How to deal with the phenomenon of blurred screen in iPhone XR?

If the phone screen is black.

For screen color anomalies such as splash screen, blurred screen, white screen, and red screen, it is recommended to:

1.It is recommended to restart the phone to try: Press and hold the power button and the down volume button at the same time for more than 7 seconds to restart the device;

3.If it comes with system software, it is recommended to update the system version of the mobile phone to try: please go to Settings - About the phone (about the device) - Software update (system update) - Update (please back up the data in the device before upgrading).

Try. If the problem persists, it is recommended to bring the purchase invoice, warranty card and mobile phone to the local mobile phone purchase office for repair or to a nearby mobile phone repair shop for repair.

1. Take it to the maintenance point for testing first. It may be that the camera cable fell loose on the ground!

2.Turn off your iPhone and restart it, then turn it on.

3.Or it may be caused by a problem with the iPhone system, 4If you have tried all the above methods and still can't turn on the camera, please contact Apple after-sales service. Ask them to help check your phone to see if it's caused by a malfunctioning hardware on your phone.

Hello! If your iPhone screen has touch failure, black screen, color change, white bar stripes or 3D Touch function failure, you need to replace the screen accessories.

1.The details of the original screen** are still subject to the store.

2.Non-original screens** are extremely low, but often come with poor manufacturing workmanship, poor compatibility and the risk of damaging other hardware.

The reason why the phone has a blurred screen.

1. First of all, there is the possibility that the cable is broken. Most of the materials of the mobile phone screen are LCD, and the broken cable of the LCD will cause the LCD screen to blur. This one is also more difficult to fix.

2. The second is that the LCD screen itself is broken, such as the inside of the table is broken, then the screen must be flowered, so it can only be replaced with a new one.

3. Again, sometimes we use mobile phones to convert from one page to another, and we can't react at once, so we get stuck there, showing the phenomenon of blurred screens, if we turn off or forcibly buckle the battery and turn it on again, the normal operation of the machine will be restored. In this case it may be a problem with the software, check the memory card.

Is there too much software installed, causing the weight of the mobile phone to be too heavy, and there is a short period of confusion during operation, and the screen is blurred.

4. There is also a possibility, there is a problem with the installed flash software, maybe this version of flash conflicts with other software on the phone itself, if you can, uninstall it and reinstall another version, try to see if the problem may be solved.

5. In order to avoid affecting your daily use, it is recommended to bring your mobile phone to the regular Apple customer service center on the 8th floor, Block B, East Third Ring Road, Jianwai SOHO, East Third Ring Road for inspection and maintenance.

There are several situations when the screen of the Apple phone suddenly goes blank:

1.If you have a problem with the mobile phone system, you need to connect to the computer and flash the machine thoroughly in duf mode;

2.If the mobile phone screen is problematic, it is more necessary to replace the screen;

3.The connection screen on the motherboard of the mobile phone has a problem, the contact is poor or broken;

4.Poor contact or parts problems on the motherboard of the mobile phone need to be detected.

This kind of blurred screen is generally a system software conflict, and there may also be a contact problem between the motherboard and the screen line；Check as follows: Restore the previous configuration of the machine system, and if it doesn't work, flash the machine again. If it is still a blurred screen, it is a problem with the motherboard, screen, and cable screen.

iphone xr

The front camera uses a TrueDepth camera that supports Face ID.

In the early morning of September 13, 2018, Beijing time, the iPhone XR was officially released at the 2018 Apple Autumn New Product Launch Conference, with a starting price of $749. The sale officially went on sale at 3:01 on October 19, 2018, Beijing time. In Chinese mainland, Hong Kong and Macau.

The iPhone XR released in three regions supports dual Nano-SIM physical cards.

Product configuration

iPhone XR has an all-screen screen.

The glass is designed with an aluminum bezel and is equipped with an inch liquid Retina display. The iPhone XR brings the A12 Bionic chip with a next-generation Neural Engine, the TrueDepth camera system, Face ID, and a single-lens camera.

A camera system that can take portrait photos and portrait lighting effects. The body of iPhone XR is made up of an aircraft-grade aluminum bezel and a glass panel that provides splash and dust resistance up to IP67. It also has the battery life you need for a day and is available in six colors.

The above content refers to Encyclopedia-Apple XR

What is the reason for the striped screen of Apple XR mobile phone screen change?

1.If the cable is broken, the seepage is that the cable connecting the screen and the motherboard is burned or loose, so it's good to change the cable.

2.The screen is broken, and the LCD screen is broken, there is no way to hold this kind of equipment, and it is shouting that it is the most troublesome to destroy, and it is very expensive to replace the entire screen assembly.

3.If the motherboard is broken, it is also to replace the entire motherboard, but this probability is relatively small, but it is not ruled out, the way is to replace the motherboard, and the motherboard is generally cheaper than the screen.

4.Theme compatibility issues, this is where problems are most likely to occur, because themes are very complex, and compatibility issues often arise. You can change back to the default theme to try, if the screen glitch disappears, you can conclude that the theme is incompatible.

If the screen of the mobile phone is aging or there is a problem with the cable, it is best to go to the 4S store to check it.

It is recommended to restart the phone to see if it can be used normally, if not, it means that this is a kind of screen blurry, and the reasons and solutions for the blurry screen are as follows:

1. If the cable of the mobile phone is broken, the cable connecting the screen and the motherboard is burned or the receiver is badly touched.

2. The screen is broken and the screen needs to be replaced, ** higher.

3. The motherboard is broken, this probability is relatively small, but it is not excluded that the solution is to change the motherboard rock suspicion, which can be taken to the Apple maintenance center for maintenance. It is mainly caused by the failure of the screen group, that is, the problem of the screen line IC.

1. The mobile phone has been dropped, bumped, or used for many years. may cause damage to the phone cable. It is recommended to send it to a mobile phone store or after-sales maintenance to replace it with a new mobile phone cable.

2. It may be due to water or bumps that cause the screen in the mobile phone to be broken. It is recommended to send it to a mobile phone store or after-sales repair to replace it with a new screen in the phone.

3. There may be a problem with the current system firmware of the Apple phone. It is recommended to redo the system firmware of the mobile phone, or update and upgrade the new version of the system.

4. It is recommended to bring the equipment to the after-sales center for maintenance and processing, and the service fee will be waived for online appointment.

It is recommended to restart the phone to see if it can be used normally, if not, it means that this is a kind of screen blurry, and the reasons and solutions for the blurry screen are as follows:

1. If the cable of the mobile phone is broken, the cable connecting the screen and the motherboard is burned or the contact is poor, so it is good to go to the after-sales store to replace it.

2. The screen is broken and the screen needs to be replaced, ** higher.

3. The motherboard is broken, this probability is relatively small, but it is not ruled out that the solution is to replace the motherboard, which can be repaired by Apple. It is mainly caused by the screen group, which is caused by the IC problem of the screen line.

There are also different screen screens, mainly in the following situations:

1. The screen appears black or colored. Horizontal or vertical bars, generally the problem of LCD cables, although there may seem to be only one on the screen, but because the LCD cable is directly connected to the display glass mirror, it is difficult to repair once it is broken, unless it is a professional technician. The only way to do this is to return to the factory and replace the hardware.

2. Occasional fonts or images are garbled when booting or using, which may be due to the bug of the software version, or it may be the cause of damage to the CPU or font library, flash memory, etc., the former can be solved by flashing the firmware, but the latter needs to be repaired, and it also needs to be returned to the factory.

3. If the screen appears cloud-like spots, then there is no doubt that the LCD screen is damaged, and there is only a possibility of replacement, no repair.