused by the oxidation and yellowing of some things, there is no way to change, can only be replaced with a new piece.

    Characteristics of soft glass tablecloths:

    1. The surface is smooth, no cracks, no bubbles, uniform color, heat resistance, cold resistance, aging resistance, heavy pressure resistance, strong acid and alkali resistance, and good light transmittance. Long service life. To a certain extent, it can be used as a substitute for glass, but its superiority is incomparable with glass.

    In particular, the impact resistance and tensile characteristics of soft glass not only ensure its long service life, but more importantly, it does not cause harm to the human body. Its warm in winter and cool in summer and soft texture make it particularly comfortable for desktop office workers.

    2. Anti-light, no deformation, no breakage, no hardness, high elasticity.

    3. Soft texture and easy to write.

    4. Heat resistance 100, cold resistance-30, strong acid and alkali resistance, heavy pressure resistance, help to improve the efficiency of desktop work, reduce cleaning costs for restaurants, and increase the elegant and beautiful taste of restaurants.

    5. Antistatic. Excellent electrical insulation performance, inert chemical properties, non-toxic and tasteless, no adverse reaction to the human body, and anti-radiation performance, which can effectively prevent the generation of static electricity and dissipate static electricity. It has high toughness and high elasticity, which can effectively play a shock-absorbing role when paving the floor or working surface, prevent the collision and strain of precision products, and effectively protect the appearance of new products from damage.

    It is a must-have product for use on the desktop of precision instruments in telecommunications, electronics, computer companies, and households.

  4. Anonymous users2024-02-03

    Method 1: Press between two plates, press hard, and hold for a period of time.

    Method 2: Bask in the sun for a while.

    Method 3: Use a garment steamer, spray steam up, and then press the heavy object.

    If it is really uneven, you can only replace it with a new one, and be careful not to heat it locally when using, otherwise you will soon find that it is uneven.

  5. Anonymous users2024-02-02

    Is it normal to put hot dishes directly on top of the meal, which has caused the plastic mat (soft glass) to have thermal deformation. Try pressing between two slabs and letting them bask in the sun for a while to see if they can level out.

  6. Anonymous users2024-02-01

    Ironing with an electric iron on medium and low grade, pad cloth or paper is very effective against local bulges.

  7. Anonymous users2024-01-31

    Press the briquetted glass on top, adjust it to the appropriate temperature with an iron, and cool it down. If it's too long, it's better to change it.

  8. Anonymous users2024-01-30

    First put the base batch putty, polish it flat, and then paste it, wallpaper.

  9. Anonymous users2024-01-29

    Wrinkles on the plastic tablecloth are difficult to flatten. It can be pressed in the middle with two glass plates, and the iron is used to slowly conduct heat. If the plastic tablecloth is small. You can use flat cardboard (be sure to be flat and smooth).Iron the same with an iron.

    After the tablecloth is used, it should be cleaned immediately, so that the cleaning effect is the best, especially vinegar, wine, sugar, salt and other water-soluble stains, before cleaning, you can use vinegar, salt, etc. to soak the tablecloth, take it out after three minutes to clean, spin dry, which can effectively remove vinegar, wine, sugar, salt and other stains.

    Stains such as grease and protein should be removed with alkaline solution, the method is: add 5ml of alkaline solution to 5L of clean water, after it is completely dissolved, put it in a tablecloth and boil, about 5 minutes, wait until the oil and protein stains are completely gone, take it out and wash it.

  10. Anonymous users2024-01-28

    Take a flat-bottomed water cup with hot water in it, put it on the table, and lay a towel on it.

  11. Anonymous users2024-01-27

    Press it with a book, and it will be flat after a long time.

  12. Anonymous users2024-01-26

    Try it after ironing, it may be aging!

  13. Anonymous users2024-01-25

    1) Spray a little water under the tablecloth and press it with a weight.

    2) Place a hot towel on a plastic tablecloth and press things again.

    3) Turn the tablecloth upside down, and press it again.

    4) You can also temporarily remove the tablecloth and put it on the bed to flatten it.

    1) Spray a little water under the tablecloth and press it with a weight. 2) Place a hot towel on a plastic tablecloth and press things again.

    Definition Term: tablecloth Pinyin: zhuō bù Definition:

    Tablecloth, also known as tablecloth, English name: tablecloth is an item that is covered on the countertop and table top to prevent stains or add beauty. Basic Explanation [tablecloth] Tablecloth for tabletops for landscaping or protection Detailed explanations Cloth or cloth-like sheets for decoration or protection on tabletops.

    Mao Dun's "Creation": "The small desk against the south window is covered with a dark green tablecloth. ”

    Textile: polyester-cotton slub printed tablecloth, polyester-cotton knitted lace tablecloth, cotton mercerized mesh buckle tablecloth, polyester silk warp knitted jacquard tablecloth, cotton mercerized jacquard tablecloth, polyester-cotton plain woven printed tablecloth, polyester-cotton plain embroidery tablecloth, linen knitted lace tablecloth, polyester linen plain weave patch tablecloth, vs tablecloth, star silk tablecloth.

  14. Anonymous users2024-01-24

    Spray a little water under the tablecloth and press again, you can try it.

  15. Anonymous users2024-01-23

    Blow with hot air and press with a book.

  16. Anonymous users2024-01-22

    You find a flat place, use a relatively large flat-bottomed container to fill it with hot water, put it in your folded place, don't take too long, and press it with a flat plate when it becomes soft, if this method doesn't work, you can only change it to a new one.

  17. Anonymous users2024-01-21

    Find a flat place, use a larger flat-bottomed container to fill it with hot water, put it in your folded place, don't take too long, and press it with a flat plate when it becomes soft, if this method doesn't work, you can only change to a new one.

Related questions
7 answers2024-03-05

It seems that the two of you seem to be arguing all day long because of money problems and getting divorced. In this society, there are rich people and poor people, but more of them are ordinary people, they don't earn much money, their husbands don't earn much, and they have children, as long as they live frugally, they should be fine. It's just that you always see that other people's families have houses, and other people's husbands make more money and envy them, and they sprinkle their grievances on their husbands, which not only hurts the feelings of the two, but also has a great impact on the children. >>>More

11 answers2024-03-05

Cat Eats Plastic Foreign Body Solution:

1. If the kitten is eating plastic by mistake, it should be stopped immediately, and then open the cat's mouth to observe whether there is plastic residue, and continue to observe whether the cat's appetite and spirit are normal. >>>More

15 answers2024-03-05

It's the same as my family! But there's one thing: don't run out of food! >>>More

19 answers2024-03-05

It is recommended to go to the hospital for eye examination, and then do the ** plan according to the condition. Patients with fresh vitreous hemorrhage should be given bed rest and hemostatic drugs; For patients with old bleeding, drugs that promote turbid absorption should be used, such as lutein with liquid lutein, oral vitamin C, dibazole, etc., and intramuscular injection of iodine or hyaluronidase. In severe cases, vitrectomy may be used if it is generally ineffective. >>>More

15 answers2024-03-05

If the ground is uneven, it can be leveled by these 3 methods, self-leveling, cement mortar, gypsum, etc. Self-leveling is to treat the ground, polish off the protruding ground, and apply the surface agent after leveling, which needs to be applied twice. Cement mortar leveling is to dilute the cement slurry to ensure that it can flow, but not too thin, after the dough agent is dry, the cement mortar is pushed away and bulldozed, and it needs to be pressed evenly with a roller. >>>More