-
LCD TV has advantages over plasma and other technologies in terms of brightness、Clarity、Power consumption, etc.,For 1366 768The resolution is already very good (higher than plasma)。 At present, LCD TVs are basically TFT thin-film transistors,Due to the increase in the size of LCD panels,The driving circuit and transistor of pixels cannot and do not need (technical and cost problems) to make the pixel area of a computer monitor so small,Therefore, the pixel size will inevitably increase(At the same time, the brightness and viewing angle can be improved,This is a relatively high requirement for TV),The resolution will decrease,However1366 768The resolution is enough for our daily film and television**, Since people watch TV from a distance, unlike computer monitors, it can fully meet the requirements.
In fact, if you look closely, you can clearly see that the pixels of the TV are much larger than the monitor.
-
Three suggestions for you, 1. Reinstall the graphics card driver.
2. Change to a separate display.
3. Look at the manual of the TV, how to connect to the computer, some settings will be different from the general LCD.
-
LCD TV is used as a monitor does not need a high resolution, generally the resolution of 1360x768 pixels can be used as a computer monitor, if the resolution of the TV is high enough, the resolution can also be set higher.
Generally, as long as the LCD TV can be connected to the monitor, the resolution of the LCD TV can be directly set to the maximum resolution.
In addition, because the pixel pitch between LCD TVs and monitors is different, LCD TVs are significantly higher than monitors, so if an LCD monitor is used as a display, users will feel that the accuracy of the computer's display will decrease, which is a normal phenomenon.
-
Generally, it is appropriate to set the resolution to 1360x768 pixels, and if the TV size is large enough, the resolution can be set higher.
When a TV is connected to a computer and used as a monitor, the resolution can be set as follows:
1. Right-click on the computer to pop up the menu, select the screen resolution to enter the settings interface;
2. In the resolution setting interface, first set the monitor to the TV;
3. After selecting the monitor as the TV, the computer will automatically detect and recommend the best resolution, and the user can adjust the resolution according to the actual effect of the TV display to achieve the best display effect.
4. Select the best resolution and press "OK".
5. At this point, the synchronization of the TV and the computer screen is completed.
-
The LCD TV does not need a high resolution to be used as a monitor, as long as the LCD TV can be connected to the monitor, and the resolution of the LCD TV can be set to its maximum resolution.
Because the pixel pitch between LCD TV and monitor is different, LCD TV is significantly higher than the monitor, so if the LCD monitor is used as a display, the user will feel that the accuracy of the computer display will decrease, which is a normal phenomenon.
-
LCD TV can be used as long as there is a computer interface,For exampleVGA interface、DVI interface、HDMIInter, etc.,The most common computer graphics card is VGA,There are many haveDVI,As for the resolution, you can set it in the system。
-
It is possible to have larger pixels on TV, but the focus is still on the number of pixels. The main thing is that the distance is large. The more pixels, the better.
However, the more pixels there are, the more video memory is required, so. The reason why the monitor doesn't do much. Only if the resolution comes up.
That's why it's small.
-
Yes, the pixels of a TV are indeed much larger than those of a computer, just like if you enlarge a ** on the computer, it will be distorted. So the picture is worse than what the computer displays.
-
Not necessarily. Some monitors with TV capabilities are low-resolution, but some are high-resolution, depending on the design, and cannot be generalized.
-
Can you watch the display of a TV can be understood as an LCD TV?
Generally speaking, the resolution of a computer monitor is higher than that of an older LCD TV (with a small dot pitch).
**The (expensive) LCD TV is about the same.
Ask the installer to come not necessarily to install it on the wall, but it can also be to assemble the bottom seat and debug the TV. You don't need to hire an installer if you know it yourself. If you use an old-fashioned analog signal, after the TV is plugged in, use the remote control to press out the menu to automatically search for programs, and wait for the search to end. >>>More
The substance in the LCD screen is a polymer crystal that can flow. Solid-state crystals in general are directional, so many of their physical properties are also directional. Liquid crystals have the fluidity of liquids while having the directionality of general crystals. >>>More
This lz is not very detailed, computer frequency hopping, there are many factors. Graphics card overheating, LCD problems, driver problems, monitor cable problems, can cause frequency hopping, if LZ is playing frequency hopping, there is a high probability that the graphics card driver, or, the graphics card memory is too small.
Set the refresh rate to 60 or try it by default.
1. Change a mobile phone first****, if the network speed of this mobile phone is normal, it means that the first mobile phone is faulty, uninstall or close the software that is not commonly used, clean up the memory, and even restore the factory settings, if it is not good, the hardware failure of the mobile phone itself needs to be replaced or repaired. >>>More