The problem of connecting the computer to the LCD TV is urgent

Set the refresh rate to 60 or try it by default.

There is a monitor driver in windows, but there is no TV driver.

For 1024x768 60hz and 1360x768 60hz, our LCD TVs need to be manually adjusted for the recognition of the Lingling Festival. Consistent with the way of switching output, switch to display single screen or dual screen through the function key FN + the corresponding output switch key of the notebook (see your computer instruction manual).

Connect to the computer with VGA, there is a picture and no sound?

Please check if there is an audio cable.

The audio port near the VGA port is connected to a small audio cable with a small diameter, which is generally available in the market.

After connecting the laptop, how to choose a single screen or dual screen display with you?

Consistent with the way of switching output, switch to display single screen or dual screen through the function key FN + the corresponding output switch button of the notebook (please refer to your computer's instruction manual).

Connect to the computer with VGA, the resolution is 1024*768 1360*768, can't fill the screen?

1) Please confirm which resolution the input signal is and what is the refresh rate?

2) Our LCD TV needs to be manually adjusted for 1024x768 60hz and 1360x768 60hz.

First of all, please confirm the input resolution, and then adjust the TV to computer mode, enter the option Fine-tune Synchronization Select the correct resolution in the input signal, if the customer selects the standard for widescreen mode, the TV will not be full, only if the wide is selected as the full screen, the screen will be full. Connecting a VGA to a computer, the screen is not displayed or the display is not compatible with the signal?

1) Please connect the computer back to the original monitor, set the resolution: 1024*768 1360*768, the number of hertz: 60, and connect it to the TV after restarting, and check if there is a boot screen.

2) If there is no desktop display after the boot screen, it is recommended to restart the computer, press F8 to enter the safe mode when booting up, select VGA mode to enter the operating system, and check whether there is a desktop display.

3) If you connect a notebook, please perform the same operation as 1) 2), if it still does not reflect, please close the current screen of the notebook, only the external display screen (TV) for display. (The method of turning off the display screen of the notebook varies according to different brands, and it is recommended that users consult the after-sales service of their notebooks).

Connect the notebook, LCD TV display desktop without icon?

If the LCD TV has a computer desktop display, it means that the LCD TV has received the computer signal, so it can prove that there is no problem with the LCD TV in this place, but as for why there is no desktop icon display, it is a problem with the external equipment settings, so please check the computer's instruction manual or consult the computer's service**.

Connect to LCD TV, laptop display desktop without icon?

1) When using VGA connection, there are not many requirements, as long as the user's computer can input 1024x768 60Hz signal, it can be used.

2) When using the HDMI method to connect, there may be compatibility issues due to the uneven graphics cards on the market.

Treasure!! There may be the following reasons why the LCD TV is connected to the computer and shows that there is no signal

1.Poor cable connection: Poor cable connection or poor contact will lead to poor signal transmission, resulting in no signal.

2.Resolution mismatch: The resolution mismatch between the macro fibrillator of the computer and the LCD TV can also lead to no signal. You need to adjust the resolution on your computer to match the LCD TV.

3.Incorrect display mode setting: Incorrect display mode settings on computers and LCD TVs can also lead to no signal. You need to set the correct display mode on your computer, such as extended mode or mirror mode.

4.Graphics card driver issues: Computer graphics card driver issues can also cause no signal. You need to update or reinstall the graphics driver.

5.Incorrect selection of LCD TV signal source: If the LCD TV signal source is not selected correctly, it will also lead to no signal. You need to choose the right source on your LCD TV, such as HDMI or VGA.

6.Other hardware issues: Other hardware issues with your computer or LCD TV can also cause a no-signal situation. Need to check if the hardware is working properly.

To connect your computer to your LCD TV, you'll need to use an HDMI, VGA, or DVI interface. Here are the steps to connect:

1.Make sure that your computer and LCD TV have the appropriate interfaces. If your computer and LCD TV have HDMI ports, use an HDMI cable to connect them.

If both your computer and LCD TV have VGA ports, use a VGA cable to connect them. If your computer console and LCD TV have DVI interfaces, use a DVI cable to connect them.

2.Plug one end into the corresponding port of the computer host, and the other end into the corresponding port of the LCD TV.

3.Turn on the LCD TV and select the correct input source. You will need to select the input source that corresponds to the interface you are using.

4.Turn on the computer and adjust the resolution of the rock voltaic rate. You'll need to set the resolution of your computer's host computer to match that of your LCD TV.

5.If you need to transfer sound from your computer to your LCD TV, use an audio cable to connect your computer to the LCD TV's audio input.

6.Make sure all connections are secure, then start using your computer console and LCD TV.

The steps to connect the LCD TV to the computer host are as follows:

1.Make sure that both the LCD TV and the computer have HDMI ports.

2.Use an HDMI cable to connect the LCD TV to the computer console.

3.Turn on your computer and LCD TV and make sure they are both in working order.

4.On your computer, right-click on an empty space on the desktop and select Display Settings.

5.In "Show Settings", select "Multiple Displays", and then click "Detect".

6.The computer will automatically detect the LCD TV, and then you can choose to "expand these displays" or "copy these displays".

7.If you select Expand these displays, you can drag apps and windows onto your LCD TV to be on your TV.**

8.If you select Duplicate these displays, the LCD TV will display the same content as the computer's console.

9.Adjust the resolution and display mode of the LCD TV to get the best results.

10.Once the connection is confirmed, you can start the content on the LCD TV** on the computer console.

I saw this TV on the Internet that there is an HDMI interface,Look carefully for the kind of flat mouth,It's better to find the VGA interface in the explosion of character。 Your computer is a desktop and shouldn't have an HDMI port. You can buy an HDMI to VGA cable, the VGA (that is, the port you are now connected to the monitor) is connected to the computer, the HDMI is terminated to the TV, and the TV is tuned to the HDMI channel with the remote control.

Right-click anywhere on the desktop to appear in the pop-up window, click [Screen Resolution] - enter the [Change Display Appearance Interface] to set the multi-monitor (or dual) display setting.

Yes, open the button on the back of the VIDIO, and see if it's a VGA interface, which is the 15-hole blue one, and if you buy a 3M VGA two-end cable directly, it's OK. If you don't need to buy an S terminal to VGA cable, three M.

Connect the cable of the S terminal, and then get the audio cable. Adjust the TV signal input source, turn on the computer, click the desktop right button, enter Properties, and set it.

Your TV doesn't have an interface, it doesn't work.

Does your TV have VGA and HD ports? If not, you can't connect it.

Dear ASUS users, Hello!

If the machine is a win7 or above system, press the win key + p key to see if you can cut through.

In addition, take a look at the graphics card driver, some machines may need to be upgraded or downgraded to support external connections.

Finally, you can restart with an external connection, if it can be displayed together, it basically means that the hardware and compatibility are fine, and you need to work hard in the direction of software.

Set the source to HDMI on your TV. (Some TVs are also called PCs, etc..) ）